Specification sheet Wheel Loader Ref caterpillar-928f-wheel-loader
Caterpillar 928F
The Caterpillar 928F is a wheel loader with an operating weight of 24,625.64 lb (11,170 kg), a 120 hp engine, and a 2.62 yd³ (2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
24,625.64lb
11,170kg
Engine power
120hp
89.5kW
Net Power Bucket capacity
2.62yd³
2m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 928F sits below the median for its class:
- Operating weight 24,630 lb lighter than 85% (n=439)
- Engine power 120 hp less powerful than 90% (n=408)
- Bucket capacity 2.6 yd³ smaller-bucket than 76% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Model | 3116 T | |
| Net Power | 120hp | 89.5kw |
| Gross Power | 128.1hp | 95.6kw |
| Power Measured @ | 2200rpm | |
| Displacement | 402.8cu in | 6.6L |
| Aspiration | Turbo Charged | |
| Bore | 4.2in | 105mm |
| Stroke | 5in | 127mm |
02 Operational Specification
| Operating Weight | 24625.7lb | 11170kg |
|---|---|---|
| Shipping Weight - Empty | 23924.6lb | 10852kg |
| Fuel Capacity | 50gal | 189L |
| Hydraulic System Fluid Capacity | 26.5gal | 100L |
| Cooling System Fluid Capacity | 12.7gal | 48L |
| Transmission Fluid Capacity | 8gal | 30L |
| Front Axle/Diff Fluid Capacity | 6.9gal | 26L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Tire Size | 15.5 and 20.5X25 |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.5mph | 39.5km/h |
| Max Speed - Reverse | 13.1mph | 21.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 24800 KPA,3596-Psi | |
|---|---|---|
| Pump Flow Capacity | 36.8gal/min | 139L/min |
| Raise Time | 6.2sec | |
| Dump Time | 1.1sec | |
| Lower Time | 2.3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.98ft in | 2736mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.62yd3 | 2m3 |
| Bucket Capacity - Struck | 2.23yd3 | 1.7m3 |
| Bucket Width | 8.37ft in | 2549mm |
| Breakout Force | 22233lb | 98.9kN |
06 Dimensions Dimensions
| Ground Clearance | 1.05ft in | 318mm |
|---|---|---|
| Length With Bucket On Ground | 22.79ft in | 6946mm |
| Width Over Tires | 7.79ft in | 2372mm |
| Height To Top Of Cab | 10.48ft in | 3193mm |
| Wheelbase | 9.42ft in | 2870mm |
| Hinge Pin - Max Height | 12.13ft in | 3695mm |
| Reach At Max Lift And Dump | 3.14ft in | 956mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.