Specification sheet Wheel Loader Ref caterpillar-926k-wheel-loader
Caterpillar 926K
The Caterpillar 926K is a wheel loader with an operating weight of 20,498.6 lb (9,298.01 kg), and a 104.6 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
20,498.6lb
9,298.01kg
Engine power
104.6hp
78.1kW
Net Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 926K sits at the heavy end of its class:
- Operating weight 20,500 lb heavier than 91% (n=374)
- Engine power 105 hp more powerful than 84% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3204 | |
| Net Power | 104.6hp | 78.1kw |
| Power Measured @ | 2400rpm | |
| Displacement | 317.3cu in | 5.2L |
| Aspiration | TURBOCHARGED |
02 Operational Specification
| Operating Weight | 20498.6lb | 9298.1kg |
|---|---|---|
| Fuel Capacity | 39.6gal | 150L |
| Hydraulic System Fluid Capacity | 24.3gal | 92L |
| Engine Oil Fluid Capacity | 3.7gal | 14.1L |
| Transmission Fluid Capacity | 9gal | 34.1L |
| Front Axle/Diff Fluid Capacity | 6.6gal | 25L |
| Rear Axle/Diff Fluid Capacity | 6.6gal | 25L |
| Static Tipping Weight | 15220.7lb | 6904kg |
| Turning Radius | 16.7ft in | 5090.2mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 30degrees |
03 Transmission Specification
| Transmission Type | POWERSHIFT | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 18.8mph | 30.3km/h |
| Max Speed - Reverse | 20.1mph | 32.4km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2500psi | 17236.9kPa |
|---|---|---|
| Pump Flow Capacity | 40.2gal/min | 152.2L/min |
| Raise Time | 5.9sec | |
| Dump Time | 1.6sec | |
| Lower Time | 3.6sec |
05 Dimensions Dimensions
| Ground Clearance | 0.94ft in | 286.52mm |
|---|---|---|
| Length With Bucket On Ground | 21.6ft in | 6583.68mm |
| Width Over Tires | 7.6ft in | 2316.48mm |
| Height To Top Of Cab | 10.4ft in | 3169.92mm |
| Wheelbase | 9.4ft in | 2865.12mm |
| Hinge Pin - Max Height | 11.8ft in | 3596.64mm |
| Reach At Max Lift And Dump | 3.2ft in | 975.36mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.