Specification sheet Wheel Loader Ref caterpillar-926e-wheel-loader
Caterpillar 926E
The Caterpillar 926E is a wheel loader with an operating weight of 20,794.01 lb (9,432 kg), a 109.97 hp engine, and a 2.23 yd³ (1.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
20,794.01lb
9,432kg
Engine power
109.97hp
82kW
Gross Power Bucket capacity
2.23yd³
1.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 926E sits at the heavy end of its class:
- Operating weight 20,790 lb heavier than 93% (n=374)
- Engine power 110 hp more powerful than 89% (n=367)
- Bucket capacity 2.2 yd³ larger-bucket than 89% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3204 | |
| Gross Power | 110hp | 82kw |
| Displacement | 317.4cu in | 5.2L |
02 Operational Specification
| Operating Weight | 20794.1lb | 9432kg |
|---|---|---|
| Fuel Capacity | 39.7gal | 150L |
| Hydraulic System Fluid Capacity | 24.4gal | 92L |
| Static Tipping Weight | 14945.2lb | 6779kg |
| Turning Radius | 18.4ft in | 5600mm |
| Tire Size | 17.5-25 12PR |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.3mph | 34.2km/h |
| Max Speed - Reverse | 22.9mph | 36.8km/h |
04 Hydraulic System Specification
| Raise Time | 6sec | |
|---|---|---|
| Dump Time | 1.7sec | |
| Lower Time | 3.6sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.04ft in | 2755mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.23yd3 | 1.7m3 |
| Bucket Capacity - Struck | 1.9yd3 | 1.45m3 |
| Bucket Width | 7.86ft in | 2395mm |
| Breakout Force | 22143lb | 22143- |
06 Dimensions Dimensions
| Ground Clearance | 1.12ft in | 341mm |
|---|---|---|
| Length With Bucket On Ground | 21.83ft in | 6652mm |
| Width Over Tires | 7.65ft in | 2330mm |
| Height To Top Of Cab | 10.54ft in | 3210mm |
| Wheelbase | 9.42ft in | 2870mm |
| Hinge Pin - Max Height | 11.95ft in | 3640mm |
| Reach At Max Lift And Dump | 3.3ft in | 1003mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.