Specification sheet Wheel Loader Ref caterpillar-926-wheel-loader
Caterpillar 926
The Caterpillar 926 is a wheel loader with an operating weight of 20,498.58 lb (9,298 kg), a 104.6 hp engine, and a 1.97 yd³ (1.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
20,498.58lb
9,298kg
Engine power
104.6hp
78kW
Net Power Bucket capacity
1.97yd³
1.5m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 926 sits at the heavy end of its class:
- Operating weight 20,500 lb heavier than 91% (n=374)
- Engine power 105 hp more powerful than 84% (n=367)
- Bucket capacity 2 yd³ larger-bucket than 78% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3204 | |
| Net Power | 104.6hp | 78kw |
| Power Measured @ | 2400rpm | |
| Displacement | 317.4cu in | 5.2L |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 20498.6lb | 9298kg |
|---|---|---|
| Fuel Capacity | 39.7gal | 150L |
| Hydraulic System Fluid Capacity | 24.4gal | 92L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Transmission Fluid Capacity | 9gal | 34L |
| Front Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Static Tipping Weight | 15220.8lb | 6904kg |
| Turning Radius | 16.8ft in | 5105mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 30degrees | |
| Tire Size | 15.5-25, 12 PR (L-2) |
03 Transmission Specification
| Transmission Type | powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 18.9mph | 30.3km/h |
| Max Speed - Reverse | 20.1mph | 32.3km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2500psi | 17236.9kPa |
|---|---|---|
| Pump Flow Capacity | 40.2gal/min | 152L/min |
| Raise Time | 5.9sec | |
| Dump Time | 1.6sec | |
| Lower Time | 3.6sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.1ft in | 2772mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.97yd3 | 1.5m3 |
| Bucket Capacity - Struck | 1.8yd3 | 1.37m3 |
| Bucket Width | 7.78ft in | 2370mm |
| Breakout Force | 24234.41lb | 107.8kN |
06 Dimensions Dimensions
| Ground Clearance | 0.95ft in | 288mm |
|---|---|---|
| Length With Bucket On Ground | 21.65ft in | 6598mm |
| Width Over Tires | 7.63ft in | 2325mm |
| Height To Top Of Cab | 10.42ft in | 3175mm |
| Wheelbase | 9.42ft in | 2870mm |
| Hinge Pin - Max Height | 11.83ft in | 3605mm |
| Reach At Max Lift And Dump | 3.24ft in | 985mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.