Specification sheet Wheel Loader Ref caterpillar-924h-wheel-loader
Caterpillar 924H
The Caterpillar 924H is a wheel loader with an operating weight of 25,644 lb (11,632 kg), a 128 hp engine, and a 2 yd³ (1.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
25,644lb
11,632kg
Engine power
128hp
96kW
Net Power Bucket capacity
2yd³
1.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 924H sits below the median for its class:
- Operating weight 25,640 lb lighter than 80% (n=439)
- Engine power 128 hp less powerful than 86% (n=408)
- Bucket capacity 2 yd³ smaller-bucket than 96% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | C6.6 | |
| Net Power | 128hp | 96kw |
| Power Measured @ | 2300rpm | |
| Max Torque | 496lb ft | 673Nm |
| Displacement | 403cu in | 6.6L |
02 Operational Specification
| Operating Weight | 25644lb | 11632kg |
|---|---|---|
| Fuel Capacity | 59.4gal | 225L |
| Hydraulic System Fluid Capacity | 39gal | 148L |
| Cooling System Fluid Capacity | 10.6gal | 40L |
| Transmission Fluid Capacity | 6.1gal | 23L |
| Front Axle/Diff Fluid Capacity | 5.5gal | 21L |
| Rear Axle/Diff Fluid Capacity | 5.5gal | 21L |
| Static Tipping Weight | 16041lb | 7276kg |
| Turning Radius | 18.2ft in | 5530mm |
| Tire Size | 20.5 R25 |
03 Transmission Specification
| Transmission Type | Standard | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.9mph | 38.5km/h |
| Max Speed - Reverse | 13.5mph | 21.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3755psi | 25900kPa |
|---|---|---|
| Raise Time | 5.1sec | |
| Dump Time | 1.4sec | |
| Lower Time | 2.4sec | |
| Pump Type | Implement Pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.25ft in | 2828mm |
|---|---|---|
| Bucket Capacity - Heaped | 2yd3 | 1.5m3 |
| Bucket Width | 8.33ft in | 2550mm |
| Breakout Force | 21731lb | 9857kN |
06 Dimensions Dimensions
| Ground Clearance | 1.43ft in | 436mm |
|---|---|---|
| Length With Bucket On Ground | 23.45ft in | 7147mm |
| Width Over Tires | 8.18ft in | 2492mm |
| Height To Top Of Cab | 10.59ft in | 3227mm |
| Wheelbase | 9.19ft in | 2800mm |
| Hinge Pin - Max Height | 12.9ft in | 3881mm |
| Reach At Max Lift And Dump | 3.26ft in | 992mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.