Specification sheet Wheel Loader Ref caterpillar-924gz-wheel-loader
Caterpillar 924Gz
The Caterpillar 924Gz is a wheel loader with an operating weight of 23,920.16 lb (10,850 kg), a 130 hp engine, a 1.97 yd³ (1.5 m³) bucket, and a dig depth of 0.33 ft (101.6 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
23,920.16lb
10,850kg
Engine power
130hp
97kW
Net Power Bucket capacity
1.97yd³
1.5m³
Dig depth
0.33ft
101.6mm
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 924Gz sits at the compact end of its class:
- Operating weight 23,920 lb lighter than 89% (n=439)
- Engine power 130 hp less powerful than 84% (n=408)
- Bucket capacity 2 yd³ smaller-bucket than 98% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | 3056T | |
|---|---|---|
| Net Power | 130hp | 97kw |
| Gross Power | 138hp | 103kw |
| Power Measured @ | 2300rpm | |
| Displacement | 366cu in | 6L |
| Bore | 4in | 100.1mm |
| Stroke | 5in | 127mm |
| Rated Net Power | 129hp | 96.2kw |
| Sae J1349 (2) | 137hp | 102.2kw |
| Iso 9249 (1997) (2) | 138hp | 103kw |
| Eec 80/1269 (2) | 138hp | 103kw |
| Sae J1349 (1) | 129hp | 96.2kw |
| Iso 9249 (1997) (1) | 130hp | 97kw |
| Eec 80/1269 (1) | 130hp | 97kw |
02 Operational Specification
| Operating Weight | 23920.2lb | 10850kg |
|---|---|---|
| Fuel Capacity | 59.5gal | 225L |
| Hydraulic System Fluid Capacity | 33.1gal | 125L |
| Engine Oil Fluid Capacity | 5.3gal | 20L |
| Cooling System Fluid Capacity | 10.6gal | 40L |
| Transmission Fluid Capacity | 6.1gal | 23L |
| Front Axle/Diff Fluid Capacity | 5.6gal | 21L |
| Rear Axle/Diff Fluid Capacity | 5.6gal | 21L |
| Turning Radius | 16.7ft in | 5070mm |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.3mph | 39km/h |
| Max Speed - Reverse | 13.5mph | 21.6km/h |
04 Steering Specification
| Steering Angle - Each Direction | 40degrees | |
|---|---|---|
| Minimum Turning Radius - Over Tires | 200in | 5080mm |
| Steering Cylinder, Two, Bore | 2.8in | 69.9mm |
| Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi) | 27.7 gal/min | |
| Maximum Working Pressure | 3000 psi |
05 Transmission Specification
| Forward - 1 (1) | 4.2mph | 6.8km/h |
|---|---|---|
| Reverse - 1 (1) | 4.2mph | 6.8km/h |
| Forward - 1 (2) | 2.3mph | 3.8km/h |
| 2 (2) | 4.7mph | 7.6km/h |
| 3 (2) | 12.2mph | 19.7km/h |
| 4 (2) | 24.2mph | 39km/h |
| Reverse - 1 (2) | 2.5mph | 4.1km/h |
| 2 (3) | 5mph | 8.1km/h |
| 3 (3) | 13.2mph | 21.3km/h |
| 2 (1) | 7.6mph | 12.3km/h |
| 3 (1) | 13.5mph | 21.8km/h |
| 4 (1) | 23.9mph | 38.5km/h |
06 Weights Specification
| Operating Weight | 23920lb | 10850kg |
|---|
07 Tires Specification
| Tread Width | 6.2ft in | 1.9m |
|---|---|---|
| Size | 17.5-25PR (L-2) |
08 Buckets Specification
| Bucket Capacities | 1.7 m3 - 2.1 m3 2.2 yd3 - 2.7 yd3 |
|---|
09 Hydraulic System Specification
| Relief Valve Setting | 3756.5psi | 25900kPa |
|---|---|---|
| Pump Flow Capacity | 40.2gal/min | 152L/min |
| Raise Time | 5.5sec | |
| Dump Time | 1.2sec | |
| Lower Time | 2.7sec | |
| Pump Type | load sensing hydraulic |
10 Axles Specification
| Axle Oscillation | 12degrees |
|---|
11 Operating Specifications Specification
| Static Tipping Load - Full Turn | 15163lb | 6877.9kg |
|---|---|---|
| Breakout Force | 21727lb | 9855.3kg |
| Articulation Angle | 40degrees | |
| Reach - Full Lift And 45 Degrees Dump | 2.1ft in | 0.7m |
| Dump Clearance At Full Lift And 45 Degrees Dump Angle | 9.1ft in | 2.8m |
| Bucket Capacity - With Bolt-On Cutting Edge | 2yd3 | 1.6m3 |
12 Service Refill Capacities Specification
| Cooling System | 10.9gal | 41.3L |
|---|---|---|
| Fuel Tank | 59.4gal | 224.9L |
| Crankcase | 4.2gal | 15.9L |
| Hydraulic Tank | 18.5gal | 70.1L |
| Hydraulic System - Including Tank | 33gal | 125L |
| Transmission | 6.1gal | 23.1L |
| Front | 5.5gal | 20.9L |
| Rear | 5.5gal | 20.9L |
13 Cab Specification
| Rops | SAE J1040 MAY94, ISO 3471-1994 | |
|---|---|---|
| Fops | SAE J231 JAN81, ISO 3449-1992 Level II |
14 Loader Hydraulic System Specification
| Pump Flow - Implement Pump | 40.15 gal/min | |
|---|---|---|
| Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With Sae 10w Oil At 65 Degreesc (150 Degreesf) | 39.5 gal/min | |
| Maximum Working Pressure | 3755 psi | |
| Raise | 5.2 s | |
| Dump | 1.1 s | |
| Lower, Empty, Float Down | 2.7 s | |
| Total | 9 s | |
| Bore (1) | 4.3in | 108mm |
| Stroke (1) | 29.7in | 754.4mm |
| Bore (2) | 4.8in | 120.7mm |
| Stroke (2) | 20.5in | 520.7mm |
15 Bucket Dimensions
| Dump Clearance At Max Raise | 9.06ft in | 2760mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.97yd3 | 1.5m3 |
| Breakout Force | 21727lb | 96.65kN |
| Bucket Width | 8.37ft in | 2550mm |
16 Dimensions Dimensions
| Ground Clearance | 1.2ft in | 365.76mm |
|---|---|---|
| Length With Bucket On Ground | 23.07ft in | 7030mm |
| Width Over Tires | 7.73ft in | 2356mm |
| Height To Top Of Cab | 10.6ft in | 3228mm |
| Wheelbase | 9.19ft in | 2800mm |
| Hinge Pin - Max Height | 12.34ft in | 3759mm |
| Reach At Max Lift And Dump | 2.84ft in | 865mm |
| Carry Height | 1.2ft in | 0.37m |
| Height - Center Of Axle | 2.1ft in | 0.65m |
| Height - Top Of Exhaust Stack | 10.4ft in | 3.17m |
| Height - Top Of Hood | 85.2in | 2164.08mm |
| Height - Top Of Rops/Fops | 10.5ft in | 3.21m |
| Length - Rear Axle To Bumper | 6.4ft in | 1.96m |
| Bucket Pin Height - Maximum Lift | 12.1ft in | 3.69m |
| Overall Height | 15.7ft in | 4785.36mm |
| Overall Height - Bucket Raised | 15.7ft in | 4.79m |
| Overall Length | 23.1ft in | 7040.88mm |
| Rack Back Angle - Carry | 48degrees | |
| Rack Back Angle - Ground | 44degrees | |
| Rack Back Angle - Maximum Lift | 58degrees | |
| Reach At Maximum Lift And 45 Degrees Dump | 2.1ft in | 0.65m |
| Wheel Base | 9.19ft in | 2.81m |
| Wheel Base Length | 9.2ft in | 2.81m |
| Width - Over Tires | 7.9ft in | 2.41m |
| Digging Depth | 4in | 101.6mm |
| Bucket Clearance-Maximum Lift/Carry | 11.1ft in | 3.39m |
| Dump Angle At Maximum Lift | 45degrees | |
| Centerline Of Front Axle To Hitch | 4.7ft in | 1.44m |
| Dump Clearance At Maximum Lift - 45 Degrees | 9.1ft in | 2.78m |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.