Specification sheet Wheel Loader Ref caterpillar-924g-pin-on-wheel-loader
Caterpillar 924G Pin On
The Caterpillar 924G Pin On is a wheel loader with an operating weight of 22,570.93 lb (10,238 kg), a 110 hp engine, and a 1.97 yd³ (1.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,570.93lb
10,238kg
Engine power
110hp
82.1kW
Net Power Bucket capacity
1.97yd³
1.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Caterpillar 924G Pin On sits at the compact end of its class:
- Operating weight 22,570 lb lighter than 97% (n=439)
- Engine power 110 hp less powerful than 99% (n=408)
- Bucket capacity 2 yd³ smaller-bucket than 98% (n=387)
01 Engine Specification
| Engine Model | 3056T | |
|---|---|---|
| Net Power | 110hp | 82.1kw |
| Displacement | 366.2cu in | 6L |
02 Operational Specification
| Operating Weight | 22571lb | 10238kg |
|---|---|---|
| Fuel Capacity | 52.4gal | 198L |
| Hydraulic System Fluid Capacity | 39.7gal | 150L |
| Static Tipping Weight | 17359.2lb | 7874kg |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24mph | 38.5km/h |
| Max Speed - Reverse | 13.5mph | 21.6km/h |
04 Hydraulic System Specification
| Raise Time | 5.1sec | |
|---|---|---|
| Dump Time | 1.4sec | |
| Lower Time | 2.4sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.36ft in | 2850mm |
|---|---|---|
| Breakout Force | 25195lb | 25195- |
| Bucket Capacity - Heaped | 1.97yd3 | 1.5m3 |
| Bucket Width | 8.37ft in | 2550mm |
06 Dimensions Dimensions
| Ground Clearance | 1.21ft in | 368mm |
|---|---|---|
| Length With Bucket On Ground | 23.1ft in | 7039mm |
| Width Over Tires | 7.73ft in | 2356mm |
| Reach At Max Lift And Dump | 3.15ft in | 960mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.