Specification sheet Wheel Loader Ref caterpillar-920-wheel-loader
Caterpillar 920
The Caterpillar 920 is a wheel loader with an operating weight of 18,607.02 lb (8,440 kg), a 80 hp engine, and a 1.2 yd³ (0.91 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
18,607.02lb
8,440kg
Engine power
80hp
59.7kW
Net Power Bucket capacity
1.2yd³
0.91m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 920 sits above the median for its class:
- Operating weight 18,610 lb heavier than 81% (n=374)
- Engine power 80 hp more powerful than 63% (n=367)
- Bucket capacity 1.2 yd³ smaller-bucket than 58% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | 3304 | |
|---|---|---|
| Net Power | 80hp | 59.7kw |
| Displacement | 427.2cu in | 7L |
02 Operational Specification
| Operating Weight | 18607.1lb | 8440kg |
|---|---|---|
| Fuel Capacity | 39.1gal | 148L |
| Hydraulic System Fluid Capacity | 19.6gal | 74L |
| Static Tipping Weight | 29519.9lb | 13390kg |
| Tire Size | 15.5-25 12 PR (L-2) |
03 Transmission Specification
| Number Of Forward Gears | 4 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 27.3mph | 43.8km/h |
| Max Speed - Reverse | 14.5mph | 23.2km/h |
04 Hydraulic System Specification
| Raise Time | 6sec | |
|---|---|---|
| Dump Time | 1.2sec | |
| Lower Time | 3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.09ft in | 2770mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.2yd3 | 0.91m3 |
| Bucket Width | 8.01ft in | 2440mm |
| Breakout Force | 8020lb | 8020- |
06 Dimensions Dimensions
| Length With Bucket On Ground | 18.71ft in | 5700mm |
|---|---|---|
| Width Over Tires | _- | 2700mm |
| Height To Top Of Cab | 10.33ft in | 3148.59mm |
| Hinge Pin - Max Height | _- | 3753mm |
| Reach At Max Lift And Dump | 2.43ft in | 740mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.