Specification sheet Wheel Loader Ref caterpillar-916-wheel-loader
Caterpillar 916
The Caterpillar 916 is a wheel loader with an operating weight of 18,937.71 lb (8,590 kg), a 84.49 hp engine, and a 1.97 yd³ (1.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
18,937.71lb
8,590kg
Engine power
84.49hp
63kW
Gross Power Bucket capacity
1.97yd³
1.5m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 916 sits above the median for its class:
- Operating weight 18,940 lb heavier than 84% (n=374)
- Engine power 84 hp more powerful than 67% (n=367)
- Bucket capacity 2 yd³ larger-bucket than 78% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3204 | |
| Gross Power | 84.5hp | 63kw |
| Displacement | 317.4cu in | 5.2L |
02 Operational Specification
| Operating Weight | 18937.8lb | 8590kg |
|---|---|---|
| Fuel Capacity | 32.5gal | 123L |
| Hydraulic System Fluid Capacity | 18.8gal | 71L |
| Static Tipping Weight | 14607.9lb | 6626kg |
| Turning Radius | 18ft in | 5460mm |
| Tire Size | 17.5x25 (L-2) |
03 Transmission Specification
| Number Of Forward Gears | 3 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 15.5mph | 24.8km/h |
| Max Speed - Reverse | 15.6mph | 25km/h |
04 Hydraulic System Specification
| Raise Time | 6.3sec | |
|---|---|---|
| Dump Time | 1.3sec | |
| Lower Time | 3.1sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.69ft in | 2648mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.97yd3 | 1.5m3 |
| Bucket Capacity - Struck | 1.72yd3 | 1.31m3 |
| Bucket Width | 7.86ft in | 2395mm |
| Breakout Force | 18838lb | 18838- |
06 Dimensions Dimensions
| Ground Clearance | 1.06ft in | 322mm |
|---|---|---|
| Length With Bucket On Ground | 20.9ft in | 6369mm |
| Width Over Tires | 7.65ft in | 2330mm |
| Height To Top Of Cab | 10.34ft in | 3150mm |
| Wheelbase | 8.86ft in | 2700mm |
| Hinge Pin - Max Height | 11.49ft in | 3500mm |
| Reach At Max Lift And Dump | 3.04ft in | 926mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.