Specification sheet Wheel Loader Ref caterpillar-914g2-wheel-loader
Caterpillar 914G2
The Caterpillar 914G2 is a wheel loader with an operating weight of 17,530 lb (7,951.48 kg), and a 95 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
17,530lb
7,951.48kg
Engine power
95hp
70.9kW
Net Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 914G2 sits above the median for its class:
- Operating weight 17,530 lb heavier than 76% (n=374)
- Engine power 95 hp more powerful than 75% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
01 Engine Specification
| Net Power | 95hp | 70.9kw |
|---|---|---|
| Net Power - Sae J1349 | 95hp | 70.9kw |
| Maximum Gross Power - Iso 14396 | 101hp | 75.4kw |
| Rated Net Power - 2,300 Rpm - Sae J1349 | 95hp | 70.9kw |
| Rated Net Power - 2,300 Rpm - Iso 9249/Eec | 97hp | 72.4kw |
| Rated Net Power - 2,300 Rpm - Iso 9249 (Din) | 98hp | 73.1kw |
| Net Power - Iso 9249 Eec | 97hp | 72.4kw |
| Net Power - Iso 9249 (Din) | 98hp | 73.1kw |
| Maximum Gross Power - Iso 14396 (Din) | 102hp | 76.1kw |
02 Operational Specification
| Operating Weight | 17530lb | 7951.5kg |
|---|
03 Transmission Specification
| Travel Speed 1 | 5.6mph | 9.1km/h |
|---|---|---|
| Travel Speed 2 | 22mph | 35.5km/h |
04 Weights Specification
| Operating Weight | 17530lb | 7951.5kg |
|---|---|---|
| Optional Counterweight* | 330lb | 149.7kg |
05 Buckets Specification
| Bucket Capacities | 1.2-1.4 m3 (1.6-1.8 yd3) |
|---|
06 Hydraulic System Specification
| Hydraulic Cycle Time - Dump | 2.1 | |
|---|---|---|
| Hydraulic Cycle Time - Lift | 5.6 | |
| Main Relief | 3560 psi | |
| Hydraulic Cycle Time - Lower, Float | 3.2 | |
| Flow | 23.8 gal/min | |
| Lift Cylinder, Double Acting | 89 672 mm (3.5 26.5 in) | |
| Tilt Cylinder, Double Acting | 102 400 mm (4.0 15.8 in) |
07 Brakes Specification
| Brakes | Standards |
|---|
08 Operating Specifications Specification
| Breakout Force | 14007lb | 6353.5kg |
|---|---|---|
| Rated Bucket Capacity | 1.7yd3 | 1.3m3 |
| Tire Size | 17.5-25 | |
| Dump Height At Full Lift | 8.8ft in | 2.7m |
| Articulation | 40degrees | |
| Oscillation +/- | 11degrees | |
| Full Turn Static Tipping Load - Bucket | 11737lb | 5323.9kg |
09 Service Refill Capacities Specification
| Cooling System | 6.1gal | 23.1L |
|---|---|---|
| Fuel Tank | 39.6gal | 150L |
| Hydraulic Tank | 18.5gal | 70.1L |
| Hydraulic System | 26.4gal | 100L |
10 Cab Specification
| Rops | SAE J394, SAE J1040, ISO 3471 | |
|---|---|---|
| Fops | SAE J231, ISO 3449 | |
| Sound | 74 dB(A) |
11 Engine Dimensions Specification
| Bore | 4.2in | 105mm |
|---|---|---|
| Stroke | 5in | 127mm |
| Displacement | 268cu in | 4.4L |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.