Specification sheet Wheel Loader Ref caterpillar-914g-wheel-loader
Caterpillar 914G
The Caterpillar 914G is a wheel loader with an operating weight of 16,262 lb (7,378 kg), a 96 hp engine, and a 1.7 yd³ (1.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
16,262lb
7,378kg
Engine power
96hp
71.6kW
Net Power Bucket capacity
1.7yd³
1.3m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 914G sits above the median for its class:
- Operating weight 16,260 lb heavier than 69% (n=374)
- Engine power 96 hp more powerful than 76% (n=367)
- Bucket capacity 1.7 yd³ larger-bucket than 68% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3054 Turbocharged diesel | |
| Net Power | 96hp | 71.6kw |
| Gross Power | 100hp | 74.6kw |
| Power Measured @ | 2300rpm | |
| Displacement | 268.6cu in | 4.4L |
02 Operational Specification
| Operating Weight | 16262lb | 7378kg |
|---|---|---|
| Fuel Capacity | 39.6gal | 150L |
| Hydraulic System Fluid Capacity | 26.4gal | 100L |
| Engine Oil Fluid Capacity | 1.8gal | 7L |
| Cooling System Fluid Capacity | 5.8gal | 22L |
| Front Axle/Diff Fluid Capacity | 4gal | 15L |
| Rear Axle/Diff Fluid Capacity | 4gal | 15L |
| Static Tipping Weight | 11737lb | 5323kg |
| Turning Radius | 15.6ft in | 4748mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 17.5-R25,radial(L-2/L3 equivalent) |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 21.7mph | 35km/h |
| Max Speed - Reverse | 21.7mph | 35km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3560psi | 24550kPa |
|---|---|---|
| Pump Flow Capacity | 23.8gal/min | 90L/min |
| Raise Time | 5.6sec | |
| Dump Time | 2.1sec | |
| Lower Time | 3.2sec | |
| Pump Type | fixed displacement |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.75ft in | 2659mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.7yd3 | 1.3m3 |
| Bucket Capacity - Struck | 1.4yd3 | 1.11m3 |
| Bucket Width | 7.83ft in | 2401mm |
| Breakout Force | 14007lb | 62kN |
06 Dimensions Dimensions
| Ground Clearance | 1.5ft in | 456mm |
|---|---|---|
| Length With Bucket On Ground | 20.43ft in | 6229mm |
| Width Over Tires | 7.92ft in | 2434mm |
| Height To Top Of Cab | 10.17ft in | 3100mm |
| Wheelbase | 8.5ft in | 2600mm |
| Hinge Pin - Max Height | 11.25ft in | 3435mm |
| Reach At Max Lift And Dump | 3.17ft in | 973mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.