Specification sheet Wheel Loader Ref caterpillar-910e-wheel-loader
Caterpillar 910E
The Caterpillar 910E is a wheel loader with an operating weight of 15,979.11 lb (7,248 kg), a 75 hp engine, and a 1.31 yd³ (1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
15,979.11lb
7,248kg
Engine power
75hp
56kW
Net Power Bucket capacity
1.31yd³
1m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 910E sits above the median for its class:
- Operating weight 15,980 lb heavier than 68% (n=374)
- Engine power 75 hp more powerful than 56% (n=367)
- Bucket capacity 1.3 yd³ smaller-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3114 | |
| Net Power | 75hp | 56kw |
| Gross Power | 81hp | 60.5kw |
| Power Measured @ | 2400rpm | |
| Displacement | 268.6cu in | 4.4L |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 15979.2lb | 7248kg |
|---|---|---|
| Fuel Capacity | 25.7gal | 97L |
| Hydraulic System Fluid Capacity | 18.5gal | 70L |
| Engine Oil Fluid Capacity | 3gal | 11L |
| Cooling System Fluid Capacity | 8gal | 30L |
| Transmission Fluid Capacity | 6.1gal | 23L |
| Front Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Rear Axle/Diff Fluid Capacity | 4.8gal | 18L |
| Static Tipping Weight | 10491.8lb | 4759kg |
| Turning Radius | 15.8ft in | 4811.5mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 15.5x25 8 PR(L-2) |
03 Transmission Specification
| Transmission Type | powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.4mph | 36km/h |
| Max Speed - Reverse | 15mph | 24km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2204psi | 15196.1kPa |
|---|---|---|
| Pump Flow Capacity | 29.6gal/min | 112L/min |
| Raise Time | 5.3sec | |
| Dump Time | 1.3sec | |
| Lower Time | 3.2sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.46ft in | 2577mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.31yd3 | 1m3 |
| Bucket Capacity - Struck | 1.1yd3 | 0.84m3 |
| Bucket Width | 7.62ft in | 2320mm |
| Breakout Force | 16626lb | 73.96kN |
06 Dimensions Dimensions
| Ground Clearance | 1.13ft in | 343.4mm |
|---|---|---|
| Length With Bucket On Ground | 19.59ft in | 5970mm |
| Width Over Tires | 7.06ft in | 2150mm |
| Height To Top Of Cab | 9.83ft in | 2996mm |
| Wheelbase | 7.67ft in | 2337mm |
| Hinge Pin - Max Height | 11ft in | 3350mm |
| Reach At Max Lift And Dump | 3.31ft in | 1006mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.