Specification sheet Wheel Loader Ref caterpillar-910-wheel-loader
Caterpillar 910
The Caterpillar 910 is a wheel loader with an operating weight of 14,210 lb (6,445.55 kg), a 65 hp engine, and a 1.31 yd³ (1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
14,210lb
6,445.55kg
Engine power
65hp
48.5kW
Net Power Bucket capacity
1.31yd³
1m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 910 sits above the median for its class:
- Operating weight 14,210 lb heavier than 63% (n=374)
- Engine power 65 hp less powerful than 58% (n=367)
- Bucket capacity 1.3 yd³ smaller-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3204 | |
| Net Power | 65hp | 48.5kw |
| Power Measured @ | 2400rpm | |
| Displacement | 317.4cu in | 5.2L |
02 Operational Specification
| Operating Weight | 14210lb | 6445.6kg |
|---|---|---|
| Fuel Capacity | 29.9gal | 113L |
| Hydraulic System Fluid Capacity | 15.1gal | 57L |
| Engine Oil Fluid Capacity | 3gal | 11L |
| Cooling System Fluid Capacity | 6.7gal | 25L |
| Transmission Fluid Capacity | 6.1gal | 23L |
| Front Axle/Diff Fluid Capacity | 4gal | 15L |
| Rear Axle/Diff Fluid Capacity | 4gal | 15L |
| Static Tipping Weight | 9876.8lb | 4480kg |
| Turning Radius | 15.5ft in | 4720mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 15.5 x 25.8 PR |
03 Transmission Specification
| Transmission Type | Planetary power shift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 15mph | 24.2km/h |
| Max Speed - Reverse | 6.6mph | 10.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2500psi | 17236.9kPa |
|---|---|---|
| Raise Time | 6sec | |
| Dump Time | 1.3sec | |
| Lower Time | 3.5sec | |
| Pump Type | double section gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.01ft in | 2440mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.31yd3 | 1m3 |
| Bucket Width | 7.06ft in | 2150mm |
| Breakout Force | 9320lb | 41.46kN |
06 Dimensions Dimensions
| Ground Clearance | 1.25ft in | 381mm |
|---|---|---|
| Length With Bucket On Ground | 17.92ft in | 5460mm |
| Width Over Tires | 6.67ft in | 2030mm |
| Height To Top Of Cab | 9.91ft in | 3020mm |
| Wheelbase | 7.68ft in | 2340mm |
| Hinge Pin - Max Height | 10.14ft in | 3090mm |
| Reach At Max Lift And Dump | 2.83ft in | 860mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.