Specification sheet Wheel Loader Ref caterpillar-908h2-wheel-loader
Caterpillar 908H2
The Caterpillar 908H2 is a wheel loader with an operating weight of 14,253 lb (6,465.06 kg), a 69 hp engine, and a dig depth of 0.31 ft (93.98 mm).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
14,253lb
6,465.06kg
Engine power
69hp
51.5kW
Net Power Dig depth
0.31ft
93.98mm
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 908H2 sits above the median for its class:
- Operating weight 14,250 lb heavier than 63% (n=374)
- Engine power 69 hp less powerful than 53% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
01 Engine Specification
| Net Power | 69hp | 51.5kw |
|---|---|---|
| Displacement | 203cu in | 3.4L |
| Bore | 3.7in | 94mm |
| Stroke | 4.7in | 119.4mm |
| Maximum Gross Power - Sae J1995 | 74hp | 55.2kw |
| Maximum Net Power - Sae J1349 | 68hp | 50.8kw |
| Maximum Gross Power - Iso 14396 | 73hp | 54.5kw |
| Rated Net Power - 2,500 Rpm - Sae J1349 | 68hp | 50.8kw |
| Maximum Net Power - Iso 9249 | 69hp | 51.5kw |
| Gross Power - 2,500 Rpm - Sae J1995 | 74hp | 55.2kw |
| Net Power - 2,500 Rpm - Sae J1349 | 68hp | 50.8kw |
02 Operational Specification
| Operating Weight | 14253lb | 6465.1kg |
|---|
03 Transmission Specification
| Travel Speed 1 | 4.3mph | 7km/h |
|---|---|---|
| Travel Speed 2 | 12.4mph | 20km/h |
| High Speed | 21.7mph | 35km/h |
04 Buckets Specification
| Bucket Capacities | 0.9-1.5 m3 (1.2-2.0 yd3) |
|---|
05 Hydraulic System Specification
| Hydraulic Cycle Time - Dump | 2 Seconds | |
|---|---|---|
| Hydraulic Cycle Time - Lift | 5 Seconds | |
| Hydraulic Cycle Time - Rackback | 2.5 Seconds | |
| Main Relief | 3400 psi | |
| Hydraulic Cycle Time - Lower, Float | 4 Seconds | |
| 3rd Auxiliary Flow - Standard Flow | 22 gal/min | |
| 3rd Auxiliary Flow - High Flow | 33 gal/min |
06 Operating Specifications Specification
| Breakout Force | 10566lb | 4792.7kg |
|---|---|---|
| Rated Bucket Capacity | 1.4yd3 | 1.1m3 |
| Tire Size | 405/70 R20 | |
| Full Turn Static Tipping Load - Bucket | 7518lb | 3410.2kg |
| Rack Back - Transport Position | 52degrees | |
| Rated Operating Load At Full Turn - Bucket | 3759lb | 1705.1kg |
| Hydraulic Lift Capacity | 7868lb | 3568.9kg |
| Straight Tipping Load - Bucket | 10527lb | 4775kg |
| Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 500 Mm (20 In) Load Center, Transport 100 Mm (4 In) Above Ground) | 6592lb | 2990.1kg |
| Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 1.25 Stability And 500 Mm [20 In] Load Center) | 5192lb | 2355.1kg |
| Rated Operating Load At Full Turn - Forks (Sae J1197, Load Center At Tine Mid-Point, 1120 Mm [44 In] Tines) (50% Ftstl) | 3045lb | 1381.2kg |
| Rated Operating Load At Full Turn - Forks (Sae J1197, Load Center At Tine Mid-Point, 1220 Mm [48 In] Tines) (50% Ftstl) | 2919lb | 1324.1kg |
| Rated Operating Load Straight Back - Forks (Sae J1197, Load Center At Tine Mid-Point, 1120 Mm [44 In] Tines) (50% Ftstl) | 3907lb | 1772.2kg |
| Rated Operating Load Straight Back - Forks (Sae J1197, Load Center At Tine Mid-Point, 1220 Mm [48 In] Tines) (50% Ftstl) | 3822lb | 1733.7kg |
| Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 500 Mm [20 In] Load Center) (80% Of Ftstl) | 5192lb | 2355.1kg |
| Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 500 Mm [20 In] Load Center) (60% Of Ftstl) | 3893lb | 1765.9kg |
07 Service Refill Capacities Specification
| Cooling System | 6.3gal | 23.9L |
|---|---|---|
| Fuel Tank | 20.6gal | 78L |
| Hydraulic System | 25gal | 94.7L |
| Engine Oil | 2.6gal | 9.9L |
08 Cab Specification
| Rops | SAE J1040 MAY94, ISO 3471-1994 | |
|---|---|---|
| Fops | SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II |
09 Maximum Material Densities - General Purpose Specification
| Rated Capacity | 1.4yd3 | 1.1m3 |
|---|---|---|
| Dump Height | 100in | 2540mm |
| Maximum Material Density | 2611 lb/yd | |
| Bucket Width | 81in | 2057.4mm |
10 Maximum Material Densities - Light Material Specification
| Rated Capacity | 2yd3 | 1.6m3 |
|---|---|---|
| Dump Height | 92in | 2336.8mm |
| Maximum Material Density | 1743 lb/yd | |
| Bucket Width | 82in | 2082.8mm |
11 Maximum Material Densities - Multi Purpose Specification
| Rated Capacity | 1.2yd3 | 1m3 |
|---|---|---|
| Dump Height | 104in | 2641.6mm |
| Maximum Material Density | 3251 lb/yd | |
| Bucket Width | 81in | 2057.4mm |
12 Operator Environment Features - Canopy Specification
| Fixed Steering Column | Standard | |
|---|---|---|
| Vinyl Suspension Seat | Standard | |
| Coat Hook | Standard | |
| Sun Visor | Standard | |
| External Mirrors (2) - Knock Back | Standard | |
| Lockable Storage Box | Standard | |
| Adjustable Internal Mirror | Standard |
13 Operator Environment Features - Comfort Cab Specification
| Two Access Doors | Standard | |
|---|---|---|
| Adjustable Steering Column | Standard | |
| Cloth Suspension Seat, Arm Rest | Standard | |
| Left Window - Sliding | Standard | |
| Heated Rear Window | Standard | |
| Coat Hook | Standard | |
| Cabin Light | Standard | |
| Sun Visor | Standard | |
| Radio-Ready Kit (Wiring, Speaker, Antenna And Grilles) | Standard | |
| External Mirrors (2) - Knock Back | Standard | |
| Heater | Standard | |
| Lockable Storage Box | Standard | |
| Adjustable Internal Mirror | Standard | |
| Rear Blind | Optional | |
| Cat Radio/Cd/Mp3/Wma Player | Optional |
14 Operator Environment Features - Deluxe Cab Specification
| Two Access Doors | Standard | |
|---|---|---|
| Heated Rear Window | Standard | |
| Coat Hook | Standard | |
| Cabin Light | Standard | |
| Adjustable Steering Column | Standard | |
| Cloth Electric Air Suspension Seat, Arm/Head Rest, Lumbar Support, Heated Back Seat | Standard | |
| Left Window - Sliding | Standard | |
| Right Window - Sliding | Standard | |
| Air Conditioning | Standard | |
| Rear Blind | Optional | |
| Cat Radio/Cd/Mp3/Wma Player | Optional | |
| Sun Visor | Standard | |
| Radio-Ready Kit (Wiring, Speaker, Antenna And Grilles) | Standard | |
| External Mirrors (2) - Knock Back | Standard | |
| Heater | Standard | |
| Lockable Storage Box | Standard | |
| Adjustable Internal Mirror | Standard |
15 Dimensions Dimensions
| Ground Clearance | 1.09ft in | 330.2mm |
|---|---|---|
| Cab Height | 8.69ft in | 2648.72mm |
| Departure Angle - Degrees | 34degrees | |
| Dig Depth | 3.7in | 93.98mm |
| Dump Angle At Maximum Height - Degrees | 45degrees | |
| Fork Depth Below Ground | 1.2in | 30.48mm |
| Fork Height At Maximum Reach | 5ft in | 1.53m |
| Fork Reach At Maximum Height | 1.95ft in | 0.6m |
| Hinge Pin At Maximum Height | 11.19ft in | 3.42m |
| Load Over Height | 10.55ft in | 3.22m |
| Machine Width | 6.51ft in | 1.99m |
| Maximum Dump Height | 8.33ft in | 2.54m |
| Maximum Fork Height | 10.83ft in | 3.31m |
| Maximum Reach | 4.74ft in | 1.45m |
| Overall Length - With Bucket | 18.9ft in | 5.77m |
| Overall Length - With Forks | 20.18ft in | 6.16m |
| Reach At Ground Level | 3ft in | 0.92m |
| Reach At Maximum Dump Height | 2.81ft in | 0.86m |
| Tire Gauge | 5.15ft in | 1.57m |
| Turning Radius - Inside Tire | 6.82ft in | 2.08m |
| Turning Radius - Over Bucket | 15ft in | 4.58m |
| Wheel Base | 7.12ft in | 2.18m |
| Articulation Angle - Degrees | 39degrees | |
| Width - Over Bucket | 6.76ft in | 2.07m |
?Questions & answersfrom this machine's data
- How much does a Caterpillar 908H2 wheel loader weigh?
- A Caterpillar 908H2 wheel loader has an operating weight of 14,253 lb (6,465.1 kg).
- What engine does a Caterpillar 908H2 wheel loader have?
- A Caterpillar 908H2 wheel loader is powered by an engine producing 69 hp (51.5 kW).
- What is the ground clearance of a Caterpillar 908H2 wheel loader?
- A Caterpillar 908H2 wheel loader has a ground clearance of 1.1 ft (330.2 mm).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.