Specification sheet Wheel Loader Ref caterpillar-907h-wheel-loader
Caterpillar 907H
The Caterpillar 907H is a wheel loader with an operating weight of 12,809 lb (5,810.07 kg), and a 70 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
12,809lb
5,810.07kg
Engine power
70hp
52.2kW
Net Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Caterpillar 907H sits in the middle of its class:
- Operating weight 12,810 lb heavier than 53% (n=374)
- Engine power 70 hp less powerful than 52% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
01 Engine Specification
| Net Power | 70hp | 52.2kw |
|---|---|---|
| Gross Power | 74hp | 55.2kw |
02 Operational Specification
| Operating Weight | 12809lb | 5810.1kg |
|---|
03 Transmission Specification
| Travel Speed 1 | 4.3mph | 7km/h |
|---|---|---|
| Travel Speed 2 | 12.4mph | 20km/h |
| High Speed | 21.7mph | 35km/h |
04 Weights Specification
| Operating Weight | 12809lb | 5810.1kg |
|---|
05 Buckets Specification
| Bucket Capacities | 0.75 - 1.2 m3 (0.98 - 1.6 yd3) |
|---|
06 Hydraulic System Specification
| Hydraulic Cycle Time - Dump | 2 Seconds | |
|---|---|---|
| Hydraulic Cycle Time - Lift | 5 Seconds | |
| Hydraulic Cycle Time - Rackback | 2.5 Seconds | |
| Main Relief | 3400 psi | |
| Hydraulic Cycle Time - Lower, Float | 4 Seconds | |
| 3rd Auxiliary Flow - High Flow | 33 gal/min | |
| 3rd Auxiliary Flow - Standard | 22 gal/min |
07 Operating Specifications Specification
| Breakout Force | 9442lb | 4282.9kg |
|---|---|---|
| Rated Bucket Capacity | 1.3yd3 | 1m3 |
| Full Turn Static Tipping Load - Bucket | 6989lb | 3170.2kg |
| Rack Back - Transport Position | 52degrees | |
| Hydraulic Lift Capacity | 7194lb | 3263.2kg |
| Straight Tipping Load - Bucket | 9524lb | 4320.1kg |
| Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 500 Mm (20 In) Load Center, Transport 100 Mm (4 In) Above Ground) | 6140lb | 2785.1kg |
| Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 500 Mm (20 In) Load Center) (80% Of Ftstl) | 4674lb | 2120.1kg |
| Rated Operating Load At Full Turn - Forks (En 474-3:2006, Rough Terrain, 500 Mm (20 In) Load Center) (60% Of Ftstl) | 3505lb | 1589.9kg |
| Rated Operating Load At Full Turn | 3494lb | 1584.9kg |
08 Service Refill Capacities Specification
| Cooling System | 6.3gal | 23.9L |
|---|---|---|
| Fuel Tank | 20.6gal | 78L |
| Hydraulic System | 22.2gal | 84.1L |
| Engine Oil | 2.6gal | 9.9L |
09 Cab Specification
| Rops | SAE J1040 MAY94, ISO 3471-1994 | |
|---|---|---|
| Fops | SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II |
10 Engine Dimensions Specification
| Bore | 3.7in | 94mm |
|---|---|---|
| Stroke | 4.7in | 119.4mm |
| Displacement | 203cu in | 3.4L |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.