Specification sheet Mini Excavator Ref caterpillar-302-5c-mini-excavator

Caterpillar 302.5C

The Caterpillar 302.5C is a mini excavator with an operating weight of 6,283 lb, a 24.9 hp engine, and a dig depth of 8.67 ft.

✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →
Operating weight
6,283lb
 
Engine power
24.9hp
 
Net Power
Dig depth
8.67ft
 

◆Where it sits in its classpercentile · mini excavators

Among 479 mini excavators , the Caterpillar 302.5C sits in the middle of its class:

  • Operating weight 6,280 lb lighter than 53% (n=438)
  • Engine power 25 hp more powerful than 55% (n=448)
  • Dig depth 8.7 ft shallower-digging than 55% (n=426)

01 Boom/Stick Option (Hex) 1 Specification

Shipping Length Of Unit 14.83ft in 4,520mm‖ — metric converted from the published imperial value
Max Cutting Height 14.25ft in 4,343mm‖ — metric converted from the published imperial value
Shipping Height Of Unit 7.5ft in 2,286mm‖ — metric converted from the published imperial value
Max Loading Height 10.17ft in 3,100mm‖ — metric converted from the published imperial value
Max Reach Along Ground 14.92ft in 4,548mm‖ — metric converted from the published imperial value
Max Vertical Wall Digging Depth 6.25ft in 1,905mm‖ — metric converted from the published imperial value
Max Digging Depth 8.67ft in 2,643mm‖ — metric converted from the published imperial value
Boom/Stick Option (Hex) 1 Standard Stick

02 Boom/Stick Option (Hex) 2 Specification

Max Cutting Height 14.83ft in 4,520mm‖ — metric converted from the published imperial value
Shipping Length Of Unit 14.83ft in 4,520mm‖ — metric converted from the published imperial value
Max Loading Height 10.75ft in 3,277mm‖ — metric converted from the published imperial value
Shipping Height Of Unit 7.5ft in 2,286mm‖ — metric converted from the published imperial value
Max Reach Along Ground 15.75ft in 4,801mm‖ — metric converted from the published imperial value
Max Vertical Wall Digging Depth 7.17ft in 2,185mm‖ — metric converted from the published imperial value
Max Digging Depth 9.58ft in 2,920mm‖ — metric converted from the published imperial value
Boom/Stick Option (Hex) 2 Long Stick

03 Dimensions Specification

Width To Outside Of Tracks 4.75ft in 1,448mm‖ — metric converted from the published imperial value
Length Of Track On Ground 6.33ft in 1,929mm‖ — metric converted from the published imperial value
Ground Clearance 0.87ft in 265mm‖ — metric converted from the published imperial value
Height To Top Of Cab 7.5ft in 2,286mm‖ — metric converted from the published imperial value
Tail Swing Radius 4.17ft in 1,271mm‖ — metric converted from the published imperial value
Track Gauge 3.77ft in 1,149mm‖ — metric converted from the published imperial value
Maximum Dump Height - Long Stick 10.76ft in 3,280mm‖ — metric converted from the published imperial value
Maximum Dump Height - Standard Stick 10.2ft in 3,109mm‖ — metric converted from the published imperial value
Maximum Horizontal Reach - Long Stick 10.76ft in 3,280mm‖ — metric converted from the published imperial value
Maximum Horizontal Reach - Standard Stick 10.2ft in 3,109mm‖ — metric converted from the published imperial value
Maximum Reach - Ground Level - Standard Stick 14.91ft in 4,545mm‖ — metric converted from the published imperial value
Maximum Vertical Dig Depth - Standard Stick 6.3ft in 1,920mm‖ — metric converted from the published imperial value
Removal Counterweight Clearance 1.75ft in 533mm‖ — metric converted from the published imperial value
Shipping Height 7.55ft in 2,301mm‖ — metric converted from the published imperial value
Maximum Cutting Height - Long Stick 14.86ft in 4,529mm‖ — metric converted from the published imperial value
Length - Center Of Rollers 14.91ft 4,545mm‖ — metric converted from the published imperial value
Shipping Length 14.8ft in 4,511mm‖ — metric converted from the published imperial value
Height - Over Cab 7.55ft in 2,301mm‖ — metric converted from the published imperial value
Swing Radius - Rear 4.2ft in 1,280mm‖ — metric converted from the published imperial value
Maximum Cutting Height - Standard Stick 14.29ft in 4,356mm‖ — metric converted from the published imperial value
Maximum Digging Depth - Long Stick 16.18ft in 4,932mm‖ — metric converted from the published imperial value
Maximum Digging Depth - Standard Stick 8.66ft in 2,640mm‖ — metric converted from the published imperial value
Track Shoe Width 0.98ft in 299mm‖ — metric converted from the published imperial value
Transport Width 4.76ft in 1,451mm‖ — metric converted from the published imperial value
Width - Over Track 4.76ft in 1,451mm‖ — metric converted from the published imperial value

04 Undercarriage Specification

Shoe Size 12in 305mm‖ — metric converted from the published imperial value
Track Gauge 3.75ft in 1,143mm‖ — metric converted from the published imperial value
Max Travel Speed 3.1mph 5km/h‖ — metric converted from the published imperial value

05 Swing System Specification

Swing System Type Hydraulic motor-driven
Machine Swing Speed 9.5rpm
Boom Swing - Left - Without Stop 90degrees
Boom Swing - Left - With Stop 54degrees
Boom Swing - Right 48degrees

06 Engine Specification

Number Of Cylinders 3
Engine Make 2251
Engine Model S3L2
Gross Power 26.7hp 19.9kw‖ — metric converted from the published imperial value
Net Power 24.9hp 18.6kw‖ — metric converted from the published imperial value
Power Measured @ 2300rpm
Displacement 80.4cu in 1,318cm3‖ — metric converted from the published imperial value
Engine Model Mitsubishi S3L2 NA Diesel

07 Operational Specification

Operating Weight 6283lb 2,850kg‖ — metric converted from the published imperial value
Fuel Capacity 10gal 38l‖ — metric converted from the published imperial value
Cooling System Fluid Capacity 1.2gal 4.5l‖ — metric converted from the published imperial value
Hydraulic System Fluid Capacity 13.2gal 50l‖ — metric converted from the published imperial value
Engine Oil Capacity 1.7gal 6.4l‖ — metric converted from the published imperial value
Operating Voltage 12V
Alternator Supplied Amperage 50amps
Hydraulic System Relief Valve Pressure 3205psi 22,098kpa‖ — metric converted from the published imperial value
Hydraulic Pump Flow Capacity 8.2gal/min 31l/min‖ — metric converted from the published imperial value

08 Swing Mechanism Specification

Swing Speed 9.5rpm

09 Weights Specification

Operating Weight 6052lb 2,745kg‖ — metric converted from the published imperial value
Operating Weight - With Cab 6283lb 2,850kg‖ — metric converted from the published imperial value

10 Buckets Specification

Reference Bucket Capacity 0.1yd3
Minimum Bucket Capacity 0.1yd3
Maximum Bucket Capacity 0.2yd3

11 Blade Specification

Height 12.6in 320mm‖ — metric converted from the published imperial value
Width 4.8ft in 1,463mm‖ — metric converted from the published imperial value
Lift Height 11.2in 284mm‖ — metric converted from the published imperial value
Dig Depth 16.5in 419mm‖ — metric converted from the published imperial value

12 Hydraulic System Specification

Operating Pressure - Swing 2524psi 17,402kpa‖ — metric converted from the published imperial value
Operating Pressure - Equipment 3205psi 22,098kpa‖ — metric converted from the published imperial value
Operating Pressure - Travel 3205psi 22,098kpa‖ — metric converted from the published imperial value
Digging Force - Stick - Standard 3439.6lb 1,560.2kg‖ — metric converted from the published imperial value
Digging Force - Stick - Long 2945lb 1,336kg‖ — metric converted from the published imperial value
Digging Force - Bucket 5440.4lb 2,467.7kg‖ — metric converted from the published imperial value
Auxiliary Circuits - Primary - At 174 Bar 16.9gal/min 64l/min‖ — metric converted from the published imperial value
Auxiliary Circuits - Secondary - At 174 Bar 3.8gal/min 14l/min‖ — metric converted from the published imperial value
Pump - Piston (Tandem) 8.2gal/min 31l/min‖ — metric converted from the published imperial value
Pump - Gear (Dual) (Swing, Pilot) 4.9gal/min 19l/min‖ — metric converted from the published imperial value

13 Service Refill Capacities Specification

Cooling System 1.2gal 4.5l‖ — metric converted from the published imperial value
Fuel Tank 10gal 38l‖ — metric converted from the published imperial value
Hydraulic Tank 9.5gal 36l‖ — metric converted from the published imperial value
Hydraulic System 13.2gal 50l‖ — metric converted from the published imperial value
Engine Oil 1.7gal 6.4l‖ — metric converted from the published imperial value

14 Engine Dimensions Specification

Bore 3.1in 79mm‖ — metric converted from the published imperial value
Stroke 3.6in 91mm‖ — metric converted from the published imperial value
Displacement 80.4cu in 1,318cm3‖ — metric converted from the published imperial value

15 Sound Levels Specification

Cab 81 dB(A)
Canopy 81 dB(A)

16 Msc Comments Specification

Msc Spec Date 8/05

17 Travel System Specification

Maximum Traction Force - High Speed 2788lb 1,265kg‖ — metric converted from the published imperial value
Maximum Traction Force - Low Speed 5305lb 2,406kg‖ — metric converted from the published imperial value
Gradeability - Maximum - High 30degrees
Travel Speed - High 3.1mph 5km/h‖ — metric converted from the published imperial value
Travel Speed - Low 1.6mph 2.6km/h‖ — metric converted from the published imperial value

Data notes

‖

Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.

Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.