Specification sheet Mini Excavator Ref caterpillar-302-5-mini-excavator

Caterpillar 302.5

The Caterpillar 302.5 is a mini excavator with an operating weight of 6,027.5 lb, a 24.1 hp engine, and a dig depth of 8.7 ft.

✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →
Operating weight
6,027.5lb
 
Engine power
24.1hp
 
Gross Power
Dig depth
8.7ft
 

◆Where it sits in its classpercentile · mini excavators

Among 479 mini excavators , the Caterpillar 302.5 sits in the middle of its class:

  • Operating weight 6,030 lb lighter than 58% (n=438)
  • Engine power 24 hp more powerful than 52% (n=448)
  • Dig depth 8.7 ft shallower-digging than 54% (n=426)

01 Boom/Stick Option (Hex) 1 Specification

Max Cutting Height 14.38ft in 4,383mm‖ — metric converted from the published imperial value
Max Loading Height 10.18ft in 3,103mm‖ — metric converted from the published imperial value
Max Reach Along Ground 14.97ft in 4,563mm‖ — metric converted from the published imperial value
Max Vertical Wall Digging Depth 6.96ft in 2,121mm‖ — metric converted from the published imperial value
Max Digging Depth 8.7ft in 2,652mm‖ — metric converted from the published imperial value
Boom/Stick Option (Hex) 1 boom w/ stick 1110mm

02 Boom/Stick Option (Hex) 2 Specification

Max Cutting Height 14.83ft in 4,520mm‖ — metric converted from the published imperial value
Max Loading Height 10.67ft in 3,252mm‖ — metric converted from the published imperial value
Max Reach Along Ground 16.18ft in 4,932mm‖ — metric converted from the published imperial value
Max Vertical Wall Digging Depth 7.81ft in 2,380mm‖ — metric converted from the published imperial value
Max Digging Depth 9.68ft in 2,950mm‖ — metric converted from the published imperial value
Boom/Stick Option (Hex) 2 boom w/ stick 1410mm

03 Dimensions Specification

Width To Outside Of Tracks 3.75ft in 1,143mm‖ — metric converted from the published imperial value
Length Of Track On Ground 4.83ft in 1,472mm‖ — metric converted from the published imperial value
Ground Clearance 1.02ft in 311mm‖ — metric converted from the published imperial value
Height To Top Of Cab 7.55ft in 2,301mm‖ — metric converted from the published imperial value
Tail Swing Radius 4.2ft in 1,280mm‖ — metric converted from the published imperial value
Track Gauge 3.75ft in 1,143mm‖ — metric converted from the published imperial value
Center Ground Clearance 1ft in 305mm‖ — metric converted from the published imperial value
Height - Over Canopy 7.58ft in 2,310mm‖ — metric converted from the published imperial value
Maximum Cutting Height - Long Stick 14.83ft in 4,520mm‖ — metric converted from the published imperial value
Maximum Cutting Height - Standard Stick 14.33ft in 4,368mm‖ — metric converted from the published imperial value
Maximum Digging Depth - Long Stick 9.67ft in 2,947mm‖ — metric converted from the published imperial value
Maximum Digging Depth - Standard Stick 8.67ft in 2,643mm‖ — metric converted from the published imperial value
Maximum Dump Height - Long Stick 10.67ft in 3,252mm‖ — metric converted from the published imperial value
Maximum Dump Height - Standard Stick 10.17ft in 3,100mm‖ — metric converted from the published imperial value
Maximum Horizontal Reach - Long Stick 16.18ft in 4,932mm‖ — metric converted from the published imperial value
Maximum Horizontal Reach - Standard Stick 15.33ft in 4,673mm‖ — metric converted from the published imperial value
Maximum Reach - Ground Level - Long Stick 15.83ft in 4,825mm‖ — metric converted from the published imperial value
Maximum Reach - Ground Level - Standard Stick 15ft in 4,572mm‖ — metric converted from the published imperial value
Maximum Vertical Dig Depth - Long Stick 7.83ft in 2,387mm‖ — metric converted from the published imperial value
Maximum Vertical Dig Depth - Standard Stick 7ft in 2,134mm‖ — metric converted from the published imperial value
Removal Counterweight Clearance 1.84ft in 561mm‖ — metric converted from the published imperial value
Shipping Length 14.83ft in 4,520mm‖ — metric converted from the published imperial value
Height - Over Cab 7.58ft in 2,310mm‖ — metric converted from the published imperial value
Track Shoe Width 12ft in 3,658mm‖ — metric converted from the published imperial value
Width - Over Track 4.75ft in 1,448mm‖ — metric converted from the published imperial value
Width - Upper Structure 4.5ft in 1,372mm‖ — metric converted from the published imperial value
Stick Length - Long Stick 4.67ft in 1,423mm‖ — metric converted from the published imperial value
Stick Length - Standard Stick 3.67ft in 1,119mm‖ — metric converted from the published imperial value
Swing Radius - Rear 4.17ft in 1,271mm‖ — metric converted from the published imperial value

04 Undercarriage Specification

Shoe Size 11.82in 300.2mm‖ — metric converted from the published imperial value
Track Gauge 3.78ft in 1,152mm‖ — metric converted from the published imperial value
Max Travel Speed 2.8mph 4.5km/h‖ — metric converted from the published imperial value
Drawbar Pull 4950lb 2,245kg‖ — metric converted from the published imperial value

05 Electrical System Specification

Electrical System Type Twelve-volt system

06 Swing System Specification

Swing System Type Hydraulic Motor Driven
Machine Swing Speed 9rpm
Boom Swing - Left - Without Stop 90degrees
Boom Swing - Left - With Stop 55degrees
Boom Swing - Right 50degrees

07 Engine Specification

Engine Model 3013
Gross Power 24.1hp 18kw‖ — metric converted from the published imperial value
Displacement 91.3cu in 1,496cm3‖ — metric converted from the published imperial value
Engine Model 3013

08 Operational Specification

Operating Weight 6027.5lb 2,734kg‖ — metric converted from the published imperial value
Fuel Capacity 11gal 42l‖ — metric converted from the published imperial value
Hydraulic System Fluid Capacity 13.3gal 50.3l‖ — metric converted from the published imperial value
Hydraulic System Relief Valve Pressure 2987psi 20,595kpa‖ — metric converted from the published imperial value

09 Weights Specification

Operating Weight 5762lb 2,614kg‖ — metric converted from the published imperial value
Operating Weight - With Cab 6015lb 2,728kg‖ — metric converted from the published imperial value

10 Blade Specification

Height 14in 356mm‖ — metric converted from the published imperial value
Width 4.8ft in 1,463mm‖ — metric converted from the published imperial value
Lift Height 13in 330mm‖ — metric converted from the published imperial value
Dig Depth 11in 279mm‖ — metric converted from the published imperial value

11 Hydraulic System Specification

Operating Pressure - Swing 2494psi 17,196kpa‖ — metric converted from the published imperial value
Pump - Gear (Single) 4.9gal/min 19l/min‖ — metric converted from the published imperial value
Pump - Gear (Tandem) 8.8gal/min 33l/min‖ — metric converted from the published imperial value
Operating Pressure - Equipment 2987psi 20,595kpa‖ — metric converted from the published imperial value
Operating Pressure - Travel 2987psi 20,595kpa‖ — metric converted from the published imperial value
Digging Force - Stick - Standard 3124lb 1,417kg‖ — metric converted from the published imperial value
Digging Force - Stick - Long 2665lb 1,209kg‖ — metric converted from the published imperial value
Digging Force - Bucket 4928lb 2,235kg‖ — metric converted from the published imperial value
Auxiliary Circuit - Primary (245 Bar/3,553 Psi) 13.5gal/min 51.1l/min‖ — metric converted from the published imperial value

12 Service Refill Capacities Specification

Fuel Tank 10.8gal 40.9l‖ — metric converted from the published imperial value
Hydraulic Tank 9.4gal 36l‖ — metric converted from the published imperial value
Hydraulic System 13gal 49l‖ — metric converted from the published imperial value
Engine Oil 1.5gal 5.7l‖ — metric converted from the published imperial value
Cooling System Tag 1.1gal 4.2l‖ — metric converted from the published imperial value

13 Engine Dimensions Specification

Bore 3in 76mm‖ — metric converted from the published imperial value
Stroke 4in 102mm‖ — metric converted from the published imperial value
Displacement 91.3cu in 1,496cm3‖ — metric converted from the published imperial value

14 Msc Comments Specification

Msc Spec Date 1/1/2000

15 Travel System Specification

Maximum Traction Force - High Speed 2475lb 1,123kg‖ — metric converted from the published imperial value
Maximum Traction Force - Low Speed 4950lb 2,245kg‖ — metric converted from the published imperial value
Gradeability - Maximum - High 31degrees
Travel Speed - High 2.8mph 4.5km/h‖ — metric converted from the published imperial value
Travel Speed - Low 1.6mph 2.6km/h‖ — metric converted from the published imperial value
Gradeability - Maximum - Low 37degrees

Data notes

‖

Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.

Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.