Specification sheet Mini Excavator Ref caterpillar-301-7d-cr-mini-excavator

Caterpillar 301.7D CR

The Caterpillar 301.7D CR is a mini excavator with an operating weight of 3,726 lb, a 17.7 hp engine, and a dig depth of 8.14 ft.

✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →
Operating weight
3,726lb
 
Engine power
17.7hp
 
Net Power
Dig depth
8.14ft
 

◆Where it sits in its classpercentile · mini excavators

Among 479 mini excavators , the Caterpillar 301.7D CR sits below the median for its class:

  • Operating weight 3,730 lb lighter than 81% (n=438)
  • Engine power 18 hp less powerful than 75% (n=448)
  • Dig depth 8.1 ft shallower-digging than 66% (n=426)

01 Dimensions (Approximate) - Long Stick Specification

Boom Swing Angle - Lh 65degrees
Maximum Dozer Lift Height 11in 279mm‖ — metric converted from the published imperial value
Maximum Boom Offset - Rh 1.75ft in 533mm‖ — metric converted from the published imperial value
Maximum Dump Height 8.39ft in 2,557mm‖ — metric converted from the published imperial value
Length - Undercarriage - Extending 5.27ft in 1,606mm‖ — metric converted from the published imperial value
Maximum Reach - Ground Level 13.11ft in 3,996mm‖ — metric converted from the published imperial value
Maximum Dig Height 11.64ft in 3,548mm‖ — metric converted from the published imperial value
Maximum Vertical Dig Depth 5.64ft in 1,719mm‖ — metric converted from the published imperial value
Height 7.75ft in 2,362mm‖ — metric converted from the published imperial value
Transport Length - Arm Lowered 11.76ft in 3,584mm‖ — metric converted from the published imperial value
Maximum Digging Depth 8.14ft in 2,481mm‖ — metric converted from the published imperial value
Undercarriage Width - Extended 4.27ft in 1,301mm‖ — metric converted from the published imperial value
Maximum Boom Offset - Lh 1.37ft in 418mm‖ — metric converted from the published imperial value
Undercarriage Width - Retracted 3.25ft in 991mm‖ — metric converted from the published imperial value
Maximum Dozer Dig Depth 1.28ft in 390mm‖ — metric converted from the published imperial value
Width 2.4ft in 732mm‖ — metric converted from the published imperial value

02 Dimensions (Approximate) - Standard Stick Specification

Maximum Dozer Lift Height 11in 279mm‖ — metric converted from the published imperial value
Height 7.75ft in 2,362mm‖ — metric converted from the published imperial value
Length - Undercarriage - Extending 5.27ft in 1,606mm‖ — metric converted from the published imperial value
Maximum Boom Offset - Lh 1.37ft in 418mm‖ — metric converted from the published imperial value
Maximum Boom Offset - Rh 1.75ft in 533mm‖ — metric converted from the published imperial value
Maximum Dig Height 11.27ft in 3,435mm‖ — metric converted from the published imperial value
Maximum Digging Depth 7.61ft in 2,320mm‖ — metric converted from the published imperial value
Maximum Dozer Dig Depth 1.28ft in 390mm‖ — metric converted from the published imperial value
Boom Swing Angle - Lh 65degrees
Maximum Dump Height 8ft in 2,438mm‖ — metric converted from the published imperial value
Maximum Reach - Ground Level 12.6ft in 3,840mm‖ — metric converted from the published imperial value
Maximum Vertical Dig Depth 5.18ft in 1,579mm‖ — metric converted from the published imperial value
Transport Length - Arm Lowered 11.76ft in 3,584mm‖ — metric converted from the published imperial value
Undercarriage Width - Extended 4.27ft in 1,301mm‖ — metric converted from the published imperial value
Undercarriage Width - Retracted 3.25ft in 991mm‖ — metric converted from the published imperial value
Width 2.4ft in 732mm‖ — metric converted from the published imperial value

03 Engine Specification

Net Power 17.7hp 13.2kw‖ — metric converted from the published imperial value
Displacement 68.1cu in 1,116cm3‖ — metric converted from the published imperial value
Engine Model Yanmar 3TNV76
Gross Power - Iso 14396 24.3hp 18.1kw‖ — metric converted from the published imperial value
Rated Net Power - 2,200 Rpm - Iso 9249 17.7hp 13.2kw‖ — metric converted from the published imperial value

04 Operational Specification

Operating Weight 3726lb 1,690kg‖ — metric converted from the published imperial value

05 Weights Specification

Operating Weight - With Canopy 3726lb 1,690kg‖ — metric converted from the published imperial value
Transport Weight - With Canopy 3550lb 1,610kg‖ — metric converted from the published imperial value

06 Blade Specification

Height 9in 229mm‖ — metric converted from the published imperial value
Lift Height 11in 279mm‖ — metric converted from the published imperial value
Dig Depth 15in 381mm‖ — metric converted from the published imperial value

07 Hydraulic System Specification

Operating Pressure - Swing 2610psi 17,995kpa‖ — metric converted from the published imperial value
Operating Pressure - Equipment 3481psi 24,001kpa‖ — metric converted from the published imperial value
Operating Pressure - Travel 3481psi 24,001kpa‖ — metric converted from the published imperial value
Pump Flow At 2,200 Rpm 10.5gal/min 39.7l/min‖ — metric converted from the published imperial value
Maximum Bucket Force 3190lb 1,447kg‖ — metric converted from the published imperial value
Maximum Stick Force - Standard Stick 1890lb 857.3kg‖ — metric converted from the published imperial value
Maximum Stick Force - Long Stick 1640lb 743.9kg‖ — metric converted from the published imperial value
Auxiliary Circuits - Primary And Secondary - Maximum Flow 9gal/min 34l/min‖ — metric converted from the published imperial value
Auxiliary Circuits - Primary And Secondary - Maximum Pressure 3335psi 22,994kpa‖ — metric converted from the published imperial value

08 Operating Specifications Specification

Stick Length - Standard 37.1in 942mm‖ — metric converted from the published imperial value
Stick Length - Long 43.2in 1,097mm‖ — metric converted from the published imperial value
Counterweight 110lb 49.9kg‖ — metric converted from the published imperial value

09 Service Refill Capacities Specification

Fuel Tank Capacity 5gal 19l‖ — metric converted from the published imperial value
Hydraulic Tank Capacity 5.3gal 20l‖ — metric converted from the published imperial value

10 Travel System Specification

Gradeability 30degrees/58%
Travel Speed 2.8 km/h-5.6 km/h (1.74 mph-3.48 mph)

Data notes

‖

Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.

Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.