Specification sheet Mini Excavator Ref caterpillar-301-7-cr-mini-excavator

Caterpillar 301.7 CR

The Caterpillar 301.7 CR is a mini excavator with an operating weight of 4,045 lb, a 19.2 hp engine, and a dig depth of 8.33 ft.

✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →
Operating weight
4,045lb
 
Engine power
19.2hp
 
Net Power
Dig depth
8.33ft
 

◆Where it sits in its classpercentile · mini excavators

Among 479 mini excavators , the Caterpillar 301.7 CR sits below the median for its class:

  • Operating weight 4,050 lb lighter than 74% (n=438)
  • Engine power 19 hp less powerful than 68% (n=448)
  • Dig depth 8.3 ft shallower-digging than 62% (n=426)

01 Dimensions - Long Stick Specification

Swing Bearing - Height 17.4in 442mm‖ — metric converted from the published imperial value
Note *Overall Shipping Length depends on blade position during shipment.
Boom Height - Shipping Position 40.9in 1,039mm‖ — metric converted from the published imperial value
Boom In Reach 63.8in 1,621mm‖ — metric converted from the published imperial value
Boom Swing - Left 65in 1,651mm‖ — metric converted from the published imperial value
Boom Swing - Right 50in 1,270mm‖ — metric converted from the published imperial value
Dig Depth 100in 2,540mm‖ — metric converted from the published imperial value
Maximum Blade Depth 10.4in 264mm‖ — metric converted from the published imperial value
Maximum Blade Height 10.6in 269mm‖ — metric converted from the published imperial value
Maximum Dig Height 137.4in 3,490mm‖ — metric converted from the published imperial value
Maximum Dump Clearance 98.8in 2,510mm‖ — metric converted from the published imperial value
Maximum Reach 162.6in 4,130mm‖ — metric converted from the published imperial value
Maximum Reach - Ground Level 159.81in 4,059.2mm‖ — metric converted from the published imperial value
Minimum Ground Clearance Below Undercarriage 5.9in 150mm‖ — metric converted from the published imperial value
O/A Shipping Height 90.6in 2,301mm‖ — metric converted from the published imperial value
O/A Undercarriage Length 62.6in 1,590mm‖ — metric converted from the published imperial value
Stick Length 45.7in 1,161mm‖ — metric converted from the published imperial value
Tail Swing 25.6in 650mm‖ — metric converted from the published imperial value
Track Belt/Shoe Width 9.1in 231mm‖ — metric converted from the published imperial value
Track Width - Expanded 51.18in 1,300mm‖ — metric converted from the published imperial value
Track Width - Retracted 39in 991mm‖ — metric converted from the published imperial value
Vertical Wall 74.41in 1,890mm‖ — metric converted from the published imperial value

02 Dimensions - Standard Stick Specification

Maximum Reach - Ground Level 153.5in 3,899mm‖ — metric converted from the published imperial value
Tail Swing 25.6in 650mm‖ — metric converted from the published imperial value
Minimum Ground Clearance Below Undercarriage 5.9in 150mm‖ — metric converted from the published imperial value
Boom Height - Shipping Position 42.9in 1,090mm‖ — metric converted from the published imperial value
Vertical Wall 70.91in 1,801mm‖ — metric converted from the published imperial value
Boom In Reach 64.2in 1,631mm‖ — metric converted from the published imperial value
O/A Shipping Height 90.6in 2,301mm‖ — metric converted from the published imperial value
Track Width - Retracted 39in 991mm‖ — metric converted from the published imperial value
Boom Swing - Left 65in 1,651mm‖ — metric converted from the published imperial value
Track Belt/Shoe Width 9.1in 231mm‖ — metric converted from the published imperial value
Boom Swing - Right 50in 1,270mm‖ — metric converted from the published imperial value
Dig Depth 92.5in 2,350mm‖ — metric converted from the published imperial value
O/A Undercarriage Length 62.6in 1,590mm‖ — metric converted from the published imperial value
Maximum Blade Depth 10.4in 264mm‖ — metric converted from the published imperial value
Overall Shipping Length* 142.5in 3,620mm‖ — metric converted from the published imperial value
Maximum Blade Height 10.6in 269mm‖ — metric converted from the published imperial value
Stick Length 37.8in 960mm‖ — metric converted from the published imperial value
Maximum Dig Height 135in 3,429mm‖ — metric converted from the published imperial value
Track Width - Expanded 51.18in 1,300mm‖ — metric converted from the published imperial value
Maximum Dump Clearance 96.5in 2,451mm‖ — metric converted from the published imperial value
Swing Bearing - Height 17.4in 442mm‖ — metric converted from the published imperial value
Note *Overall Shipping Length depends on blade position during shipment.
Maximum Reach 156.31in 3,970.3mm‖ — metric converted from the published imperial value

03 Swing System Specification

Machine Swing Speed 9.8rpm

04 Engine Specification

Net Power 19.2hp 14.3kw‖ — metric converted from the published imperial value
Displacement 69cu in 1,131cm3‖ — metric converted from the published imperial value
Bore 3in 76mm‖ — metric converted from the published imperial value
Stroke 3.2in 81mm‖ — metric converted from the published imperial value
Engine Model C1.1
Gross Power - Iso 14396 21.6hp 16.1kw‖ — metric converted from the published imperial value
Rated Net Power - 2,400 Rpm - Iso 9249/Eec 80/1269 19.2hp 14.3kw‖ — metric converted from the published imperial value

05 Weights Specification

Operating Weight 4045lb 1,835kg‖ — metric converted from the published imperial value
Note (1) *Minimum Weight is based on rubber tracks, canopy, operator, expandable undercarriage and full fuel tank.
Note (2) **Maximum Weight is based on steel tracks, canopy, operator, expandable undercarriage and full fuel tank.
Minimum Operating Weight With Canopy* 3935lb 1,785kg‖ — metric converted from the published imperial value
Maximum Operating Weight With Canopy** 4045lb 1,835kg‖ — metric converted from the published imperial value

06 Blade Specification

Height 8.9in 226mm‖ — metric converted from the published imperial value

07 Hydraulic System Specification

Hydraulic System Type Load Sensing Hydraulics with Variable Displacement Piston Pump
Operating Pressure - Swing 2132.1psi 14,700kpa‖ — metric converted from the published imperial value
Operating Pressure - Equipment 3553.4psi 24,500kpa‖ — metric converted from the published imperial value
Operating Pressure - Travel 3553.4psi 24,500kpa‖ — metric converted from the published imperial value
Digging Force - Stick - Standard 2135.7lb 968.74kg‖ — metric converted from the published imperial value
Digging Force - Stick - Long 1865.9lb 846.36kg‖ — metric converted from the published imperial value
Digging Force - Bucket 3641.9lb 1,651.9kg‖ — metric converted from the published imperial value
Pump Flow At 2,400 Rpm 17.4gal/min 65.9l/min‖ — metric converted from the published imperial value

08 Blade Specification

Width* 39in 991mm‖ — metric converted from the published imperial value
Note *Expanded 1300 mm (51 in)

09 Hydraulic System Specification

Auxiliary Circuit - Primary - Flow 8.7gal/min 33l/min‖ — metric converted from the published imperial value
Auxiliary Circuit - Primary - Pressure 3553.4psi 24,500kpa‖ — metric converted from the published imperial value
Auxiliary Circuit - Secondary - Flow 3.7gal/min 14l/min‖ — metric converted from the published imperial value
Auxiliary Circuit - Secondary - Pressure 3553.4psi 24,500kpa‖ — metric converted from the published imperial value

10 Service Refill Capacities Specification

Cooling System 1gal 4l‖ — metric converted from the published imperial value
Fuel Tank 5.8gal 22l‖ — metric converted from the published imperial value
Hydraulic Tank 4.8gal 18l‖ — metric converted from the published imperial value
Hydraulic System 6.9gal 26l‖ — metric converted from the published imperial value
Engine Oil 1.2gal 4.5l‖ — metric converted from the published imperial value

11 Sound Specification

Note European Union Directive 2000/14/EC
Average Exterior Sound Pressure (Iso 6395:2008) 93 dB(A)

12 Travel System Specification

Maximum Traction Force - High Speed 2675.2lb 1,213.4kg‖ — metric converted from the published imperial value
Maximum Traction Force - Low Speed 4136.5lb 1,876.3kg‖ — metric converted from the published imperial value
Travel Speed - High 2.7mph 4.3km/h‖ — metric converted from the published imperial value
Travel Speed - Low 1.8mph 2.9km/h‖ — metric converted from the published imperial value
Gradeability - Maximum 30degrees
Ground Pressure - Minimum Weight 4psi 28kpa‖ — metric converted from the published imperial value
Ground Pressure - Maximum Weight 4.2psi 29kpa‖ — metric converted from the published imperial value

13 Weight Increase From Minimum Configuration Specification

Long Stick 22lb 10kg‖ — metric converted from the published imperial value
Steel Tracks 110lb 49.9kg‖ — metric converted from the published imperial value

14 Certification - Canopy Specification

Roll Over Protective Structure (Rops) ISO 12117-2: 2008
Tip Over Protective Structure (Tops) ISO 12117: 1997
Top Guard ISO 10262: 1998 (Level II)

Data notes

‖

Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.

Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.