Specification sheet Compact Track Loader Ref caterpillar-299d-xhp-multi-terrain-loader
Caterpillar 299D XHP
The Caterpillar 299D XHP is a compact track loader with an operating weight of 11,647 lb (5,283 kg), a 106 hp engine, a rated operating capacity of 4,550 lb (2,063.9 kg), and a tipping load of 9,100 lb (4,127.7 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,647lb
5,283kg
Engine power
106hp
79.05kW
Net Power Rated operating capacity
4,550lb
2,063.9kg
Tipping load
9,100lb
4,127.7kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Caterpillar 299D XHP sits at the heavy end of its class:
- Operating weight 11,650 lb heavier than 93% (n=182)
- Engine power 106 hp more powerful than 98% (n=167)
- Rated operating capacity 4,550 lb higher-rated than 92% (n=156)
01 Engine Specification
| Gross Power | 110hp | 82.1kw |
|---|---|---|
| Net Power | 106hp | 79.1kw |
| Displacement | 232cu in | 3.9L |
| Bore | 3.9in | 99.1mm |
| Stroke | 4.7in | 119.4mm |
| Gross Power - Sae J1995 | 110hp | 82.1kw |
| Engine Model | Cat C3.8 (turbocharged) | |
| Net Power - Sae 1349 | 106hp | 79.1kw |
02 Operational Specification
| Operating Weight | 11647lb | 5283kg |
|---|
03 Power Train Specification
| Travel Speed Forward - 2-Speed | 8.5mph | 13.7km/h |
|---|---|---|
| Travel Speed Reverse - 2-Speed | 8.5mph | 13.7km/h |
| Travel Speed Forward | 5mph | 8.1km/h |
| Travel Speed Reverse | 5mph | 8.1km/h |
04 Hydraulic System Specification
| Hydraulic Flow (1) | Standard | |
|---|---|---|
| Hydraulic Power | 44hp | 32.9kw |
| Maximum Loader Hydraulic Flow | 40 gal/min | |
| Maximum Loader Hydraulic Pressure | 4061 psi | |
| Loader Hydraulic Pressure | 3335 psi | |
| Loader Hydraulic Flow | 23 gal/min | |
| Hydraulic Flow (2) | XHP | |
| Hydraulic Power - Calculated | 94hp | 70.1kw |
05 Operating Specifications Specification
| Rated Operating Capacities - 50% Tipping Load | 4550lb | 2063.9kg |
|---|---|---|
| Rated Operating Capacities - 35% Tipping Load | 3185lb | 1444.7kg |
| Ground Contact Area | 2184in2 | 1.5m2 |
| Ground Pressure | 5.3 psi | |
| Tipping Load | 9100lb | 4127.7kg |
| Breakout Force - Tilt Cylinder | 7381lb | 3348kg |
| Breakout Force - Lift Cylinder | 6100lb | 2767kg |
06 Service Refill Capacities Specification
| Cooling System | 3.7gal | 14.1L |
|---|---|---|
| Fuel Tank | 30.8gal | 116.6L |
| Hydraulic Tank | 10.3gal | 39L |
| Engine Crankcase | 2.6gal | 9.9L |
| Hydraulic System | 16gal | 60.6L |
07 Cab Specification
| Rops | SAE J1040 MAY94, ISO 3471:1994 | |
|---|---|---|
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I | |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
08 Dimensions Dimensions
| Ground Clearance | 0.73ft in | 220.98mm |
|---|---|---|
| Bucket Pin Reach - Maximum Lift | 16.11in | 408.94mm |
| Clearance At Maximum Lift And Dump | 95.2in | 2418.08mm |
| Departure Angle | 39 degrees | |
| Length - Track On Ground | 69.6in | 1767.84mm |
| Length - With Bucket On Ground | 151.6in | 3850.64mm |
| Length - Without Bucket | 123.5in | 3136.9mm |
| Maximum Dump Angle | 52 degrees | |
| Maximum Overall Height | 159.4in | 4048.76mm |
| Maximum Reach - With Arms Parallel | 50.7in | 1287.78mm |
| Overall Length - Track | 89.4in | 2270.77mm |
| Rack Back Angle - Maximum Height | 83 degrees | |
| Reach At Maximum Lift/Dump | 31in | 787.4mm |
| Turn Radius From Center - Bucket | 92.4in | 2346.96mm |
| Turn Radius From Center - Coupler | 60.4in | 1534.16mm |
| Turn Radius From Center - Rear | 72.8in | 1849.12mm |
| Bucket Pin Height - Carry Position | 7.7in | 195.58mm |
| Vehicle Width | 76in | 1930.4mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.