Specification sheet Compact Track Loader Ref caterpillar-299d-multi-terrain-loader
Caterpillar 299D
The Caterpillar 299D is a compact track loader with an operating weight of 10,897.45 lb (4,943 kg), a 95 hp engine, a rated operating capacity of 4,250 lb (1,927.8 kg), and a tipping load of 8,498.9 lb (3,855 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,897.45lb
4,943kg
Engine power
95hp
70.85kW
Net Power Rated operating capacity
4,250lb
1,927.8kg
Tipping load
8,498.9lb
3,855kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Caterpillar 299D sits above the median for its class:
- Operating weight 10,900 lb heavier than 84% (n=182)
- Engine power 95 hp more powerful than 89% (n=167)
- Rated operating capacity 4,250 lb higher-rated than 92% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | Cat® C3.8 | |
|---|---|---|
| Gross Power | 98hp | 73.1kw |
| Net Power | 95hp | 70.9kw |
| Displacement | 232cu in | 3.9L |
| Bore | 3.9in | 99.1mm |
| Stroke | 4.7in | 119.4mm |
| Aspiration | Turbocharged | |
| Gross Power - Sae J1995 | 98hp | 73.1kw |
| Engine Model | Cat C3.8 DIT (Turbo) | |
| Net Power - Sae 1349 | 95hp | 70.9kw |
02 Operational Specification
| Operating Weight | 10897.5lb | 4943kg |
|---|---|---|
| Cooling System Fluid Capacity | 3.7gal | 14L |
| Fuel Capacity | 31gal | 117L |
| Hydraulic System Fluid Capacity | 16.2gal | 61L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 100amps | |
| Max Speed - Low Range | 5mph | 8.1km/h |
| Max Speed - High Range | 8.5mph | 13.7km/h |
03 Power Train Specification
| Travel Speed Forward - 2-Speed | 8.4mph | 13.6km/h |
|---|---|---|
| Travel Speed Reverse - 2-Speed | 8.4mph | 13.6km/h |
| Travel Speed Forward | 5.2mph | 8.4km/h |
| Travel Speed Reverse | 5.2mph | 8.4km/h |
04 Loader Specification
| Tipping Load | 8498.9lb | 3855kg |
|---|
05 Weights Specification
| Operating Weight | 10718lb | 4861.7kg |
|---|
06 Hydraulic Specification
| Pump Flow | 23gal/min | 87.1L/min |
|---|
07 Hydraulic System Specification
| Hydraulic Flow (1) | Standard | |
|---|---|---|
| Hydraulic Power | 44hp | 32.9kw |
| Maximum Loader Hydraulic Flow | 32 gal/min | |
| Maximum Loader Hydraulic Pressure | 4061 psi | |
| Loader Hydraulic Pressure | 3335 psi | |
| Loader Hydraulic Flow | 23 gal/min | |
| Hydraulic Flow (2) | High Flow XPS | |
| Hydraulic Power - Calculated | 76hp | 56.7kw |
08 Operating Specifications Specification
| Rated Operating Capacities - 50% Tipping Load | 4250lb | 1927.8kg |
|---|---|---|
| Rated Operating Capacities - 35% Tipping Load | 2975lb | 1349.5kg |
| Ground Contact Area | 2463in2 | 1.6m2 |
| Ground Pressure | 4.4 psi | |
| Rated Operating Capacity With Optional Counterweight | 4500lb | 2041.2kg |
| Tipping Load | 8500lb | 3855.6kg |
| Breakout Force - Tilt Cylinder | 7552lb | 3425.6kg |
| Breakout Force - Lift Cylinder | 6122lb | 2776.9kg |
09 Service Refill Capacities Specification
| Cooling System | 4.1gal | 15.6L |
|---|---|---|
| Fuel Tank | 32.2gal | 121.9L |
| Hydraulic Tank | 10.3gal | 39L |
| Engine Crankcase | 3.5gal | 13.3L |
| Hydraulic System | 14.5gal | 54.9L |
10 Cab Specification
| Rops | ISO 3471:2008 | |
|---|---|---|
| Fops | ISO 3449:2005 Level I | |
| Fops Level Ii | ISO 3449:2005 Level II |
11 Dimensions Dimensions
| Height To Top Of Cab | 6.91ft in | 2104mm |
|---|---|---|
| Ground Clearance | 8.7in | 220.98mm |
| Length Of Track On Ground | 5.8ft in | 1767mm |
| Clearance At Max Lift And Dump | 7.94ft in | 2418mm |
| Reach At Max Lift And Dump | 2.59ft in | 787mm |
| Dump Angle | 52degrees | |
| Length - Track On Ground | 69.6in | 1767.84mm |
| Length - With Bucket On Ground | 151.81in | 3855.72mm |
| Length - Without Bucket | 123.5in | 3136.9mm |
| Vehicle Width | 78in | 1981.2mm |
| Bucket Pin Reach - Maximum Lift | 15.6in | 396.24mm |
| Clearance At Maximum Lift And Dump | 94.3in | 2395.22mm |
| Departure Angle | 30 degrees | |
| Turning Radius From Center - Machine Rear | 72.8in | 1849mm |
| Bucket Pin Height - Carry Position | 7.9in | 200.66mm |
| Length With Bucket | 10.3ft in | 3138mm |
| Length With Out Bucket | 12.64ft in | 3850mm |
| Maximum Dump Angle | 52 degrees | |
| Maximum Overall Height | 158.4in | 4023.36mm |
| Maximum Reach - With Arms Parallel | 50.2in | 1275.08mm |
| Overall Height | 13.29ft in | 4048mm |
| Overall Length - Track | 89.4in | 2270.77mm |
| Overall Track Length | 7.45ft in | 2270mm |
| Rack Back Angle - Maximum Height | 83 degrees | |
| Reach At Maximum Lift/Dump | 30.6in | 777.24mm |
| Turn Radius From Center - Bucket | 91.2in | 2316.48mm |
| Turn Radius From Center - Coupler | 58in | 1473.2mm |
| Turn Radius From Center - Rear | 73.41in | 1864.36mm |
12 Undercarriage Dimensions
| Ground Pressure | 4.41psi | 30.34kPa |
|---|---|---|
| Ground Contact Area | 2463in2 | 1.59m2 |
?Questions & answersfrom this machine's data
- How much does a Caterpillar 299D compact track loader weigh?
- A Caterpillar 299D compact track loader has an operating weight of 10,897.5 lb (4,943 kg).
- How much can a Caterpillar 299D compact track loader lift?
- A Caterpillar 299D compact track loader has a rated operating capacity of 4,250 lb (1,927.8 kg).
- What engine does a Caterpillar 299D compact track loader have?
- A Caterpillar 299D compact track loader is powered by a Cat® C3.8 engine producing 95 hp (70.9 kW).
- How much fuel does a Caterpillar 299D compact track loader hold?
- A Caterpillar 299D compact track loader has a fuel capacity of 31 gal (117 L).
- What is the ground clearance of a Caterpillar 299D compact track loader?
- A Caterpillar 299D compact track loader has a ground clearance of 8.7 in (221 mm).
- How long is a Caterpillar 299D compact track loader?
- A Caterpillar 299D compact track loader has an overall length of 10.3 ft (3,138 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.