Specification sheet Skid Steer Loader Ref caterpillar-268b-skid-steer-loader
Caterpillar 268B
The Caterpillar 268B is a skid steer loader with an operating weight of 7,995 lb (3,626.5 kg), a 76.44 hp engine, a rated operating capacity of 2,698.46 lb (1,224 kg), and a tipping load of 5,612.96 lb (2,546 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,995lb
3,626.5kg
Engine power
76.44hp
57kW
Net Power Rated operating capacity
2,698.46lb
1,224kg
Tipping load
5,612.96lb
2,546kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Caterpillar 268B sits above the median for its class:
- Operating weight 8,000 lb heavier than 78% (n=334)
- Engine power 76 hp more powerful than 77% (n=335)
- Rated operating capacity 2,700 lb higher-rated than 85% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3044C DIT | |
| Gross Power | 82hp | 61.2kw |
| Net Power | 76.5hp | 57kw |
| Aspiration | turbocharged | |
| Bore | 3.7in | 94mm |
| Stroke | 4.7in | 119.4mm |
| Gross Power - Sae J1995 | 82hp | 61.2kw |
| Engine Model | Cat 3044C DIT | |
| Engine Power - Iso 14396 | 80hp | 59.7kw |
| Net Power - Eec 80/1269 | 77hp | 57.5kw |
| Net Power - Iso 9249 Eec | 77hp | 57.5kw |
| Net Power - Sae 1349 | 76hp | 56.7kw |
| Net Flywheel Power | 76hp | 56.7kw |
02 Operational Specification
| Operational Weight | 7994lb | 3626kg |
|---|---|---|
| Fuel Capacity | 23.8gal | 90L |
| Cooling System Fluid Capacity | 2.7gal | 10L |
| Engine Oil Fluid Capacity | 2.7gal | 10L |
| Hydraulic System Fluid Capacity | 14.1gal | 53L |
| Max Speed | 7.3mph | 11.6km/h |
| Chain Box Fluid Capacity - Each Side | 2.2gal | 8L |
| Tire Size | 12x16.5 10PR | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Power Train Specification
| Travel Speed Forward | 7.2mph | 11.6km/h |
|---|---|---|
| Travel Speed Reverse | 7.2mph | 11.6km/h |
| Travel Speed Reverse - 2-Speed Option | 11mph | 17.8km/h |
| Travel Speed Forward - 2-Speed Option | 11mph | 17.8km/h |
04 Loader Specification
| Breakout Force | 5507.2lb | 2498kg |
|---|---|---|
| Operating Load Rating | 2698.5lb | 1224kg |
05 Weights Specification
| Operating Weight | 7995lb | 3626.5kg |
|---|
06 Hydraulic Specification
| Pump Flow Capacity | 33.1gal/min | 125L/min |
|---|---|---|
| Relief Valve Pressure | 4061.1psi | 28000kPa |
07 Hydraulic System Specification
| Hydraulic Power | 78.2hp | 58.3kw |
|---|---|---|
| Maximum Loader Hydraulic Flow | 33 gal/min | |
| Maximum Loader Hydraulic Pressure | 4060 psi | |
| Loader Hydraulic Pressure | 4061.06 psi | |
| Loader Hydraulic Flow | 33.02 gal/min | |
| Hydraulic Flow | High Flow XPS |
08 Service Refill Capacities Specification
| Cooling System | 2.6gal | 9.9L |
|---|---|---|
| Fuel Tank | 23.8gal | 90.1L |
| Hydraulic Tank | 9.2gal | 34.9L |
| Engine Crankcase | 2.6gal | 9.9L |
| Hydraulic System | 14gal | 53L |
| Chain Box - Each Side | 2.1gal | 8L |
09 Cab Specification
| Rops | SAE J1040 MAY94 and ISO3471:1994 | |
|---|---|---|
| Fops | SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I | |
| Fops Level Ii | SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional) |
10 Dimensions Dimensions
| Length With Bucket | 11.87ft in | 3616mm |
|---|---|---|
| Width Over Tires | 6.01ft in | 1829mm |
| Ground Clearance | 8in | 203.2mm |
| Height To Top Of Cab | 6.77ft in | 2063mm |
| Wheelbase | 4.03ft in | 1228mm |
| Length W/O Bucket | 9.53ft in | 2902mm |
| Clearance At Max Lift And Dump | 7.95ft in | 2421mm |
| Reach At Max Lift And Dump | 32.64in | 829mm |
| Length - Without Bucket | 114in | 2895.6mm |
| Maximum Reach - With Arms Parallel | 52in | 1320.8mm |
| Maximum Overall Height | 160in | 4064mm |
| Bucket Pin Height - Carry Position | 8.4in | 213.36mm |
| Bucket Pin Reach - Maximum Lift | 13.6in | 345.44mm |
| Bumper Overhang - Rear Axle | 41in | 1041.41mm |
| Clearance At Maximum Lift And Dump | 95in | 2413mm |
| Length - With Bucket On Ground | 142in | 3606.8mm |
| Turn Radius From Center - Rear | 67in | 1701.8mm |
| Turning Radius From Center - Inc Bucket | 85.83in | 2180mm |
| Turning Radius From Center - Machine Rear | 66.78in | 1696mm |
| Vehicle Width Over Tires | 72in | 1828.8mm |
| Reach - Maximum Lift/Dump | 33in | 838.2mm |
| Turn Radius From Center - Bucket | 86in | 2184.4mm |
| Turn Radius From Center - Coupler | 52in | 1320.8mm |
11 Operating Specifications Dimensions
| Rated Operating Capacity With Optional Counterweight | 2750lb | 1247.38kg |
|---|---|---|
| Breakout Force - Lift Cylinder | 5191.88lb | 2355kg |
| Rated Operating Capacity | 2700lb | 1224.7kg |
| Tipping Load | 5612.96lb | 2546kg |
| Breakout Force - Tilt Cylinder | 5508lb | 2498.39kg |
?Questions & answersfrom this machine's data
- How much does a Caterpillar 268B skid steer weigh?
- A Caterpillar 268B skid steer has an operating weight of 7,995 lb (3,626.5 kg).
- How much can a Caterpillar 268B skid steer lift?
- A Caterpillar 268B skid steer has a rated operating capacity of 2,698.5 lb (1,224 kg).
- What engine does a Caterpillar 268B skid steer have?
- A Caterpillar 268B skid steer is powered by a 3044C DIT engine producing 76.4 hp (57 kW).
- What is the ground clearance of a Caterpillar 268B skid steer?
- A Caterpillar 268B skid steer has a ground clearance of 8 in (203.2 mm).
- How long is a Caterpillar 268B skid steer?
- A Caterpillar 268B skid steer has an overall length of 11.9 ft (3,616 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.