Specification sheet Compact Track Loader Ref caterpillar-267-multi-terrain-loader

Caterpillar 267

The Caterpillar 267 is a compact track loader with an operating weight of 9,154 lb (4,152.19 kg), a 59 hp engine, a rated operating capacity of 2,900 lb (1,315.42 kg), and a tipping load of 5,800 lb (2,630.9 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
9,154lb
4,152.19kg
Engine power
59hp
44kW
Net Power
Rated operating capacity
2,900lb
1,315.42kg
Tipping load
5,800lb
2,630.9kg
Bucket capacity
0.6yd³
0.5m³

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Caterpillar 267 sits in the middle of its class:

  • Operating weight 9,150 lb lighter than 55% (n=182)
  • Engine power 59 hp less powerful than 81% (n=167)
  • Rated operating capacity 2,900 lb higher-rated than 56% (n=156)

Scale drawingdrawn to scale · mm

2074C353D3712A2923B2045E
Side elevation
2074C1898F
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2236
Engine Model 3034
Gross Power 63hp 47kw
Net Power 59hp 44kw
Power Measured @ 2600rpm
Displacement 183cu in 3L
Bore 3.9in 97.1mm
Stroke 4in 100.1mm
Aspiration Natural
Engine Model Cat 3034 naturally aspirated

02 Operational Specification

Operating Weight 9154lb 4152.2kg
Fuel Capacity 21.7gal 82L
Hydraulic System Fluid Capacity 13.8gal 52L
Max Speed - High Range 6.1mph 9.7km/h

03 Power Train Specification

Travel Speed Forward 6mph 9.7km/h
Travel Speed Reverse 6mph 9.7km/h

04 Loader Specification

Operating Load 2900lb 1315.5kg
Bucket Capacity 0.6yd3 0.5m3

05 Weights Specification

Operating Weight 9088lb 4122.3kg

06 Hydraulic Specification

Pump Flow 21.7gal/min 82L/min

07 Operating Specifications Specification

Rated Operating Capacities - 50% Tipping Load 2900lb 1315.5kg
Rated Operating Capacities - 35% Tipping Load 2030lb 920.8kg
Ground Contact Area 2898in2 1.9m2
Ground Pressure 3.1 psi
Tipping Load 5800lb 2630.9kg
Breakout Force - Tilt Cylinder 5259lb 2385.5kg
Breakout Force - Lift Cylinder 4339lb 1968.2kg

08 Service Refill Capacities Specification

Cooling System 2.6gal 9.9L
Fuel Tank 22.7gal 86L
Hydraulic Tank 9.2gal 34.9L
Engine Crankcase 1.8gal 6.9L
Hydraulic System 13.7gal 51.9L

09 Dimensions Dimensions

Width Over Tracks 6.23ft in 1898mm
Height To Top Of Cab 6.81ft in 2074mm
Ground Clearance 13.9in 353mm
Clearance At Max Lift And Dump 7.6ft in 2315mm
Reach At Max Lift And Dump 2.22ft in 676mm
Length With Bucket 12.18ft in 3712mm
Length With Out Bucket 9.59ft in 2923mm
Turning Radius From Center - Inc Bucket 98.98in 2514mm

10 Undercarriage Dimensions

Length Of Track On Ground 6.71ft in 2045mm
Width Of Track 17.72in 450mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.