Specification sheet Skid Steer Loader Ref caterpillar-262d-skid-steer-loader
Caterpillar 262D
The Caterpillar 262D is a skid steer loader with an operating weight of 8,011 lb (3,633.8 kg), a 72.91 hp engine, a rated operating capacity of 2,700 lb (1,224.7 kg), and a tipping load of 5,400 lb (2,449.4 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,011lb
3,633.8kg
Engine power
72.91hp
54.37kW
Net Power Rated operating capacity
2,700lb
1,224.7kg
Tipping load
5,400lb
2,449.4kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Caterpillar 262D sits above the median for its class:
- Operating weight 8,010 lb heavier than 80% (n=334)
- Engine power 73 hp more powerful than 66% (n=335)
- Rated operating capacity 2,700 lb higher-rated than 85% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | Cat C3.3B DIT (turbo) | |
|---|---|---|
| Gross Power | 74.3hp | 55.5kw |
| Net Power | 72.9hp | 54.4kw |
| Max Torque | 195.5lb ft | 265Nm |
| Torque Measured @ | 1500rpm | |
| Displacement | 203cu in | 3.4L |
| Bore | 3.7in | 94mm |
| Stroke | 4.7in | 119.4mm |
| Gross Power - Sae J1995 | 74.3hp | 55.5kw |
| Engine Model | Cat C3.3B DIT (Turbo) | |
| Net Power - Iso 9249 Eec | 73.7hp | 55kw |
| Net Power - Sae 1349 | 72.9hp | 54.4kw |
| Net Flywheel Power | 72.9hp | 54.4kw |
02 Operational Specification
| Operational Weight | 8011.6lb | 3634kg |
|---|---|---|
| Fuel Capacity | 24.9gal | 94L |
| Cooling System Fluid Capacity | 3.7gal | 14L |
| Hydraulic System Fluid Capacity | 13.8gal | 52L |
| Max Speed | 7.7mph | 12.4km/h |
| Chain Box Fluid Capacity - Each Side | 3.4gal | 12.7L |
| Tire Size | 12 × 16.5 | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 80amps |
03 Power Train Specification
| Travel Speed Forward | 7.7mph | 12.4km/h |
|---|---|---|
| Travel Speed Reverse | 7.7mph | 12.4km/h |
| Travel Speed Reverse - 2-Speed Option | 11mph | 17.8km/h |
| Travel Speed Forward - 2-Speed Option | 11mph | 17.8km/h |
04 Weights Specification
| Operating Weight | 8011lb | 3633.8kg |
|---|---|---|
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
05 Hydraulic Specification
| Pump Flow Capacity | 32gal/min | 121L/min |
|---|
06 Hydraulic System Specification
| Hydraulic Flow (1) | Standard | |
|---|---|---|
| Hydraulic Flow (2) | High Flow XPS | |
| Loader Hydraulic Flow (1) | 23 gal/min | |
| Loader Hydraulic Flow (2) | 32 gal/min | |
| Loader Hydraulic Pressure (1) | 3335 psi | |
| Hydraulic Power - Calculated (1) | 44hp | 32.9kw |
| Loader Hydraulic Pressure (2) | 4061 psi | |
| Hydraulic Power - Calculated (2) | 76hp | 56.7kw |
07 Service Refill Capacities Specification
| Cooling System | 3.7gal | 14.1L |
|---|---|---|
| Fuel Tank | 24.8gal | 93.9L |
| Hydraulic Tank | 10.3gal | 39L |
| Engine Crankcase | 3gal | 11.4L |
| Hydraulic System | 13.7gal | 51.9L |
| Chain Box - Each Side | 3.3gal | 12.5L |
08 Cab Specification
| Rops | ISO 3471:2008 | |
|---|---|---|
| Fops | ISO 3449:2005 Level I | |
| Fops Level Ii | ISO 3449:2005 Level II |
09 Air Conditioning System Specification
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
|---|
10 Noise Level Specification
| Inside Cab* | 81 dB(A) | |
|---|---|---|
| Outside Cab** | 101 dB(A) | |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. | |
| Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. | |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
11 Dimensions Dimensions
| Length With Bucket | 12.19ft in | 3714mm |
|---|---|---|
| Ground Clearance | 8.9in | 226.06mm |
| Height To Top Of Cab | 6.93ft in | 2110mm |
| Wheelbase | 4.1ft in | 1249mm |
| Length W/O Bucket | 9.83ft in | 2995mm |
| Clearance At Max Lift And Dump | 7.81ft in | 2380mm |
| Reach At Max Lift And Dump | 30.95in | 786mm |
| Clearance At Maximum Lift And Dump | 93.7in | 2379.98mm |
| Departure Angle | 26 degrees | |
| Bucket Pin Height - Carry Position | 7.9in | 200.66mm |
| Hinge Pin Height - Fully Raised | 124.89in | 3172mm |
| Length - With Bucket On Ground | 146.2in | 3713.48mm |
| Length - Without Bucket | 117.9in | 2994.66mm |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). | |
| Maximum Dump Angle | 51 degrees | |
| Maximum Overall Height | 157.81in | 4008.12mm |
| Maximum Reach - With Arms Parallel | 50.9in | 1292.86mm |
| Rack Back Angle - Maximum Height | 84 degrees | |
| Bucket Pin Reach - Maximum Lift | 15.5in | 393.7mm |
| Bumper Overhang - Rear Axle | 42.6in | 1082.04mm |
| Turn Radius From Center - Rear | 71.1in | 1805.94mm |
| Turning Radius From Center - Inc Bucket | 85.87in | 2181mm |
| Turning Radius From Center - Machine Rear | 71.07in | 1805mm |
| Vehicle Width Over Tires | 66in | 1676.4mm |
| Reach - Maximum Lift/Dump | 30.9in | 784.86mm |
| Turn Radius From Center - Bucket | 85.9in | 2181.86mm |
| Turn Radius From Center - Coupler | 55.2in | 1402.08mm |
12 Operating Specifications Dimensions
| Rated Operating Capacity | 2700lb | 1224.7kg |
|---|---|---|
| Rated Operating Capacity With Optional Counterweight | 2950lb | 1338.1kg |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). | |
| Breakout Force - Tilt Cylinder | 7355lb | 3336.18kg |
| Tipping Load | 5400lb | 2449.4kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.