Specification sheet Compact Track Loader Ref caterpillar-259b-series-3-multi-terrain-loader
Caterpillar 259B Series 3
The Caterpillar 259B Series 3 is a compact track loader with an operating weight of 9,226.35 lb (4,185 kg), a 71 hp engine, a rated operating capacity of 2,949.79 lb (1,338 kg), and a tipping load of 5,900 lb (2,676.2 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,226.35lb
4,185kg
Engine power
71hp
52.95kW
Net Power Rated operating capacity
2,949.79lb
1,338kg
Tipping load
5,900lb
2,676.2kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Caterpillar 259B Series 3 sits in the middle of its class:
- Operating weight 9,230 lb lighter than 54% (n=182)
- Engine power 71 hp less powerful than 60% (n=167)
- Rated operating capacity 2,950 lb higher-rated than 60% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | C3.4 DIT | |
| Gross Power | 74hp | 55.2kw |
| Net Power | 71hp | 53kw |
| Displacement | 201cu in | 3.3L |
| Bore | 3.7in | 94mm |
| Stroke | 4.7in | 119.4mm |
| Gross Power - Sae J1995 | 74hp | 55.2kw |
| Engine Model | Cat C3.4T | |
| Net Power - Sae 1349 | 71hp | 53kw |
02 Operational Specification
| Operating Weight | 9226.4lb | 4185kg |
|---|---|---|
| Cooling System Fluid Capacity | 2.7gal | 10L |
| Fuel Capacity | 22.2gal | 84L |
| Engine Oil Capacity | 2.4gal | 9L |
| Hydraulic System Fluid Capacity | 14.6gal | 55L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps | |
| Max Speed - Low Range | 5.9mph | 9.5km/h |
| Max Speed - High Range | 8.5mph | 13.7km/h |
03 Power Train Specification
| Travel Speed Forward - 2-Speed | 8.5mph | 13.7km/h |
|---|---|---|
| Travel Speed Reverse - 2-Speed | 8.5mph | 13.7km/h |
| Travel Speed Forward | 5.9mph | 9.5km/h |
| Travel Speed Reverse | 5.9mph | 9.5km/h |
04 Loader Specification
| Breakout Force | 4508.5lb | 2045kg |
|---|---|---|
| Operating Load | 2949.8lb | 1338kg |
05 Weights Specification
| Operating Weight | 8934lb | 4052.4kg |
|---|
06 Hydraulic Specification
| Pump Flow | 22gal/min | 83L/min |
|---|---|---|
| Relief Valve Pressure | 3335psi | 22994kPa |
07 Hydraulic System Specification
| Hydraulic Flow (1) | Standard | |
|---|---|---|
| Hydraulic Power | 42.8hp | 32kw |
| Loader Hydraulic Pressure | 3335 psi | |
| Hydraulic Flow (2) | High Flow | |
| Hydraulic Power - Calculated | 60.3hp | 45kw |
| Loader Hydraulic Flow (1) | 22 gal/min | |
| Loader Hydraulic Flow (2) | 31 gal/min |
08 Operating Specifications Specification
| Rated Operating Capacities - 50% Tipping Load | 2950lb | 1338.1kg |
|---|---|---|
| Rated Operating Capacities - 35% Tipping Load | 2065lb | 936.7kg |
| Ground Contact Area | 1495in2 | 1m2 |
| Ground Pressure | 6 psi | |
| Rated Operating Capacity With Optional Counterweight | 3000lb | 1360.8kg |
| Tipping Load | 5900lb | 2676.2kg |
| Breakout Force - Tilt Cylinder | 4508lb | 2044.8kg |
09 Service Refill Capacities Specification
| Cooling System | 2.6gal | 9.9L |
|---|---|---|
| Fuel Tank | 22.2gal | 84.1L |
| Hydraulic Tank | 9.2gal | 34.9L |
| Engine Crankcase | 2.4gal | 9.1L |
| Hydraulic System | 14.5gal | 54.9L |
10 Cab Specification
| Rops | SAE J1040 MAY94, ISO 3471:1994 | |
|---|---|---|
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I | |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
11 Dimensions Dimensions
| Width Over Tracks | 5.76ft in | 1755mm |
|---|---|---|
| Height To Top Of Cab | 6.52ft in | 1986mm |
| Ground Clearance | 9in | 228.6mm |
| Clearance At Max Lift And Dump | 7.36ft in | 2243mm |
| Reach At Max Lift And Dump | 2.43ft in | 740mm |
| Length - Track On Ground | 59in | 1498.6mm |
| Length - With Bucket On Ground | 135in | 3429mm |
| Length - Without Bucket | 107in | 2717.8mm |
| Length With Out Bucket | 8.94ft in | 2722mm |
| Clearance At Maximum Lift And Dump | 88in | 2235.2mm |
| Departure Angle | 35 degrees | |
| Turn Radius From Center - Rear | 58in | 1473.2mm |
| Turning Radius From Center - Inc Bucket | 85.6in | 2174mm |
| Turning Radius From Center - Machine Rear | 57.92in | 1471mm |
| Vehicle Width | 66in | 1676.4mm |
| Length With Bucket | 11.26ft in | 3432mm |
| Bucket Pin Height - Carry Position | 8in | 203.2mm |
| Maximum Dump Angle | 49.5 degrees | |
| Maximum Overall Height | 152in | 3860.8mm |
| Maximum Reach - With Arms Parallel | 53in | 1346.2mm |
| Overall Length - Track | 79in | 2006.6mm |
| Rack Back Angle - Maximum Height | 87 degrees | |
| Reach At Maximum Lift/Dump | 29in | 736.6mm |
| Turn Radius From Center - Bucket | 86in | 2184.4mm |
| Turn Radius From Center - Coupler | 55in | 1397mm |
12 Undercarriage Dimensions
| Length Of Track On Ground | 4.91ft in | 1495mm |
|---|---|---|
| Width Of Track | 15.75in | 400mm |
| Ground Pressure | 5psi | 34.48kPa |
| Ground Contact Area | 1848in2 | 1.2m2 |
?Questions & answersfrom this machine's data
- How much does a Caterpillar 259B Series 3 compact track loader weigh?
- A Caterpillar 259B Series 3 compact track loader has an operating weight of 9,226.4 lb (4,185 kg).
- How much can a Caterpillar 259B Series 3 compact track loader lift?
- A Caterpillar 259B Series 3 compact track loader has a rated operating capacity of 2,949.8 lb (1,338 kg).
- What engine does a Caterpillar 259B Series 3 compact track loader have?
- A Caterpillar 259B Series 3 compact track loader is powered by a C3.4 DIT engine producing 71 hp (53 kW).
- How much fuel does a Caterpillar 259B Series 3 compact track loader hold?
- A Caterpillar 259B Series 3 compact track loader has a fuel capacity of 22.2 gal (84 L).
- What is the ground clearance of a Caterpillar 259B Series 3 compact track loader?
- A Caterpillar 259B Series 3 compact track loader has a ground clearance of 9 in (228.6 mm).
- How long is a Caterpillar 259B Series 3 compact track loader?
- A Caterpillar 259B Series 3 compact track loader has an overall length of 11.3 ft (3,432 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.