Specification sheet Compact Track Loader Ref caterpillar-257-multi-terrain-loader

Caterpillar 257

The Caterpillar 257 is a compact track loader with an operating weight of 7,676 lb (3,481.78 kg), a 59 hp engine, a rated operating capacity of 2,350 lb (1,065.95 kg), and a tipping load of 4,610 lb (2,091.1 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
7,676lb
3,481.78kg
Engine power
59hp
44kW
Net Power
Rated operating capacity
2,350lb
1,065.95kg
Tipping load
4,610lb
2,091.1kg
Bucket capacity
0.6yd³
0.5m³

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Caterpillar 257 sits below the median for its class:

  • Operating weight 7,680 lb lighter than 76% (n=182)
  • Engine power 59 hp less powerful than 81% (n=167)
  • Rated operating capacity 2,350 lb lower-rated than 60% (n=156)

Scale drawingdrawn to scale · mm

2022C257D3518A2701B1499E
Side elevation
2022C1676F
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2236
Engine Model 3034T
Gross Power 63hp 47kw
Net Power 59hp 44kw
Power Measured @ 2600rpm
Displacement 183cu in 3L
Bore 3.9in 97.1mm
Stroke 4in 100.1mm
Aspiration Turbocharged
Engine Model Cat 3034 naturally aspirated

02 Operational Specification

Operating Weight 7676lb 3481.8kg
Fuel Capacity 23.8gal 90L
Hydraulic System Fluid Capacity 14.6gal 55L
Max Speed - High Range 7mph 11.2km/h

03 Power Train Specification

Travel Speed Forward 7.5mph 12.1km/h
Travel Speed Reverse 7.5mph 12.1km/h

04 Loader Specification

Operating Load 2350lb 1066kg
Bucket Capacity 0.6yd3 0.5m3

05 Weights Specification

Operating Weight 7628lb 3460.1kg

06 Hydraulic Specification

Pump Flow 15.2gal/min 57.2L/min

07 Operating Specifications Specification

Rated Operating Capacities - 50% Tipping Load 2306lb 1046kg
Rated Operating Capacities - 35% Tipping Load 1614lb 732.1kg
Ground Contact Area 1770in2 1.2m2
Ground Pressure 4.3 psi
Tipping Load 4610lb 2091.1kg
Breakout Force - Tilt Cylinder 3532lb 1602.1kg
Breakout Force - Lift Cylinder 3490lb 1583.1kg

08 Service Refill Capacities Specification

Cooling System 2.6gal 9.9L
Fuel Tank 23.8gal 90.1L
Hydraulic Tank 9.2gal 34.9L
Engine Crankcase 1.8gal 6.9L
Hydraulic System 14.5gal 54.9L

09 Dimensions Dimensions

Width Over Tracks 5.5ft in 1676mm
Height To Top Of Cab 6.64ft in 2022mm
Ground Clearance 10.12in 257mm
Clearance At Max Lift And Dump 7.47ft in 2275mm
Reach At Max Lift And Dump 2.62ft in 797mm
Length With Bucket 11.55ft in 3518mm
Length With Out Bucket 8.87ft in 2701mm
Turning Radius From Center - Inc Bucket 90.28in 2293mm

10 Undercarriage Dimensions

Length Of Track On Ground 4.92ft in 1499mm
Width Of Track 15in 381mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.