Specification sheet Skid Steer Loader Ref caterpillar-252b-series-2-skid-steer-loader
Caterpillar 252B Series 2
The Caterpillar 252B Series 2 is a skid steer loader with an operating weight of 7,861 lb (3,565.7 kg), a 70 hp engine, a rated operating capacity of 2,500 lb (1,134 kg), and a tipping load of 5,000 lb (2,267.97 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,861lb
3,565.7kg
Engine power
70hp
52kW
Net Power Rated operating capacity
2,500lb
1,134kg
Tipping load
5,000lb
2,267.97kg
Bucket capacity
0.5yd³
0.4m³
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Caterpillar 252B Series 2 sits above the median for its class:
- Operating weight 7,860 lb heavier than 75% (n=334)
- Engine power 70 hp more powerful than 59% (n=335)
- Rated operating capacity 2,500 lb higher-rated than 77% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3044C DIT | |
| Gross Power | 75hp | 56kw |
| Net Power | 70hp | 52kw |
| Power Measured @ | 2600rpm | |
| Displacement | 201cu in | 3.3L |
| Bore | 3.7in | 94mm |
| Stroke | 4.7in | 119.4mm |
| Gross Power - Sae J1995 | 75hp | 56kw |
| Engine Model | Cat C3.4 DIT | |
| Net Power - Sae 1349 | 71hp | 53kw |
| Net Flywheel Power | 71hp | 53kw |
02 Operational Specification
| Operational Weight | 7861lb | 3565kg |
|---|---|---|
| Fuel Capacity | 23.8gal | 90L |
| Cooling System Fluid Capacity | 2.6gal | 10L |
| Engine Oil Fluid Capacity | 2.6gal | 10L |
| Hydraulic System Fluid Capacity | 14gal | 53L |
| Max Speed | 7mph | 11.3km/h |
| Chain Box Fluid Capacity - Each Side | 2.1gal | 8L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Power Train Specification
| Travel Speed Forward | 7mph | 11.3km/h |
|---|---|---|
| Travel Speed Reverse | 7mph | 11.3km/h |
| Travel Speed Reverse - 2-Speed Option | 11mph | 17.8km/h |
| Travel Speed Forward - 2-Speed Option | 11mph | 17.8km/h |
04 Loader Specification
| Breakout Force | 5508lb | 2498kg |
|---|---|---|
| Operating Load Rating | 2500lb | 1134kg |
| Bucket Capacity | 0.5yd3 | 0.4m3 |
05 Weights Specification
| Operating Weight | 7861lb | 3565.7kg |
|---|
06 Hydraulic Specification
| Pump Flow Capacity | 22gal/min | 81L/min |
|---|---|---|
| Relief Valve Pressure | 3335psi | 23000kPa |
07 Hydraulic System Specification
| Hydraulic Power | 42.8hp | 32kw |
|---|---|---|
| Loader Hydraulic Pressure | 3335 psi | |
| Loader Hydraulic Flow | 22 gal/min | |
| Hydraulic Flow | Standard |
08 Service Refill Capacities Specification
| Cooling System | 2.6gal | 9.9L |
|---|---|---|
| Fuel Tank | 23.8gal | 90.1L |
| Hydraulic Tank | 9.2gal | 34.9L |
| Engine Crankcase | 2.4gal | 9.1L |
| Hydraulic System | 14gal | 53L |
| Chain Box - Each Side | 2.1gal | 8L |
09 Cab Specification
| Rops | SAE J1040 MAY94, ISO 3471:1994 | |
|---|---|---|
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I | |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
10 Dimensions Dimensions
| Length With Bucket | 11.87ft in | 3616mm |
|---|---|---|
| Width Over Tires | 6ft in | 1829mm |
| Ground Clearance | 7.7in | 195.58mm |
| Height To Top Of Cab | 6.88ft in | 2063mm |
| Wheelbase | 4.02ft in | 1228mm |
| Length W/O Bucket | 9.52ft in | 2901mm |
| Clearance At Max Lift And Dump | 7.94ft in | 2421mm |
| Reach At Max Lift And Dump | 32.6in | 829mm |
| Length - With Bucket On Ground | 142in | 3606.8mm |
| Length - Without Bucket | 114in | 2895.6mm |
| Maximum Dump Angle | 51 degrees | |
| Maximum Reach - With Arms Parallel | 52in | 1320.8mm |
| Rack Back Angle - Maximum Height | 87 degrees | |
| Reach - Maximum Lift/Dump | 33in | 838.2mm |
| Maximum Overall Height | 160in | 4064mm |
| Bucket Pin Height - Carry Position | 8.4in | 213.36mm |
| Bucket Pin Reach - Maximum Lift | 13.7in | 347.98mm |
| Bumper Overhang - Rear Axle | 41in | 1041.41mm |
| Clearance At Maximum Lift And Dump | 95in | 2413mm |
| Departure Angle | 26.4 degrees | |
| Turning Radius From Center - Inc Bucket | 86in | 2180mm |
| Turning Radius From Center - Machine Rear | 67in | 1696mm |
| Vehicle Width Over Tires | 72in | 1828.8mm |
| Turn Radius From Center - Bucket | 86in | 2184.4mm |
| Turn Radius From Center - Coupler | 52in | 1320.8mm |
| Turn Radius From Center - Rear | 67in | 1701.8mm |
11 Operating Specifications Dimensions
| Rated Operating Capacity With Optional Counterweight | 2550lb | 1156.67kg |
|---|---|---|
| Tipping Load | 5000lb | 2267.97kg |
| Breakout Force - Tilt Cylinder | 5508lb | 2498.39kg |
| Rated Operating Capacity | 2500lb | 1133.99kg |
?Questions & answersfrom this machine's data
- How much does a Caterpillar 252B Series 2 skid steer weigh?
- A Caterpillar 252B Series 2 skid steer has an operating weight of 7,861 lb (3,565.7 kg).
- How much can a Caterpillar 252B Series 2 skid steer lift?
- A Caterpillar 252B Series 2 skid steer has a rated operating capacity of 2,500 lb (1,134 kg).
- What engine does a Caterpillar 252B Series 2 skid steer have?
- A Caterpillar 252B Series 2 skid steer is powered by a 3044C DIT engine producing 70 hp (52 kW).
- What is the ground clearance of a Caterpillar 252B Series 2 skid steer?
- A Caterpillar 252B Series 2 skid steer has a ground clearance of 7.7 in (195.6 mm).
- How long is a Caterpillar 252B Series 2 skid steer?
- A Caterpillar 252B Series 2 skid steer has an overall length of 11.9 ft (3,616 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.