Specification sheet Compact Track Loader Ref caterpillar-247b-multi-terrain-loader

Caterpillar 247B

The Caterpillar 247B is a compact track loader with an operating weight of 6,666.78 lb (3,024 kg), a 57.67 hp engine, a rated operating capacity of 1,951.1 lb (885 kg), and a tipping load of 3,906.6 lb (1,772.01 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
6,666.78lb
3,024kg
Engine power
57.67hp
43kW
Net Power
Rated operating capacity
1,951.1lb
885kg
Tipping load
3,906.6lb † — value reconstructed from related published figures
1,772.01kg

◆Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Caterpillar 247B sits below the median for its class:

  • Operating weight 6,670 lb lighter than 85% (n=182)
  • Engine power 58 hp less powerful than 83% (n=167)
  • Rated operating capacity 1,950 lb lower-rated than 77% (n=156)

◇Scale drawingdrawn to scale · mm

1990C267D3285A2518B1499E
Side elevation
1990C1676F
Front elevation

01 Engine Specification

Engine Make 2236
Engine Model 3024C T
Gross Power 61.7hp 46kw
Net Power 57.7hp 43kw
Displacement 134.3cu in 2.2L
Aspiration turbocharged

02 Operational Specification

Operating Weight 6666.8lb 3024kg
Cooling System Fluid Capacity 2.7gal 10L
Engine Oil Capacity 2.2gal 8L
Fuel Capacity 17.2gal 65L
Hydraulic System Fluid Capacity 14.6gal 55L
Operating Voltage 12V
Alternator Supplied Amperage 85amps
Max Speed - High Range 7.6mph 12.2km/h

03 Loader Specification

Breakout Force 3734.7lb 1694kg
Operating Load 1951.1lb 885kg

04 Hydraulic Specification

Pump Flow 15.9gal/min 60L/min
Relief Valve Pressure 3335.9psi 23000kPa

05 Dimensions Dimensions

Width Over Tracks 5.5ft in 1676mm
Height To Top Of Cab 6.53ft in 1990mm
Ground Clearance 10.52in 267mm
Clearance At Max Lift And Dump 7.01ft in 2134mm
Reach At Max Lift And Dump 2.06ft in 625mm
Turning Radius From Center - Machine Rear 53.39in 1356mm
Length With Bucket 10.78ft in 3285mm
Length With Out Bucket 8.27ft in 2518mm
Turning Radius From Center - Inc Bucket 84.93in 2157mm

06 Undercarriage Dimensions

Length Of Track On Ground 4.92ft in 1499mm
Ground Contact Area 1767.01in2 1.14m2
Ground Pressure 3.78psi 26kPa

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.