Specification sheet Compact Track Loader Ref caterpillar-247-multi-terrain-loader
Caterpillar 247
The Caterpillar 247 is a compact track loader with an operating weight of 6,629 lb (3,006.87 kg), a 54 hp engine, a rated operating capacity of 2,100 lb (952.55 kg), and a tipping load of 3,865 lb (1,753.2 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,629lb
3,006.87kg
Engine power
54hp
40.27kW
Net Power Rated operating capacity
2,100lb
952.55kg
Tipping load
3,865lb
1,753.2kg
Bucket capacity
0.5yd³
0.4m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Caterpillar 247 sits at the compact end of its class:
- Operating weight 6,630 lb lighter than 86% (n=182)
- Engine power 54 hp less powerful than 88% (n=167)
- Rated operating capacity 2,100 lb lower-rated than 71% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3034 | |
| Gross Power | 58hp | 43.3kw |
| Net Power | 54hp | 40.3kw |
| Power Measured @ | 2600rpm | |
| Displacement | 183cu in | 3L |
| Bore | 3.9in | 97.1mm |
| Stroke | 4in | 100.1mm |
| Engine Model | Cat 3034 naturally aspirated |
02 Operational Specification
| Operating Weight | 6629lb | 3006.9kg |
|---|---|---|
| Fuel Capacity | 16.4gal | 62L |
| Hydraulic System Fluid Capacity | 14.6gal | 55L |
| Max Speed - High Range | 7.5mph | 12km/h |
03 Power Train Specification
| Travel Speed Forward | 7.5mph | 12.1km/h |
|---|---|---|
| Travel Speed Reverse | 7.5mph | 12.1km/h |
04 Loader Specification
| Operating Load | 2100lb | 952.6kg |
|---|---|---|
| Bucket Capacity | 0.5yd3 | 0.4m3 |
05 Weights Specification
| Operating Weight | 6665lb | 3023.2kg |
|---|
06 Hydraulic Specification
| Pump Flow | 14.4gal/min | 54.3L/min |
|---|
07 Operating Specifications Specification
| Rated Operating Capacities - 50% Tipping Load | 1993lb | 904.1kg |
|---|---|---|
| Rated Operating Capacities - 35% Tipping Load | 1354lb | 614.2kg |
| Ground Contact Area | 1770in2 | 1.2m2 |
| Ground Pressure | 3.8 psi | |
| Tipping Load | 3865lb | 1753.2kg |
| Breakout Force - Tilt Cylinder | 3536lb | 1604kg |
| Breakout Force - Lift Cylinder | 3011lb | 1365.8kg |
08 Service Refill Capacities Specification
| Cooling System | 2.6gal | 9.9L |
|---|---|---|
| Fuel Tank | 17gal | 64.4L |
| Hydraulic Tank | 9.2gal | 34.9L |
| Engine Crankcase | 1.8gal | 6.9L |
| Hydraulic System | 14.5gal | 54.9L |
09 Dimensions Dimensions
| Width Over Tracks | 5.5ft in | 1676mm |
|---|---|---|
| Height To Top Of Cab | 6.53ft in | 1990mm |
| Ground Clearance | 10.52in | 267mm |
| Clearance At Max Lift And Dump | 6.9ft in | 2101mm |
| Reach At Max Lift And Dump | 2.09ft in | 637mm |
| Length With Bucket | 10.87ft in | 3313mm |
| Length With Out Bucket | 8.27ft in | 2518mm |
| Turning Radius From Center - Inc Bucket | 85.04in | 2160mm |
10 Undercarriage Dimensions
| Length Of Track On Ground | 4.92ft in | 1499mm |
|---|---|---|
| Width Of Track | 15in | 381mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.