Specification sheet Skid Steer Loader Ref caterpillar-246b-skid-steer-loader
Caterpillar 246B
The Caterpillar 246B is a skid steer loader with an operating weight of 7,142 lb (3,239.6 kg), a 79.13 hp engine, a rated operating capacity of 1,999.6 lb (907 kg), and a tipping load of 4,188 lb (1,899.65 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,142lb
3,239.6kg
Engine power
79.13hp
59kW
Net Power Rated operating capacity
1,999.6lb
907kg
Tipping load
4,188lb
1,899.65kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Caterpillar 246B sits above the median for its class:
- Operating weight 7,140 lb heavier than 62% (n=334)
- Engine power 79 hp more powerful than 80% (n=335)
- Rated operating capacity 2,000 lb higher-rated than 53% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3044C DIT | |
| Gross Power | 82hp | 61.2kw |
| Net Power | 79.2hp | 59kw |
| Aspiration | turbocharged | |
| Bore | 3.7in | 94mm |
| Stroke | 4.7in | 119.4mm |
| Gross Power - Sae J1995 | 82hp | 61.2kw |
| Engine Model | Cat 3044C DIT | |
| Engine Power - Iso 14396 | 80hp | 59.7kw |
| Net Power - Eec 80/1269 | 78hp | 58.2kw |
| Net Power - Iso 9249 Eec | 78hp | 58.2kw |
| Net Power - Sae 1349 | 78hp | 58.2kw |
| Net Flywheel Power | 78hp | 58.2kw |
02 Operational Specification
| Operational Weight | 7140.8lb | 3239kg |
|---|---|---|
| Fuel Capacity | 23.8gal | 90L |
| Cooling System Fluid Capacity | 2.7gal | 10L |
| Engine Oil Fluid Capacity | 2.7gal | 10L |
| Hydraulic System Fluid Capacity | 13.8gal | 52L |
| Max Speed | 7.8mph | 12.5km/h |
| Chain Box Fluid Capacity - Each Side | 1.9gal | 7L |
| Tire Size | 12x16.5 10PR | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Power Train Specification
| Travel Speed Forward | 7.7mph | 12.4km/h |
|---|---|---|
| Travel Speed Reverse | 7.7mph | 12.4km/h |
| Travel Speed Reverse - 2-Speed Option | 11.8mph | 19km/h |
| Travel Speed Forward - 2-Speed Option | 11.8mph | 19km/h |
04 Loader Specification
| Breakout Force | 5482.9lb | 2487kg |
|---|---|---|
| Operating Load Rating | 1999.6lb | 907kg |
05 Weights Specification
| Operating Weight | 7142lb | 3239.6kg |
|---|
06 Hydraulic Specification
| Pump Flow Capacity | 22gal/min | 83L/min |
|---|---|---|
| Relief Valve Pressure | 3335.9psi | 23000kPa |
07 Hydraulic System Specification
| Hydraulic Power | 42.8hp | 32kw |
|---|---|---|
| Loader Hydraulic Pressure | 3335 psi | |
| Loader Hydraulic Flow | 22 gal/min | |
| Hydraulic Flow | Standard flow |
08 Service Refill Capacities Specification
| Cooling System | 2.6gal | 9.9L |
|---|---|---|
| Fuel Tank | 23.8gal | 90.1L |
| Hydraulic Tank | 9.2gal | 34.9L |
| Engine Crankcase | 2.6gal | 9.9L |
| Hydraulic System | 13.7gal | 51.9L |
| Chain Box - Each Side | 1.8gal | 6.9L |
09 Cab Specification
| Rops | SAE J1040 MAY94 and ISO3471:1994 | |
|---|---|---|
| Fops | SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I | |
| Fops Level Ii | SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional) |
10 Dimensions Dimensions
| Length With Bucket | 11.54ft in | 3515mm |
|---|---|---|
| Width Over Tires | 5.5ft in | 1676mm |
| Ground Clearance | 9in | 228.6mm |
| Height To Top Of Cab | 6.87ft in | 2092mm |
| Wheelbase | 3.73ft in | 1134mm |
| Length W/O Bucket | 9.19ft in | 2800mm |
| Clearance At Max Lift And Dump | 7.87ft in | 2398mm |
| Reach At Max Lift And Dump | 21.3in | 541mm |
| Maximum Overall Height | 156in | 3962.4mm |
| Maximum Reach - With Arms Parallel | 53in | 1346.2mm |
| Bucket Pin Height - Carry Position | 10in | 254mm |
| Bumper Overhang - Rear Axle | 41in | 1041.41mm |
| Clearance At Maximum Lift And Dump | 94in | 2387.6mm |
| Length - With Bucket On Ground | 138in | 3505.2mm |
| Length - Without Bucket | 110in | 2794mm |
| Turn Radius From Center - Rear | 64in | 1625.6mm |
| Turning Radius From Center - Inc Bucket | 82.56in | 2097mm |
| Turning Radius From Center - Machine Rear | 63.9in | 1623mm |
| Vehicle Width Over Tires | 66in | 1676.4mm |
| Reach - Maximum Lift/Dump | 21in | 533.4mm |
| Turn Radius From Center - Bucket | 83in | 2108.2mm |
| Turn Radius From Center - Coupler | 52in | 1320.8mm |
11 Operating Specifications Dimensions
| Rated Operating Capacity With Optional Counterweight | 2100lb | 952.55kg |
|---|---|---|
| Breakout Force - Lift Cylinder | 4656.16lb | 2112kg |
| Rated Operating Capacity | 2000lb | 907.19kg |
| Tipping Load | 4188lb | 1899.65kg |
| Breakout Force - Tilt Cylinder | 5484lb | 2487.51kg |
?Questions & answersfrom this machine's data
- How much does a Caterpillar 246B skid steer weigh?
- A Caterpillar 246B skid steer has an operating weight of 7,142 lb (3,239.6 kg).
- How much can a Caterpillar 246B skid steer lift?
- A Caterpillar 246B skid steer has a rated operating capacity of 1,999.6 lb (907 kg).
- What engine does a Caterpillar 246B skid steer have?
- A Caterpillar 246B skid steer is powered by a 3044C DIT engine producing 79.1 hp (59 kW).
- What is the ground clearance of a Caterpillar 246B skid steer?
- A Caterpillar 246B skid steer has a ground clearance of 9 in (228.6 mm).
- How long is a Caterpillar 246B skid steer?
- A Caterpillar 246B skid steer has an overall length of 11.5 ft (3,515 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.