Specification sheet Skid Steer Loader Ref caterpillar-242b-series-2-skid-steer-loader
Caterpillar 242B Series 2
The Caterpillar 242B Series 2 is a skid steer loader with an operating weight of 6,914 lb (3,136.2 kg), a 57 hp engine, a rated operating capacity of 2,100 lb (952 kg), and a tipping load of 4,200 lb (1,905.09 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,914lb
3,136.2kg
Engine power
57hp
42kW
Net Power Rated operating capacity
2,100lb
952kg
Tipping load
4,200lb
1,905.09kg
Bucket capacity
0.5yd³
0.4m³
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Caterpillar 242B Series 2 sits in the middle of its class:
- Operating weight 6,910 lb heavier than 54% (n=334)
- Engine power 57 hp less powerful than 61% (n=335)
- Rated operating capacity 2,100 lb higher-rated than 62% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2236 | |
| Engine Model | 3024C T | |
| Gross Power | 61hp | 45.5kw |
| Net Power | 57hp | 42kw |
| Power Measured @ | 2600rpm | |
| Displacement | 134cu in | 2.2L |
| Bore | 3.3in | 83.9mm |
| Stroke | 3.9in | 99.1mm |
| Gross Power - Sae J1995 | 61hp | 45.5kw |
| Engine Model | Cat C2.2 T | |
| Net Power - Sae 1349 | 56hp | 41.8kw |
| Net Flywheel Power | 56hp | 41.8kw |
02 Operational Specification
| Operational Weight | 6914lb | 3136kg |
|---|---|---|
| Fuel Capacity | 15.3gal | 58L |
| Cooling System Fluid Capacity | 2.6gal | 10L |
| Engine Oil Fluid Capacity | 2.6gal | 10L |
| Max Speed | 6.8mph | 11km/h |
| Hydraulic System Fluid Capacity | 14.5gal | 55L |
| Chain Box Fluid Capacity - Each Side | 1.6gal | 6L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 85amps |
03 Power Train Specification
| Travel Speed Forward | 6.8mph | 11km/h |
|---|---|---|
| Travel Speed Reverse | 6.8mph | 11km/h |
04 Loader Specification
| Breakout Force | 4060lb | 1841kg |
|---|---|---|
| Operating Load Rating | 2100lb | 952kg |
| Bucket Capacity | 0.5yd3 | 0.4m3 |
05 Weights Specification
| Operating Weight | 6914lb | 3136.2kg |
|---|
06 Hydraulic Specification
| Pump Flow Capacity | 15.6gal/min | 60L/min |
|---|---|---|
| Relief Valve Pressure | 3335psi | 23000kPa |
07 Hydraulic System Specification
| Hydraulic Flow (1) | Standard | |
|---|---|---|
| Hydraulic Power | 30.4hp | 22.7kw |
| Maximum Loader Hydraulic Flow | 26 gal/min | |
| Maximum Loader Hydraulic Pressure | 3335 psi | |
| Loader Hydraulic Pressure | 3335 psi | |
| Loader Hydraulic Flow | 15.6 gal/min | |
| Hydraulic Flow (2) | High Flow |
08 Service Refill Capacities Specification
| Cooling System | 2.6gal | 9.9L |
|---|---|---|
| Fuel Tank | 15.3gal | 58L |
| Hydraulic Tank | 9.2gal | 34.9L |
| Engine Crankcase | 2.6gal | 9.9L |
| Hydraulic System | 14.5gal | 54.9L |
| Chain Box - Each Side | 1.6gal | 6.1L |
09 Cab Specification
| Rops | SAE J1040 MAY94, ISO 3471:1994 | |
|---|---|---|
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I | |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
10 Dimensions Dimensions
| Length With Bucket | 11.28ft in | 3437mm |
|---|---|---|
| Width Over Tires | 5.5ft in | 1676mm |
| Ground Clearance | 7in | 177.8mm |
| Height To Top Of Cab | 6.5ft in | 1986mm |
| Wheelbase | 3.59ft in | 1094mm |
| Length W/O Bucket | 9.06ft in | 2760mm |
| Clearance At Max Lift And Dump | 7.33ft in | 2240mm |
| Reach At Max Lift And Dump | 30.2in | 766mm |
| Length - With Bucket On Ground | 135.31in | 3436.62mm |
| Length - Without Bucket | 108.7in | 2760.98mm |
| Maximum Dump Angle | 50 degrees | |
| Maximum Reach - With Arms Parallel | 48.4in | 1229.36mm |
| Rack Back Angle - Maximum Height | 86.9 degrees | |
| Reach - Maximum Lift/Dump | 30.2in | 767.08mm |
| Maximum Overall Height | 154.6in | 3926.84mm |
| Bucket Pin Height - Carry Position | 11.8in | 299.73mm |
| Bucket Pin Reach - Maximum Lift | 11.2in | 284.48mm |
| Bumper Overhang - Rear Axle | 38.9in | 988.06mm |
| Clearance At Maximum Lift And Dump | 88in | 2235.2mm |
| Departure Angle | 28 degrees | |
| Turning Radius From Center - Machine Rear | 60.8in | 1545mm |
| Vehicle Width Over Tires | 66in | 1676.4mm |
| Turn Radius From Center - Bucket | 87.4in | 2219.96mm |
| Turn Radius From Center - Coupler | 56.5in | 1435.1mm |
| Turn Radius From Center - Rear | 60.8in | 1544.32mm |
| Turning Radius From Center - Inc Bucket | 87.4in | 2221mm |
11 Operating Specifications Dimensions
| Tipping Load | 4200lb | 1905.09kg |
|---|---|---|
| Breakout Force - Tilt Cylinder | 4060lb | 1841.59kg |
| Rated Operating Capacity | 2100lb | 952.55kg |
?Questions & answersfrom this machine's data
- How much does a Caterpillar 242B Series 2 skid steer weigh?
- A Caterpillar 242B Series 2 skid steer has an operating weight of 6,914 lb (3,136.2 kg).
- How much can a Caterpillar 242B Series 2 skid steer lift?
- A Caterpillar 242B Series 2 skid steer has a rated operating capacity of 2,100 lb (952 kg).
- What engine does a Caterpillar 242B Series 2 skid steer have?
- A Caterpillar 242B Series 2 skid steer is powered by a 3024C T engine producing 57 hp (42 kW).
- What is the ground clearance of a Caterpillar 242B Series 2 skid steer?
- A Caterpillar 242B Series 2 skid steer has a ground clearance of 7 in (177.8 mm).
- How long is a Caterpillar 242B Series 2 skid steer?
- A Caterpillar 242B Series 2 skid steer has an overall length of 11.3 ft (3,437 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.