Specification sheet Skid Steer Loader Ref caterpillar-236b-skid-steer-loader
Caterpillar 236B
The Caterpillar 236B is a skid steer loader with an operating weight of 7,007 lb (3,178.4 kg), a 71.08 hp engine, a rated operating capacity of 1,748.27 lb (793 kg), and a tipping load of 4,012 lb (1,819.82 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,007lb
3,178.4kg
Engine power
71.08hp
53kW
Net Power Rated operating capacity
1,748.27lb
793kg
Tipping load
4,012lb
1,819.82kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Caterpillar 236B sits in the middle of its class:
- Operating weight 7,010 lb heavier than 58% (n=334)
- Engine power 71 hp more powerful than 63% (n=335)
- Rated operating capacity 1,750 lb lower-rated than 62% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3044C DIT | |
| Gross Power | 73hp | 54.5kw |
| Net Power | 71.1hp | 53kw |
| Aspiration | turbocharged | |
| Bore | 3.7in | 94mm |
| Stroke | 4.7in | 119.4mm |
| Gross Power - Sae J1995 | 73hp | 54.5kw |
| Engine Model | Cat 3044C DIT | |
| Engine Power - Iso 14396 | 71hp | 53kw |
| Net Power - Eec 80/1269 | 71hp | 53kw |
| Net Power - Iso 9249 Eec | 71hp | 53kw |
| Net Power - Sae 1349 | 70hp | 52.2kw |
| Net Flywheel Power | 70hp | 52.2kw |
02 Operational Specification
| Operational Weight | 7006.3lb | 3178kg |
|---|---|---|
| Fuel Capacity | 23.8gal | 90L |
| Cooling System Fluid Capacity | 2.7gal | 10L |
| Engine Oil Fluid Capacity | 2.7gal | 10L |
| Hydraulic System Fluid Capacity | 13.8gal | 52L |
| Max Speed | 7.6mph | 12.2km/h |
| Chain Box Fluid Capacity - Each Side | 1.9gal | 7L |
| Tire Size | 12x16.5 10PR | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 90amps |
03 Power Train Specification
| Travel Speed Forward | 7.6mph | 12.3km/h |
|---|---|---|
| Travel Speed Reverse | 7.6mph | 12.3km/h |
| Travel Speed Reverse - 2-Speed Option | 11.6mph | 18.7km/h |
| Travel Speed Forward - 2-Speed Option | 11.6mph | 18.7km/h |
04 Loader Specification
| Breakout Force | 5482.9lb | 2487kg |
|---|---|---|
| Operating Load Rating | 1748.3lb | 793kg |
05 Weights Specification
| Operating Weight | 7007lb | 3178.4kg |
|---|
06 Hydraulic Specification
| Pump Flow Capacity | 22gal/min | 83L/min |
|---|---|---|
| Relief Valve Pressure | 3335.9psi | 23000kPa |
07 Hydraulic System Specification
| Hydraulic Power | 42.8hp | 32kw |
|---|---|---|
| Loader Hydraulic Pressure | 3335 psi | |
| Loader Hydraulic Flow | 22 gal/min | |
| Hydraulic Flow | Standard flow |
08 Service Refill Capacities Specification
| Cooling System | 2.6gal | 9.9L |
|---|---|---|
| Fuel Tank | 23.8gal | 90.1L |
| Hydraulic Tank | 9.2gal | 34.9L |
| Engine Crankcase | 2.6gal | 9.9L |
| Hydraulic System | 13.7gal | 51.9L |
| Chain Box - Each Side | 1.8gal | 6.9L |
09 Cab Specification
| Rops | SAE J1040 MAY94 and ISO 3471:1994 | |
|---|---|---|
| Fops | SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I | |
| Fops Level Ii | SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional) |
10 Dimensions Dimensions
| Length With Bucket | 11.54ft in | 3515mm |
|---|---|---|
| Width Over Tires | 5.5ft in | 1676mm |
| Ground Clearance | 9.31in | 236.22mm |
| Height To Top Of Cab | 6.87ft in | 2092mm |
| Wheelbase | 3.73ft in | 1134mm |
| Length W/O Bucket | 9.19ft in | 2800mm |
| Clearance At Max Lift And Dump | 7.87ft in | 2398mm |
| Reach At Max Lift And Dump | 21.3in | 541mm |
| Maximum Overall Height | 156in | 3962.4mm |
| Maximum Reach - With Arms Parallel | 53in | 1346.2mm |
| Bucket Pin Height - Carry Position | 10in | 254mm |
| Bumper Overhang - Rear Axle | 41in | 1041.41mm |
| Clearance At Maximum Lift And Dump | 94in | 2387.6mm |
| Length - With Bucket On Ground | 138in | 3505.2mm |
| Length - Without Bucket | 110in | 2794mm |
| Turn Radius From Center - Rear | 64in | 1625.6mm |
| Turning Radius From Center - Inc Bucket | 82.56in | 2097mm |
| Turning Radius From Center - Machine Rear | 63.9in | 1623mm |
| Vehicle Width Over Tires | 66in | 1676.4mm |
| Reach - Maximum Lift/Dump | 21in | 533.4mm |
| Turn Radius From Center - Bucket | 83in | 2108.2mm |
| Turn Radius From Center - Coupler | 52in | 1320.8mm |
11 Operating Specifications Dimensions
| Rated Operating Capacity With Optional Counterweight | 1850lb | 839.15kg |
|---|---|---|
| Breakout Force - Lift Cylinder | 4656.16lb | 2112kg |
| Rated Operating Capacity | 1750lb | 793.79kg |
| Tipping Load | 4012lb | 1819.82kg |
| Breakout Force - Tilt Cylinder | 5484lb | 2487.51kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.