Specification sheet Skid Steer Loader Ref caterpillar-216b-skid-steer-loader
Caterpillar 216B
The Caterpillar 216B is a skid steer loader with an operating weight of 5,709 lb (2,589.6 kg), a 49.62 hp engine, a rated operating capacity of 1,399.94 lb (635 kg), and a tipping load of 2,800 lb (1,270.06 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
5,709lb
2,589.6kg
Engine power
49.62hp
37kW
Net Power Rated operating capacity
1,399.94lb
635kg
Tipping load
2,800lb
1,270.06kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Caterpillar 216B sits below the median for its class:
- Operating weight 5,710 lb lighter than 73% (n=334)
- Engine power 50 hp less powerful than 72% (n=335)
- Rated operating capacity 1,400 lb lower-rated than 81% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3024C | |
| Gross Power | 52hp | 38.8kw |
| Net Power | 49.7hp | 37kw |
| Bore | 3.3in | 83.9mm |
| Stroke | 3.9in | 99.1mm |
| Gross Power - Sae J1995 | 52hp | 38.8kw |
| Engine Model | Cat 3024C | |
| Engine Power - Iso 14396 | 51hp | 38.1kw |
| Net Power - Eec 80/1269 | 50hp | 37.3kw |
| Net Power - Iso 9249 Eec | 50hp | 37.3kw |
| Net Power - Sae 1349 | 49hp | 36.6kw |
| Net Flywheel Power | 49hp | 36.6kw |
02 Operational Specification
| Operational Weight | 5707.8lb | 2589kg |
|---|---|---|
| Fuel Capacity | 17.2gal | 65L |
| Cooling System Fluid Capacity | 2.7gal | 10L |
| Engine Oil Fluid Capacity | 2.2gal | 8L |
| Hydraulic System Fluid Capacity | 14.6gal | 55L |
| Max Speed | 7.8mph | 12.5km/h |
| Chain Box Fluid Capacity - Each Side | 1.6gal | 6L |
| Tire Size | 10x16.5 6PR | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps |
03 Power Train Specification
| Travel Speed Forward | 7.9mph | 12.8km/h |
|---|---|---|
| Travel Speed Reverse | 7.9mph | 12.8km/h |
04 Loader Specification
| Breakout Force | 3785.4lb | 1717kg |
|---|---|---|
| Operating Load Rating | 1400lb | 635kg |
05 Weights Specification
| Operating Weight | 5709lb | 2589.6kg |
|---|
06 Hydraulic Specification
| Pump Flow Capacity | 15.9gal/min | 60L/min |
|---|---|---|
| Relief Valve Pressure | 3103.9psi | 21400kPa |
07 Hydraulic System Specification
| Hydraulic Power | 28.2hp | 21.1kw |
|---|---|---|
| Loader Hydraulic Pressure | 3100 psi | |
| Loader Hydraulic Flow | 15.6 gal/min | |
| Hydraulic Flow | Standard flow |
08 Service Refill Capacities Specification
| Cooling System | 2.6gal | 9.9L |
|---|---|---|
| Fuel Tank | 17gal | 64.4L |
| Hydraulic Tank | 9.2gal | 34.9L |
| Engine Crankcase | 2.1gal | 8L |
| Hydraulic System | 14.5gal | 54.9L |
| Chain Box - Each Side | 1.6gal | 6.1L |
09 Cab Specification
| Rops | SAE J1040 MAY94 and ISO3471:1994 | |
|---|---|---|
| Fops | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I | |
| Fops Level Ii | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
10 Dimensions Dimensions
| Length With Bucket | 10.61ft in | 3233mm |
|---|---|---|
| Width Over Tires | 5.01ft in | 1525mm |
| Ground Clearance | 8in | 203.2mm |
| Height To Top Of Cab | 6.4ft in | 1950mm |
| Wheelbase | 3.24ft in | 986mm |
| Length W/O Bucket | 8.27ft in | 2519mm |
| Clearance At Max Lift And Dump | 7.12ft in | 2169mm |
| Reach At Max Lift And Dump | 19.89in | 505mm |
| Maximum Overall Height | 146in | 3708.4mm |
| Maximum Reach - With Arms Parallel | 50.4in | 1280.17mm |
| Bucket Pin Height - Carry Position | 9.31in | 236.22mm |
| Bumper Overhang - Rear Axle | 38in | 965.2mm |
| Clearance At Maximum Lift And Dump | 85in | 2159mm |
| Length - With Bucket On Ground | 127in | 3225.8mm |
| Length - Without Bucket | 99in | 2514.6mm |
| Turn Radius From Center - Rear | 58.5in | 1485.9mm |
| Turning Radius From Center - Inc Bucket | 76.38in | 1940mm |
| Turning Radius From Center - Machine Rear | 58.47in | 1485mm |
| Vehicle Width Over Tires | 60in | 1524mm |
| Reach - Maximum Lift/Dump | 20in | 508mm |
| Turn Radius From Center - Bucket | 76.41in | 1940.56mm |
| Turn Radius From Center - Coupler | 47.2in | 1198.89mm |
11 Operating Specifications Dimensions
| Rated Operating Capacity With Optional Counterweight | 1500lb | 680.39kg |
|---|---|---|
| Breakout Force - Lift Cylinder | 3057lb | 1386.64kg |
| Rated Operating Capacity | 1400lb | 635.03kg |
| Tipping Load | 2800lb | 1270.06kg |
| Breakout Force - Tilt Cylinder | 3787lb | 1717.76kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.