Specification sheet Skid Steer Loader Ref caterpillar-216b-series-3-skid-steer-loader
Caterpillar 216B Series 3
The Caterpillar 216B Series 3 is a skid steer loader with an operating weight of 5,690 lb (2,581 kg), a 47 hp engine, a rated operating capacity of 1,400 lb (635.03 kg), and a tipping load of 2,800 lb (1,270.06 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
5,690lb
2,581kg
Engine power
47hp
35.05kW
Net Power Rated operating capacity
1,400lb
635.03kg
Tipping load
2,800lb
1,270.06kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Caterpillar 216B Series 3 sits below the median for its class:
- Operating weight 5,690 lb lighter than 74% (n=334)
- Engine power 47 hp less powerful than 78% (n=335)
- Rated operating capacity 1,400 lb lower-rated than 81% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | C2.2 | |
| Gross Power | 51hp | 38.1kw |
| Net Power | 47hp | 35.1kw |
| Displacement | 134cu in | 2.2L |
| Bore | 3.3in | 83.9mm |
| Stroke | 3.9in | 99.1mm |
| Gross Power - Sae J1995 | 51hp | 38.1kw |
| Engine Model | Cat C2.2 | |
| Net Flywheel Power | 47hp | 35.1kw |
| Net Power - Sae 1349/Iso 9249 | 47hp | 35.1kw |
02 Operational Specification
| Operational Weight | 5690lb | 2581kg |
|---|---|---|
| Fuel Capacity | 15.4gal | 58L |
| Cooling System Fluid Capacity | 2.7gal | 10L |
| Engine Oil Fluid Capacity | 2.7gal | 10L |
| Hydraulic System Fluid Capacity | 14.6gal | 55L |
| Chain Box Fluid Capacity - Each Side | 1.6gal | 6L |
| Operating Speed | 7.9mph | 12.7km/h |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps |
03 Power Train Specification
| Travel Speed - Forward Or Reverse | 7.9mph | 12.8km/h |
|---|
04 Loader Specification
| Breakout Force | 4083lb | 1852.1kg |
|---|---|---|
| Operating Load Rating | 1400lb | 635.1kg |
05 Weights Specification
| Operating Weight | 5690lb | 2581kg |
|---|
06 Hydraulic Specification
| Pump Flow Capacity | 16gal/min | 60.6L/min |
|---|---|---|
| Relief Valve Pressure | 3335psi | 22994kPa |
07 Hydraulic System Specification
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 3335 psi | |
|---|---|---|
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 16 gal/min | |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 31.1hp | 23.2kw |
08 Service Refill Capacities Specification
| Cooling System | 2.6gal | 9.9L |
|---|---|---|
| Fuel Tank | 15.4gal | 58.3L |
| Hydraulic Tank | 9.2gal | 34.9L |
| Engine Crankcase | 2.6gal | 9.9L |
| Hydraulic System | 14.5gal | 54.9L |
| Chain Box - Each Side | 1.6gal | 6.1L |
09 Cab Specification
| Rops | SAE J1040 MAY94, ISO 3471:1994 | |
|---|---|---|
| Fops | SAE J/ISO 3449 APR98 Level I, ISO 3449:1992 Level I | |
| Fops Level Ii | SAE J/ISO 3449 APR98 Level II, ISO 3449:1992 Level II (optional) |
10 Dimensions Dimensions
| Length With Bucket | 10.61ft in | 3233mm |
|---|---|---|
| Width Over Tires | 5.01ft in | 1525mm |
| Ground Clearance | 8in | 203.2mm |
| Height To Top Of Cab | 6.4ft in | 1950mm |
| Wheelbase | 3.24ft in | 986mm |
| Length W/O Bucket | 8.27ft in | 2519mm |
| Clearance At Max Lift And Dump | 7.12ft in | 2169mm |
| Reach At Max Lift And Dump | 19.89in | 505mm |
| Length - Without Bucket | 99in | 2514.6mm |
| Maimum Reach With Arms Parallel To Ground | 51in | 1295.41mm |
| Maximum Dump Angle | 40 degrees | |
| Rack Back Angle - Maximum Height | 81 degrees | |
| Reach - Maximum Lift/Dump | 20in | 508mm |
| Maximum Overall Height | 146in | 3708.4mm |
| Bucket Pin Height - Carry Position | 8in | 203.2mm |
| Bumper Overhang - Behind Rear Axle | 38in | 965.2mm |
| Clearance At Maximum Lift And Dump | 85.4in | 2169.16mm |
| Departure Angle | 26 degrees | |
| Length - With Bucket On Ground | 127in | 3225.8mm |
| Turning Radius From Center - Inc Bucket | 76.54in | 1944mm |
| Turning Radius From Center - Machine Rear | 59.14in | 1502mm |
| Vehicle Width Over Tires | 60in | 1524mm |
| Turn Radius From Center - Bucket | 77in | 1955.8mm |
| Turn Radius From Center - Coupler | 47in | 1193.8mm |
| Turn Radius From Center - Machine Rear | 59in | 1498.6mm |
11 Operating Specifications Dimensions
| Rated Operating Capacity With Optional Counterweight | 1500lb | 680.39kg |
|---|---|---|
| Tipping Load | 2800lb | 1270.06kg |
| Breakout Force - Tilt Cylinder | 4083lb | 1852.02kg |
| Rated Operating Capacity | 1400lb | 635.03kg |
?Questions & answersfrom this machine's data
- How much does a Caterpillar 216B Series 3 skid steer weigh?
- A Caterpillar 216B Series 3 skid steer has an operating weight of 5,690 lb (2,581 kg).
- How much can a Caterpillar 216B Series 3 skid steer lift?
- A Caterpillar 216B Series 3 skid steer has a rated operating capacity of 1,400 lb (635 kg).
- What engine does a Caterpillar 216B Series 3 skid steer have?
- A Caterpillar 216B Series 3 skid steer is powered by a C2.2 engine producing 47 hp (35.1 kW).
- What is the ground clearance of a Caterpillar 216B Series 3 skid steer?
- A Caterpillar 216B Series 3 skid steer has a ground clearance of 8 in (203.2 mm).
- How long is a Caterpillar 216B Series 3 skid steer?
- A Caterpillar 216B Series 3 skid steer has an overall length of 10.6 ft (3,233 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.