Specification sheet Skid Steer Loader Ref caterpillar-216b-series-2-skid-steer-loader
Caterpillar 216B Series 2
The Caterpillar 216B Series 2 is a skid steer loader with an operating weight of 5,609 lb (2,544.2 kg), a 49 hp engine, a rated operating capacity of 1,400 lb (635 kg), and a tipping load of 2,800 lb (1,270.06 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
5,609lb
2,544.2kg
Engine power
49hp
37kW
Net Power Rated operating capacity
1,400lb
635kg
Tipping load
2,800lb
1,270.06kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Caterpillar 216B Series 2 sits below the median for its class:
- Operating weight 5,610 lb lighter than 75% (n=334)
- Engine power 49 hp less powerful than 75% (n=335)
- Rated operating capacity 1,400 lb lower-rated than 81% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2236 | |
|---|---|---|
| Engine Model | 3024C | |
| Gross Power | 51hp | 38.1kw |
| Net Power | 49hp | 37kw |
| Displacement | 134cu in | 2.2L |
| Bore | 3.3in | 83.9mm |
| Stroke | 3.9in | 99.1mm |
| Gross Power - Sae J1995 | 51hp | 38.1kw |
| Engine Model | Cat C2.2 | |
| Net Power - Sae 1349 | 47hp | 35.1kw |
| Net Flywheel Power | 47hp | 35.1kw |
02 Operational Specification
| Operational Weight | 5609lb | 2581kg |
|---|---|---|
| Fuel Capacity | 15.4gal | 58L |
| Cooling System Fluid Capacity | 2.6gal | 10L |
| Engine Oil Fluid Capacity | 2.6gal | 10L |
| Max Speed | 7mph | 11.3km/h |
| Hydraulic System Fluid Capacity | 14.5gal | 55L |
| Chain Box Fluid Capacity - Each Side | 1.6gal | 6L |
03 Power Train Specification
| Travel Speed Forward | 7mph | 11.3km/h |
|---|---|---|
| Travel Speed Reverse | 7mph | 11.3km/h |
04 Loader Specification
| Breakout Force | 4083lb | 1852kg |
|---|---|---|
| Operating Load Rating | 1400lb | 635kg |
05 Weights Specification
| Operating Weight | 5609lb | 2544.2kg |
|---|
06 Hydraulic Specification
| Pump Flow Capacity | 15.6gal/min | 60L/min |
|---|---|---|
| Relief Valve Pressure | 3335psi | 23000kPa |
07 Hydraulic System Specification
| Hydraulic Power | 30.4hp | 22.7kw |
|---|---|---|
| Loader Hydraulic Pressure | 3335 psi | |
| Loader Hydraulic Flow | 15.6 gal/min | |
| Hydraulic Flow | Standard |
08 Service Refill Capacities Specification
| Cooling System | 2.6gal | 9.9L |
|---|---|---|
| Fuel Tank | 15.4gal | 58.3L |
| Hydraulic Tank | 9.2gal | 34.9L |
| Engine Crankcase | 2.6gal | 9.9L |
| Hydraulic System | 14.5gal | 54.9L |
| Chain Box - Each Side | 1.6gal | 6.1L |
09 Cab Specification
| Rops | SAE J1040 MAY94, ISO 3471:1994 | |
|---|---|---|
| Fops | SAE J1043 SEPT87, ISO 3449:1992 Level I | |
| Fops Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
10 Dimensions Dimensions
| Length With Bucket | 10.58ft in | 3233mm |
|---|---|---|
| Width Over Tires | 5ft in | 1525mm |
| Ground Clearance | 8in | 203.2mm |
| Height To Top Of Cab | 6.42ft in | 1950mm |
| Wheelbase | 3.25ft in | 986mm |
| Length W/O Bucket | 8.25ft in | 2519mm |
| Clearance At Max Lift And Dump | 7.08ft in | 2169mm |
| Reach At Max Lift And Dump | 20in | 505mm |
| Length - Without Bucket | 99in | 2514.6mm |
| Maximum Dump Angle | 40 degrees | |
| Maximum Overall Height | 146in | 3708.4mm |
| Rack Back Angle - Maximum Height | 96.7 degrees | |
| Reach - Maximum Lift/Dump | 20in | 508mm |
| Maximum Reach - With Arms Parallel | 50.4in | 1280.17mm |
| Bucket Pin Height - Carry Position | 9.31in | 236.22mm |
| Bumper Overhang - Rear Axle | 38in | 965.2mm |
| Clearance At Maximum Lift And Dump | 85in | 2159mm |
| Departure Angle | 26 degrees | |
| Length - With Bucket On Ground | 127in | 3225.8mm |
| Turning Radius From Center - Inc Bucket | 76.41in | 1940mm |
| Turning Radius From Center - Machine Rear | 58.5in | 1485mm |
| Vehicle Width Over Tires | 60in | 1524mm |
| Turn Radius From Center - Bucket | 76.41in | 1940.56mm |
| Turn Radius From Center - Coupler | 47.2in | 1198.89mm |
| Turn Radius From Center - Rear | 58.5in | 1485.9mm |
11 Operating Specifications Dimensions
| Rated Operating Capacity With Optional Counterweight | 1500lb | 680.39kg |
|---|---|---|
| Tipping Load | 2800lb | 1270.06kg |
| Breakout Force - Tilt Cylinder | 4083lb | 1852.02kg |
| Rated Operating Capacity | 1400lb | 635.03kg |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.