Specification sheet Compact Track Loader Ref case-tv380-multi-terrain-loader
Case TV380
The Case TV380 is a compact track loader with an operating weight of 10,000 lb (4,535.93 kg), a 84 hp engine, and a rated operating capacity of 2,660 lb (1,206.6 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,000lb
4,535.93kg
Engine power
84hp
62.64kW
Net Power Rated operating capacity
2,660lb
1,206.6kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Case TV380 sits above the median for its class:
- Operating weight 10,000 lb heavier than 67% (n=182)
- Engine power 84 hp more powerful than 78% (n=167)
- Rated operating capacity 2,660 lb higher-rated than 50% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Starter | 4.3hp | 3.2kw |
|---|---|---|
| Radiator Core Type | Aluminum bar and plate | |
| Battery | 12-volt low-maintenance | |
| Number Of Cylinders | 4 | |
| Engine Model | FPT F5B FL413 E B002 | |
| Emissions Compliance | Tier 4 Final Certified (CEGR, DOC, SCR) | |
| Gross Power | 90hp | 67.2kw |
| Net Power | 84hp | 62.7kw |
| Power Measured @ | 2500rpm | |
| Peak Torque | 282lb ft | 382.4Nm |
| Displacement | 207cu in | 3.4L |
| Bore | 3.9in | 99mm |
| Stroke | 4.4in | 110mm |
| Alternator | 160amps | |
| Aspiration | Turbo |
02 Capacities Specification
| Engine Oil With Filter | 2.3gal | 8.5L |
|---|---|---|
| Fuel Tank | 25.5gal | 96.6L |
| Diesel Exhaust Fluid (Def) Tank | 2.8gal | 10.6L |
03 Operational Specification
| Operating Weight | 10000lb | 4536kg |
|---|---|---|
| Lift Configuration | Vertical |
04 Loader Specification
| Straight Tipping Load | 7599.4lb | 3447kg |
|---|---|---|
| Bucket Rollback At Max Height | 86degrees | |
| Linkage Geometry | Vertical | |
| Dump Clearance At Full Height Discharge | 105.2in | 2670mm |
| Rollback - Ground Level | 34.2degrees | |
| Standard Hydraulic Pump Output | 24.2gal/min | 91.7L/min |
| Dump Reach | 31.5in | 800mm |
| High Flow Pump Output | 37.6gal/min | 142.4L/min |
| Breakout Force | 8776lb | 3980.8kg |
| Operating Load | 3800lb | 1723.7kg |
| Operating Load Rating | 2660lb | 1206.6kg |
05 Hydraulic Specification
| Main Relief Pressure | 30.5psi | 210kPa |
|---|---|---|
| Pump Type | Gear | |
| Pump Flow | 24.2gal/min | 91.5L/min |
06 Bucket Specification
| Breakout Force | 8767.6lb | 39kN |
|---|---|---|
| Bucket Width | 6.5ft in | 1980mm |
07 Dimensions Dimensions
| Width Over Tracks | 6.34ft in | 1930mm |
|---|---|---|
| Height To Top Of Cab | 80.32in | 2040mm |
| Ground Clearance | 9.45in | 240mm |
| Overall Length With Foundry/ Excavating Bucket | 141.74in | 3.6m |
| Track Width | 76in | 1.94m |
| Length With Bucket | 11.82ft in | 3600mm |
| Height To Bucket Hinge Pin | 131.5in | 3.34m |
| Height To Top Of Rops | 80.32in | 2.04m |
| Dump Height With Foundry/ Excavating Bucket | 105.12in | 2.67m |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.