Specification sheet Skid Steer Loader Ref case-sv280-skid-steer-loader
Case SV280
The Case SV280 is a skid steer loader with an operating weight of 8,090 lb (3,669.57 kg), and a 68 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,090lb
3,669.57kg
Engine power
68hp
50.71kW
Net Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Case SV280 sits above the median for its class:
- Operating weight 8,090 lb heavier than 81% (n=334)
- Engine power 68 hp more powerful than 54% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Starter | 4.3hp | 3.2kw |
|---|---|---|
| Number Of Cylinders | 4 | |
| Engine Model | F5H FL463 A*F001 | |
| Gross Power | 74hp | 55.2kw |
| Net Power | 68hp | 50.8kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 231.6lb ft | 314Nm |
| Torque Measured @ | 1400rpm | |
| Displacement | 28.7cu in | 0.5L |
| Bore | 3.9in | 99mm |
| Stroke | 4.4in | 110mm |
02 Operational Specification
| Operational Weight | 8090lb | 3669.6kg |
|---|---|---|
| Shipping Weight - Empty | 7665lb | 3476.8kg |
| Fuel Capacity | 25.5gal | 96.5L |
| Engine Oil Fluid Capacity | 2.3gal | 8.5L |
| Hydraulic System Fluid Capacity | 6gal | 22.7L |
| Max Speed | 7mph | 11.3km/h |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 120amps |
03 Hydraulic Specification
| Raise Time | 4.6sec | |
|---|---|---|
| Dump Time | 3.5sec | |
| Displacement-Standard Aux | 2.3cu in | 0.1L |
| Displacement-High-Flow Aux | 1.3cu in | 0.1L |
04 Dimensions Dimensions
| Length With Bucket | 11.82ft in | 3600mm |
|---|---|---|
| Width Over Tires | 5.81ft in | 1770mm |
| Ground Clearance | 7.88in | 200mm |
| Height To Top Of Cab | 13.36ft in | 4070mm |
| Wheelbase | 4.34ft in | 1320mm |
| Length W/O Bucket | 9.81ft in | 2990mm |
| Reach At Max Lift And Dump | 29.14in | 740mm |
| Hinge Pin Height - Fully Raised | 129.93in | 3300mm |
| Height To Top Of Rops | 78.75in | 2000mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.