Specification sheet Skid Steer Loader Ref case-sr210-skid-steer-loader

Case SR210

The Case SR210 is a skid steer loader with an operating weight of 6,966.61 lb (3,160 kg), and a 68 hp engine.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
6,966.61lb
3,160kg
Engine power
68hp
50.71kW
Net Power

Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Case SR210 sits in the middle of its class:

  • Operating weight 6,970 lb heavier than 54% (n=334)
  • Engine power 68 hp more powerful than 54% (n=335)

Not positioned on rated operating capacity — withheld or unpublished for this machine.

Scale drawingdrawn to scale · mm

2000C200D3290A2670B
Side elevation
2000C1780E
Front elevation

01 Engine Specification

Starter 4.3hp 3.2kw
Number Of Cylinders 4
Engine Model FPT F5H FL463 A*F001
Gross Power 74hp 55.2kw
Net Power 68hp 50.8kw
Power Measured @ 2500rpm
Max Torque 231.6lb ft 314Nm
Torque Measured @ 1400rpm
Displacement 207.5cu in 3.4L
Bore 3.9in 99mm
Stroke 4.4in 110mm

02 Operational Specification

Operational Weight 6966.7lb 3160kg
Shipping Weight - Empty 6669lb 3025kg
Fuel Capacity 19.5gal 73.8L
Engine Oil Fluid Capacity 2.5gal 9.4L
Hydraulic System Fluid Capacity 8.6gal 32.2L
Max Speed 7.1mph 11.5km/h
Chain Box Fluid Capacity - Each Side 6.9gal 26L
Operating Voltage 12V
Alternator Supplied Amperage 120amps

03 Loader Specification

Tipping Load (Iso 14397) 4199.9lb 1905kg

04 Hydraulic Specification

Pump Type Gear
Pump Flow Capacity 24.2gal/min 91.5L/min
Relief Valve Pressure 3050psi 21029kPa
Raise Time 3.6sec
Dump Time 2.2sec
Lower Time 1.8sec
Displacement-Standard Aux 2.3cu in 0.1L
Displacement-High-Flow Aux 0.9cu in 0.1L

05 Dimensions Dimensions

Length With Bucket 10.8ft in 3290mm
Width Over Tires 5.84ft in 1780mm
Ground Clearance 7.88in 200mm
Wheelbase 3.71ft in 1130mm
Length W/O Bucket 8.76ft in 2670mm
Hinge Pin Height - Fully Raised 122.84in 3120mm
Height To Top Of Rops 78.75in 2000mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.