Specification sheet Skid Steer Loader Ref case-ih-sv340-skid-steer-loader

Case IH SV340

The Case IH SV340 is a skid steer loader with an operating weight of 9,118.4 lb (4,136 kg), a 84 hp engine, a rated operating capacity of 3,406.2 lb (1,545 kg), and a tipping load of 6,812.3 lb (3,090.01 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
9,118.4lb
4,136kg
Engine power
84hp
62.64kW
Net Power
Rated operating capacity
3,406.2lb
1,545kg
Tipping load
6,812.3lb † — value reconstructed from related published figures
3,090.01kg

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Case IH SV340 sits at the heavy end of its class:

  • Operating weight 9,120 lb heavier than 93% (n=334)
  • Engine power 84 hp more powerful than 87% (n=335)
  • Rated operating capacity 3,410 lb higher-rated than 98% (n=288)

◇Scale drawingdrawn to scale · mm

2000A1770B
Front elevation

01 Engine Specification

Emissions Certification Tier 4 Final (SCR)
Engine Model FPT F5B FL413 E*B002
Gross Power 90hp 67.2kw
Net Power 84hp 62.7kw
Engine Peak Torque 282.5lb ft 383Nm
Displacement 207cu in 3.4L

02 Capacities Specification

Rated Operating Capacity 3406.2lb 1545kg

03 Weights Specification

Operating Weight 9118.4lb 4136kg

04 Lift Specification

Lift Configuration Vertica

05 Hydraulic System Specification

Auxiliary Hydraulic Flow 24.2gal/min 91.7L/min
Optional Auxiliary Hydraulic Pump Flow 38.7gal/min 146.5L/min

06 Bucket Specification

Breakout Force 9531.9lb 42.4kN

07 Dimensions Dimensions

Width Over Tires 5.81ft in 1770mm
Bucket Hinge Pin Fully Raised 10.83ft in 3.3m
Dump Height - Fully Raised, 45° Dump 100.79in 2560mm
Height To Top Of Rops 78.75in 2000mm
Overall Length (W/Bucket) 12.34ft in 3760mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.