The Case IH SR160 is a skid steer loader with an operating weight of 5,522.6 lb (2,505 kg), a 57 hp engine, a rated operating capacity of 1,600.6 lb (726 kg), and a tipping load of 3,207.8 lb (1,455.04 kg).
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Case IH SR160 sits below the median for its class:
Operating weight5,520 lblighter than 78%(n=334)
Engine power57 hpless powerful than 61%(n=335)
Rated operating capacity1,600 lblower-rated than 66%(n=288)
◇Scale drawingdrawn to scale · mm
Front elevation
01 Engine Specification
Emissions Certification
Tier 4 Final (CEGR, DOC, DPF)
Engine Model
ISM N844LT-F
Gross Power
60hp
44.8kw
Net Power
57hp
42.6kw
Engine Peak Torque
139lb ft
188.5Nm
Displacement
135.2cu in
2.3L
02 Capacities Specification
Rated Operating Capacity
1600.6lb
726kg
03 Weights Specification
Operating Weight
5522.6lb
2505kg
04 Lift Specification
Lift Configuration
Radial
05 Hydraulic System Specification
Auxiliary Hydraulic Flow
18.4gal/min
69.7L/min
06 Bucket Specification
Breakout Force
5462.9lb
24.3kN
07 Dimensions Dimensions
B Width Over Tires
4.99ft in
1520mm
Bucket Hinge Pin Fully Raised
9.36ft in
2.85m
Dump Height - Fully Raised, 45° Dump
84.65in
2150mm
A Height To Top Of Rops
75.6in
1920mm
Overall Length (W/Bucket)
10.44ft in
3180mm
Data notes
†
Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.