Case CX60C
The Case CX60C is a mini excavator with an operating weight of 12,941.2 lb, a 63 hp engine, and a dig depth of 11.72 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Case CX60C sits at the heavy end of its class:
- Operating weight 12,940 lb heavier than 93% (n=438)
- Engine power 63 hp more powerful than 97% (n=448)
- Dig depth 11.7 ft deeper-digging than 90% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 18.38ft in | 5,602mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 18.64ft in | 5,681mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.37ft in | 2,551mm‖ — metric converted from the published imperial value |
| Max Loading Height | 12.9ft in | 3,932mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 19.72ft in | 6,011mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 9.98ft in | 3,042mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.72ft in | 3,572mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | 4 ft 10 in (1.48 m) Arm | |
| Max.Dumping Height | 12.9ft in | 3,932mm‖ — metric converted from the published imperial value |
02 Boom/Stick Option (Hex) 2 Specification
| Max Cutting Height | 19.2ft in | 5,852mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Length Of Unit | 18.38ft in | 5,602mm‖ — metric converted from the published imperial value |
| Max Loading Height | 13.46ft in | 4,103mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.37ft in | 2,551mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 20.84ft in | 6,352mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 11.03ft in | 3,362mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 13.1ft in | 3,993mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | 6 ft 3 in (1.9 m) Arm |
03 Dimensions Specification
| Width To Outside Of Tracks | 6.53ft in | 1,990mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 6.53ft in | 1,990mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1.25ft in | 381mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.37ft in | 2,551mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.55ft in | 1,082mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Number Of Track Rollers Per Side | 5 |
|---|
05 Engine Specification
| Fuel | Diesel | |
|---|---|---|
| Fuel Injection | Electronic common rail | |
| Emissions Level | Tier 4 Final | |
| Number Of Cylinders | 4 | |
| Max Speed | 2.5mph | 4km/h‖ — metric converted from the published imperial value |
| Engine Model | Yanmar 4TNV98C | |
| Gross Power | 64.7hp | 48.2kw‖ — metric converted from the published imperial value |
| Cooling System | Water-cooled | |
| Net Power | 63hp | 47kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2400rpm | |
| Displacement | 203cu in | 3,327cm3‖ — metric converted from the published imperial value |
| Max Torque | 173.7lb ft | |
| Torque Measured @ | 1560rpm |
06 Drive Train Specification
| Max Drawbar Pull | 11667.6lb | 5,292.33kg‖ — metric converted from the published imperial value |
|---|---|---|
| Maximum Traction Force | 11680lb | 5,298kg‖ — metric converted from the published imperial value |
| Gradeability | 35degrees | |
| Ground Pressure | 5.2psi | 36kpa‖ — metric converted from the published imperial value |
07 Lift System Specification
| Bucket Breakout Force | 9194.7lb | 4,170.6kg‖ — metric converted from the published imperial value |
|---|---|---|
| Lift Over Side Max. Reach | 1080.3lb | 490.02kg‖ — metric converted from the published imperial value |
| Lift Over End Max. Reach - Lbs | 2711.7lb | 1,230kg‖ — metric converted from the published imperial value |
08 Capacities Specification
| Engine Oil W/ Filter Change | 3.1gal | 12l‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Tank | 21.7gal | 82.1l‖ — metric converted from the published imperial value |
| Hydraulic Tank | 29.1gal | 110l‖ — metric converted from the published imperial value |
| Radiator | 3gal | 11l‖ — metric converted from the published imperial value |
09 Operational Specification
| Operating Weight | 12941.2lb | 5,870.02kg‖ — metric converted from the published imperial value |
|---|
10 Electrical Specification
| Alternator | 80amp | |
|---|---|---|
| Voltage | 12V | |
| Battery | 1 x 12 V x 100 Ah |
11 Swing Mechanism Specification
| Swing Speed | 8.8rpm |
|---|
12 Hydraulic System Specification
| Main Pump - Maximum Flow | 29.1gal/min | 110l/min‖ — metric converted from the published imperial value |
|---|---|---|
| Relief Pressure | 3191 psi, 220 bar |
13 Boom Specification
| Arm Length | 9.6ft in | 2,926mm‖ — metric converted from the published imperial value |
|---|---|---|
| Boom Length | 4.1ft in | 1,250mm‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.