Case CX37C
The Case CX37C is a mini excavator with an operating weight of 8,300.5 lb, a 23.7 hp engine, and a dig depth of 10.29 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Case CX37C sits above the median for its class:
- Operating weight 8,300 lb heavier than 77% (n=438)
- Engine power 24 hp less powerful than 52% (n=448)
- Dig depth 10.3 ft deeper-digging than 67% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 15.72ft in | 4,791mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 15.79ft in | 4,813mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Max Loading Height | 11.24ft in | 3,426mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 17.07ft in | 5,203mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 7.19ft in | 2,192mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 10.29ft in | 3,136mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | 4 ft 3 in (1.3 m) Arm | |
| Max.Dumping Height | 11.24ft in | 3,426mm‖ — metric converted from the published imperial value |
02 Boom/Stick Option (Hex) 2 Specification
| Max Cutting Height | 16.44ft in | 5,011mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Length Of Unit | 15.72ft in | 4,791mm‖ — metric converted from the published imperial value |
| Max Loading Height | 11.24ft in | 3,426mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 18.03ft in | 5,496mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 8.42ft in | 2,566mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.29ft in | 3,441mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | 5 ft 3 in (1.6 m) Arm |
03 Dimensions Specification
| Width To Outside Of Tracks | 5.71ft in | 1,740mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 5.58ft in | 1,701mm‖ — metric converted from the published imperial value |
| Ground Clearance | 0.96ft in | 293mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.86ft in | 872mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Number Of Track Rollers Per Side | 4 |
|---|
05 Engine Specification
| Fuel | Diesel | |
|---|---|---|
| Fuel Injection | Mechanical with electronic governor | |
| Emissions Level | Tier 4 Final | |
| Number Of Cylinders | 3 | |
| Max Speed | 2.6mph | 4.2km/h‖ — metric converted from the published imperial value |
| Engine Model | Yanmar 3TNV88F-ESHYB | |
| Gross Power | 24.4hp | 18.2kw‖ — metric converted from the published imperial value |
| Cooling System | Water-cooled | |
| Net Power | 23.7hp | 17.7kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm | |
| Displacement | 100.2cu in | 1,642cm3‖ — metric converted from the published imperial value |
| Max Torque | 69.5lb ft | |
| Torque Measured @ | 1200rpm |
06 Drive Train Specification
| Max Drawbar Pull | 6834.2lb | 3,099.9kg‖ — metric converted from the published imperial value |
|---|---|---|
| Maximum Traction Force | 6835lb | 3,100kg‖ — metric converted from the published imperial value |
| Gradeability | 30degrees | |
| Ground Pressure | 4.9psi | 34kpa‖ — metric converted from the published imperial value |
07 Lift System Specification
| Bucket Breakout Force | 6901.7lb | 3,130.6kg‖ — metric converted from the published imperial value |
|---|---|---|
| Lift Over Side Max. Reach | 749.6lb | 340kg‖ — metric converted from the published imperial value |
| Lift Over End Max. Reach - Lbs | 1322.8lb | 600.01kg‖ — metric converted from the published imperial value |
08 Capacities Specification
| Engine Oil W/ Filter Change | 1.8gal | 6.8l‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Tank | 10.6gal | 40.1l‖ — metric converted from the published imperial value |
| Hydraulic Tank | 15.9gal | 60.2l‖ — metric converted from the published imperial value |
| Radiator | 1.5gal | 5.7l‖ — metric converted from the published imperial value |
09 Operational Specification
| Operating Weight | 8300.5lb | 3,765kg‖ — metric converted from the published imperial value |
|---|
10 Electrical Specification
| Alternator | 55amp | |
|---|---|---|
| Voltage | 12V | |
| Battery | 1 x 12 V x 70 Ah |
11 Swing Mechanism Specification
| Swing Speed | 9.5rpm |
|---|
12 Hydraulic System Specification
| Main Pump - Maximum Flow | 19.8gal/min | 75l/min‖ — metric converted from the published imperial value |
|---|---|---|
| Relief Pressure | 3270 psi, 230 bar |
13 Boom Specification
| Arm Length | 8.2ft in | 2,499mm‖ — metric converted from the published imperial value |
|---|---|---|
| Boom Length | 4.3ft in | 1,311mm‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.