Case CX31
The Case CX31 is a mini excavator with an operating weight of 6,614 lb, a 22.7 hp engine, and a dig depth of 9.26 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Case CX31 sits in the middle of its class:
- Operating weight 6,610 lb heavier than 51% (n=438)
- Engine power 23 hp less powerful than 59% (n=448)
- Dig depth 9.3 ft deeper-digging than 52% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 14.57ft in | 4,441mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 14.77ft in | 4,502mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.24ft in | 2,512mm‖ — metric converted from the published imperial value |
| Max Loading Height | 10.34ft in | 3,152mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 15.75ft in | 4,801mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 7.09ft in | 2,161mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 9.26ft in | 2,822mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Boom 7'7" (2310mm)/ Stick 3'11" (1190mm) |
02 Dimensions Specification
| Width To Outside Of Tracks | 5.09ft in | 1,551mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 5.06ft in | 1,542mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1.05ft in | 320mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.24ft in | 2,512mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.55ft in | 777mm‖ — metric converted from the published imperial value |
| Removal Counterweight Clearance | 1.86ft in | 567mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 11.82in | 300.2mm‖ — metric converted from the published imperial value |
|---|---|---|
| Number Of Carrier Rollers Per Side | 1 | |
| Ground Pressure | 4.2psi | 29kpa‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.8mph | 4.5km/h‖ — metric converted from the published imperial value |
| Number Of Track Rollers Per Side | 4 |
04 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 3TNE82A | |
| Net Power | 22.7hp | 16.9kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2300rpm | |
| Displacement | 81.1cu in | 1,329cm3‖ — metric converted from the published imperial value |
| Max Torque | 58.6lb ft | |
| Torque Measured @ | 1400rpm |
05 Operational Specification
| Operating Weight | 6614lb | 3,000kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 10gal | 38l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 0.7gal | 3l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 12.7gal | 48.1l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 1gal | 4l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 24amps | |
| Hydraulic System Relief Valve Pressure | 3277psi | 22,594kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 16.6gal/min | 62.8l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 9rpm |
|---|
07 Buckets Specification
| Reference Bucket Capacity | 0.2yd3 | |
|---|---|---|
| Minimum Bucket Capacity | 0.1yd3 | |
| Maximum Bucket Capacity | 0.2yd3 |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.