Case CX30C
The Case CX30C is a mini excavator with an operating weight of 6,636 lb, a 23.2 hp engine, and a dig depth of 8.21 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Case CX30C sits in the middle of its class:
- Operating weight 6,640 lb heavier than 51% (n=438)
- Engine power 23 hp less powerful than 56% (n=448)
- Dig depth 8.2 ft shallower-digging than 65% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 13.72ft in | 4,182mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 14.01ft in | 4,270mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Max Loading Height | 9.62ft in | 2,932mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 14.82ft in | 4,517mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 6.85ft in | 2,088mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | 3 ft 8 in (1.12 m) Arm |
02 Dimensions Specification
| Width To Outside Of Tracks | 5.09ft in | 1,551mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 4.89ft in | 1,490mm‖ — metric converted from the published imperial value |
| Ground Clearance | 0.96ft in | 293mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.47ft in | 753mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Number Of Track Rollers Per Side | 4 |
|---|
04 Engine Specification
| Fuel | Diesel | |
|---|---|---|
| Fuel Injection | Mechanical | |
| Emissions Level | Tier 4 Final | |
| Number Of Cylinders | 3 | |
| Max Speed | 2.7mph | 4.3km/h‖ — metric converted from the published imperial value |
| Engine Model | Kubota D1305 | |
| Gross Power | 24.8hp | 18.5kw‖ — metric converted from the published imperial value |
| Cooling System | Water-cooled | |
| Net Power | 23.2hp | 17.3kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2300rpm | |
| Displacement | 77cu in | 1,262cm3‖ — metric converted from the published imperial value |
| Max Torque | 60.1lb ft | |
| Torque Measured @ | 1600rpm |
05 Drive Train Specification
| Maximum Traction Force | 4800lb | 2,177kg‖ — metric converted from the published imperial value |
|---|---|---|
| Gradeability | 30degrees | |
| Ground Pressure | 4.1psi | 28kpa‖ — metric converted from the published imperial value |
06 Capacities Specification
| Engine Oil W/ Filter Change | 1.6gal | 6.1l‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Tank | 8gal | 30l‖ — metric converted from the published imperial value |
| Hydraulic Tank | 14.6gal | 55.3l‖ — metric converted from the published imperial value |
| Radiator | 1.4gal | 5.3l‖ — metric converted from the published imperial value |
07 Operational Specification
| Operating Weight | 6636lb | 3,010kg‖ — metric converted from the published imperial value |
|---|
08 Electrical Specification
| Alternator | 40amp | |
|---|---|---|
| Voltage | 12V | |
| Battery | 1 x 12 V x 80 Ah |
09 Swing Mechanism Specification
| Swing Speed | 9.1rpm |
|---|
10 Hydraulic System Specification
| Main Pump - Maximum Flow | 14.6gal/min | 55.3l/min‖ — metric converted from the published imperial value |
|---|---|---|
| Relief Pressure | 3130 psi, 220 bar |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.