Case CX22B
The Case CX22B is a mini excavator with a 23 hp engine, and a dig depth of 7.55 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Case CX22B sits in the middle of its class:
- Engine power 23 hp less powerful than 59% (n=448)
- Dig depth 7.6 ft shallower-digging than 79% (n=426)
Not positioned on operating weight — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Max Reach Along Ground | 13.33ft in | 4,063mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Vertical Wall Digging Depth | 5.88ft in | 1,792mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 7.55ft in | 2,301mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 4.6ft in | 1,402mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 4.89ft in | 1,490mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1.58ft in | 482mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.08ft in | 2,463mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.43ft in | 741mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Track Gauge | 3.78ft in | 1,152mm‖ — metric converted from the published imperial value |
|---|
04 Engine Specification
| Engine Make | 2348 | |
|---|---|---|
| Engine Model | 3TNV82A-SYB | |
| Net Power | 23hp | 17kw‖ — metric converted from the published imperial value |
| Displacement | 1330cu in | 21,795cm3‖ — metric converted from the published imperial value |
| Max Torque | 59.1lb ft |
05 Operational Specification
| Fuel Capacity | 7.4gal | 28l‖ — metric converted from the published imperial value |
|---|---|---|
| Cooling System Fluid Capacity | 1.1gal | 4.2l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 6.7gal | 25l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 1.5gal | 5.7l‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 6.9gal/min | 26l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 8.7rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.