Case CX20B
The Case CX20B is a mini excavator with an operating weight of 4,629.8 lb, a 23 hp engine, and a dig depth of 7.55 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Case CX20B sits below the median for its class:
- Operating weight 4,630 lb lighter than 69% (n=438)
- Engine power 23 hp less powerful than 59% (n=448)
- Dig depth 7.6 ft shallower-digging than 79% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Max Cutting Height | 13ft in | 3,962mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 8.93ft in | 2,722mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 13.75ft in | 4,191mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 5.88ft in | 1,792mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 7.55ft in | 2,301mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Std. Dipper 0.98M |
02 Boom/Stick Option (Hex) 2 Specification
| Max Cutting Height | 13.75ft in | 4,191mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 9.68ft in | 2,950mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 14.83ft in | 4,520mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 6.99ft in | 2,131mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 8.7ft in | 2,652mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | Long Dipper 1.33M |
03 Dimensions Specification
| Width To Outside Of Tracks | 4.6ft in | 1,402mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 4.89ft in | 1,490mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1.58ft in | 482mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.08ft in | 2,463mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.3ft in | 701mm‖ — metric converted from the published imperial value |
| Removal Counterweight Clearance | 1.58ft in | 482mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Shoe Size | 9.85in | 250mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 3.78ft in | 1,152mm‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.55mph | 4.1km/h‖ — metric converted from the published imperial value |
05 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 3TNV82A-SYB | |
| Net Power | 23hp | 17kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm | |
| Displacement | 81.2cu in | 1,331cm3‖ — metric converted from the published imperial value |
| Max Torque | 59.1lb ft | |
| Torque Measured @ | 1320rpm |
06 Operational Specification
| Operating Weight | 4629.8lb | 2,100kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 7.4gal | 28l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 1.1gal | 4.2l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 6.7gal | 25l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 1.5gal | 5.7l‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 6.9gal/min | 26l/min‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.