Specification sheet Wheel Loader Ref case-921cxr-wheel-loader
Case 921CXR
The Case 921CXR is a wheel loader with an operating weight of 24,250 lb (10,999.62 kg), and a 271 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
24,250lb
10,999.62kg
Engine power
271hp
202.1kW
Net Power ◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Case 921CXR sits at the compact end of its class:
- Operating weight 24,250 lb lighter than 88% (n=439)
- Engine power 271 hp more powerful than 99% (n=408)
Not positioned on bucket capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2347 | |
|---|---|---|
| Engine Model | QSM11-C | |
| Net Power | 271hp | 202.1kw |
| Gross Power | 290hp | 216.3kw |
| Max Torque | 986.2lb ft | 1337Nm |
| Displacement | 659.1cu in | 10.8L |
02 Operational Specification
| Operating Weight | 24250lb | 10999.7kg |
|---|---|---|
| Fuel Capacity | 104.1gal | 394L |
| Hydraulic System Fluid Capacity | 64gal | 242L |
| Engine Oil Fluid Capacity | 9.8gal | 37L |
| Cooling System Fluid Capacity | 15.1gal | 57L |
| Front Axle/Diff Fluid Capacity | 12.5gal | 47L |
| Rear Axle/Diff Fluid Capacity | 14.1gal | 53L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Tire Size | 26.5 R 25 |
03 Transmission Specification
| Transmission Type | Powershift Gearbox | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.2mph | 38.8km/h |
| Max Speed - Reverse | 16.6mph | 26.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2842.8psi | 19600kPa |
|---|---|---|
| Pump Flow Capacity | 38.1gal/min | 144L/min |
| Raise Time | 6.2sec | |
| Dump Time | 1.5sec | |
| Lower Time | 3.7sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 11.98ft in | 3650mm |
|---|---|---|
| Breakout Force | 22020lb | 22020- |
| Bucket Width | 9.85ft in | 3000mm |
06 Dimensions Dimensions
| Ground Clearance | 1.45ft in | 440mm |
|---|---|---|
| Length With Bucket On Ground | 30.09ft in | 9170mm |
| Height To Top Of Cab | 11.68ft in | 3560mm |
| Wheelbase | 11.16ft in | 3400mm |
| Hinge Pin - Max Height | 15.82ft in | 4820mm |
| Reach At Max Lift And Dump | 7.39ft in | 2250mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.