Specification sheet Wheel Loader Ref case-821g-wheel-loader
Case 821G
The Case 821G is a wheel loader with an operating weight of 40,058 lb (18,170 kg), a 206 hp engine, a tipping load of 28,503.6 lb (12,929 kg), and a 4.19 yd³ (3.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
40,058lb
18,170kg
Engine power
206hp
153.7kW
Net Power Tipping load
28,503.6lb
12,929kg
Bucket capacity
4.19yd³
3.2m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Case 821G sits above the median for its class:
- Operating weight 40,060 lb heavier than 85% (n=439)
- Engine power 206 hp more powerful than 82% (n=408)
- Bucket capacity 4.2 yd³ larger-bucket than 82% (n=387)
◇Scale drawingdrawn to scale · mm
01 Hydraulic Cycle Times (Unloaded) Specification
| Total Cycle Time | 9.9sec |
|---|
02 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Rated Engine Speed | 2000rpm | |
| Engine Model | FPT F4HFE613S | |
| Net Power | 206hp | 153.7kw |
| Gross Power | 230hp | 171.6kw |
| Max Torque | 873.3lb ft | 1184Nm |
| Displacement | 411cu in | 6.8L |
| Torque Rise | 47% | |
| Emissions | Tier 4 | |
| Alternator | 120amps |
03 Operational Specification
| Def Tank Capacity | 15.6gal | 58.9L |
|---|---|---|
| Operating Weight | 40058lb | 18170kg |
| Fuel Capacity | 76.1gal | 288L |
| Cooling System Fluid Capacity | 8gal | 30L |
| Transmission Fluid Capacity | 9.1gal | 34.1L |
| Front Axle/Diff Fluid Capacity | 10.6gal | 40L |
| Rear Axle/Diff Fluid Capacity | 10.6gal | 40L |
| Operating Voltage | 24V | |
| Rear Axle Oscillation | 24degrees |
04 Performance Specification
| Tipping Load | 28503.6lb | 12929kg |
|---|---|---|
| Bucket Breakout Force, Sae | 35272.6lb | 156.9kN |
05 Transmission Specification
| Differential Lock | F: LSD / R: LSD | |
|---|---|---|
| Transmission Type | Powershift | |
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.8mph | 36.7km/h |
06 Hydraulic System Specification
| Steering Pump Type | Articulation | |
|---|---|---|
| Maximum System Pressure | 3625psi | 24993.5kPa |
| Pump Flow Capacity | 31.8gal/min | 120L/min |
| Pump Type | Piston |
07 Brakes Specification
| Service Brake | Wet Multi Disc |
|---|
08 Bucket Dimensions
| Bucket Capacity - Heaped | 4.19yd3 | 3.2m3 |
|---|---|---|
| Breakout Force | 35272.53lb | 156.9kN |
09 Dimensions Dimensions
| Ground Clearance | 1.42ft in | 431mm |
|---|---|---|
| Width Over Tires | 9.29ft in | 2829mm |
| Height To Top Of Cab | 11.26ft in | 3430mm |
| Wheelbase | 10.96ft in | 3340mm |
| Hinge Pin - Max Height | 13.52ft in | 4120mm |
| Reach At Max Lift And Dump | 5.57ft in | 1696mm |
| Overall Width Without Bucket | 111.38in | 2829mm |
| Turning Radius Outside Tires | 19.7ft in | 6003mm |
| Dump Reach @ Full Height, 45° Dump: Bucket | 3.62ft in | 1.11m |
| Bucket Reach - Fully Raised, 45° Dump | 43.39in | 1102mm |
| Dump Height - Fully Raised, 45° Dump | 117.37in | 2981mm |
| Operating Height - Fully Raised With Spillgaurd | 215.4in | 5471mm |
| Overall Length (L/Bucket) | 26.26ft in | 8004mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.