Specification sheet Wheel Loader Ref case-821f-wheel-loader
Case 821F
The Case 821F is a wheel loader with an operating weight of 38,874 lb (17,632.96 kg), a 205 hp engine, and a 4.1 yd³ (3.14 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
38,874lb
17,632.96kg
Engine power
205hp
152.9kW
Net Power Bucket capacity
4.1yd³
3.14m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Case 821F sits above the median for its class:
- Operating weight 38,870 lb heavier than 80% (n=439)
- Engine power 205 hp more powerful than 80% (n=408)
- Bucket capacity 4.1 yd³ larger-bucket than 81% (n=387)
◇Scale drawingdrawn to scale · mm
01 Hydraulic Cycle Times (Unloaded) Specification
| Total Cycle Time | 9.9sec |
|---|
02 Engine Specification
| Emissions Level | Tier 4 | |
|---|---|---|
| Engine Speed - Rated Speed, Full Load | 2000rpm | |
| Number Of Cylinders | 6 | |
| Max. Torque Iso14396 | 873.3lb ft | 1184Nm |
| Engine Model | FPT F4HFE613 | |
| Net Power | 205hp | 152.9kw |
| Gross Power | 231hp | 172.3kw |
| Power Measured @ | 1800rpm | |
| Max Torque | 845lb ft | 1145.7Nm |
| Displacement | 411cu in | 6.8L |
| Torque Measured @ | 1300rpm | |
| Aspiration | Turbocharged | |
| Torque Rise | 47% | |
| Alternator | 120amps |
03 Operational Specification
| Operating Weight | 38874lb | 17633kg |
|---|---|---|
| Fuel Capacity | 76.1gal | 288.1L |
| Hydraulic System Fluid Capacity | 47gal | 178L |
| Engine Oil Fluid Capacity | 4gal | 15.1L |
| Cooling System Fluid Capacity | 8gal | 30L |
| Transmission Fluid Capacity | 9.1gal | 34.1L |
| Front Axle/Diff Fluid Capacity | 10.6gal | 40L |
| Rear Axle/Diff Fluid Capacity | 10.6gal | 40L |
| Static Tipping Weight | 27224.9lb | 12349kg |
| Turning Radius | 19.8ft in | 6032mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 23.5 x 25 L3 |
04 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.7mph | 36.6km/h |
| Max Speed - Reverse | 15.2mph | 24.5km/h |
05 Hydraulic System Specification
| Steering Pump Type | Articulation | |
|---|---|---|
| Maximum System Pressure | 3625psi | 24993.5kPa |
| Relief Valve Setting | 3625psi | 24993.5kPa |
| Pump Flow Capacity | 31.8gal/min | 120L/min |
| Raise Time | 6.2sec | |
| Dump Time | 1.2sec | |
| Lower Time | 2.5sec | |
| Pump Type | Axial Piston Pump |
06 Brakes Specification
| Service Brake | Wet Multi Disc |
|---|
07 Bucket Dimensions
| Dump Clearance At Max Raise | 9.79ft in | 2983mm |
|---|---|---|
| Breakout Force | 35317.49lb | 157.1kN |
| Bucket Capacity - Heaped | 4.1yd3 | 3.14m3 |
| Bucket Capacity - Struck | 3.54yd3 | 2.71m3 |
| Bucket Width | 9.95ft in | 3030mm |
08 Dimensions Dimensions
| Ground Clearance | 1.37ft in | 415mm |
|---|---|---|
| Length With Bucket On Ground | 25.79ft in | 7859mm |
| Width Over Tires | 9.47ft in | 2885mm |
| Height To Top Of Cab | 11.32ft in | 3450mm |
| Wheelbase | 10.96ft in | 3340mm |
| Hinge Pin - Max Height | 13.53ft in | 4123mm |
| Reach At Max Lift And Dump | 3.62ft in | 1103mm |
| Dump Reach @ Full Height, 45° Dump: Bucket | 3.64ft in | 1.11m |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.