Specification sheet Wheel Loader Ref case-821b-wheel-loader
Case 821B
The Case 821B is a wheel loader with an operating weight of 37,039.87 lb (16,801 kg), a 185.1 hp engine, and a 3.54 yd³ (2.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
37,039.87lb
16,801kg
Engine power
185.1hp
138kW
Net Power Bucket capacity
3.54yd³
2.7m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Case 821B sits above the median for its class:
- Operating weight 37,040 lb heavier than 74% (n=439)
- Engine power 185 hp more powerful than 69% (n=408)
- Bucket capacity 3.5 yd³ larger-bucket than 61% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Max Torque Iso Tr14396 | 591.6lb ft | 802Nm |
| Engine Model | 6T-830 | |
| Engine Type | 4 stroke Direct injection | |
| Net Power | 185.1hp | 138kw |
| Gross Power | 198.5hp | 148kw |
| Power Measured @ | 2000rpm | |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharged | |
| Bore | 4.5in | 114mm |
| Stroke | 5.4in | 135mm |
02 Operational Specification
| Operating Weight | 37039.9lb | 16801kg |
|---|---|---|
| Fuel Capacity | 70.8gal | 268L |
| Engine Oil Fluid Capacity | 5.5gal | 20.8L |
| Cooling System Fluid Capacity | 8.5gal | 32.1L |
| Transmission Fluid Capacity | 7.1gal | 26.5L |
| Front Axle/Diff Fluid Capacity | 5.6gal | 21L |
| Rear Axle/Diff Fluid Capacity | 4gal | 15L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps |
03 Transmission Specification
| Transmission Type | Mechanical | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.8mph | 38.4km/h |
| Max Speed - Reverse | 15.5mph | 24.8km/h |
04 Hydraulic System Specification
| Pump Flow Capacity | 79.3gal/min | 300L/min |
|---|---|---|
| Raise Time | 6.2sec | |
| Dump Time | 1.6sec | |
| Lower Time | 3.8sec | |
| Pump Type | Hydraulic tandem pump |
05 Bucket Dimensions
| Bucket Capacity - Heaped | 3.54yd3 | 2.7m3 |
|---|---|---|
| Bucket Capacity - Struck | 3.01yd3 | 2.3m3 |
| Bucket Width | 9.09ft in | 2770mm |
| Breakout Force | 37109.21lb | 165.07kN |
06 Dimensions Dimensions
| Ground Clearance | 1.32ft in | 401mm |
|---|---|---|
| Length With Bucket On Ground | 24.51ft in | 7470mm |
| Width Over Tires | 8.86ft in | 2700mm |
| Height To Top Of Cab | 10.93ft in | 3330mm |
| Wheelbase | 10.47ft in | 3190mm |
| Hinge Pin - Max Height | 12.96ft in | 3950mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.